scispace - formally typeset
Journal ArticleDOI

Numerical analysis of hydrogen transport near a blunting crack tip

TLDR
In this paper, Oriani's equilibrium theory is used to relate the hydrogen in traps (micro-structural defects) to concentration in normal interstitial lattice sites (NILS), and the resulting non-linear transient hydrogen diffusion equations are integrated using a modified backward Euler method.
Abstract
T he hydrogen transport problem is studied in conjunction with large deformation elastic—plastic behavior of a material. Oriani's equilibrium theory is used to relate the hydrogen in traps (micro-structural defects) to concentration in normal interstitial lattice sites (NILS). The resulting non-linear transient hydrogen diffusion equations are integrated using a modified backward Euler method. Coupled diffusion and plastic straining is analysed with this numerical procedure in the area around a blunting crack tip. A uniform NILS concentration as dictated by Sievert's law at the pressure and temperature of interest is used as initial condition throughout the body. The crack is initially blunted by plane strain mode I (tensile) loading. The finite element results show that hydrogen residing at NILS is generally very small in comparison with the population that develops in trapping sites near the crack surface. That is, lattice diffusion delivers the hydrogen but it is predominantly the trapping that determines its distribution at temperatures of interest. The predominance of trapped hydrogen over lattice concentration prevails even in the case when hydrogen migrates under steady state conditions. Hence, the hydrostatic stress effect is less important than traps created by plastic straining as far as the creation of high total hydrogen concentration is concerned. The trapping site locations and the temperature determine the amounts and locations of high hydrogen concentrations. Consequently, ahead of a blunting crack tip, the total hydrogen concentration and plastic strain diminish with distance from the crack tip whereas the hydrostatic stress rises. This would seem to have significant consequences for fractures induced by the presence of hydrogen.

read more

Citations
More filters
Journal ArticleDOI

Numerical Analysis of the Coupling between Hydrogen Diffusion and Mechanical Behavior near the Crack Tip of Titanium

TL;DR: In this article, a mechanic-diffusion coupled model was proposed to describe the stress effects on the diffusion of hydrogen in titanium, where the hydrogen atoms were assumed to reside in interstitial sites and in trapping sites such as dislocations.
Journal ArticleDOI

Diffusion and redistribution of hydrogen atoms in the vicinity of localized deformation zones

TL;DR: In this article , a non-local crystal plasticity finite element model is coupled with hydrogen diffusion equations to study the effects of such parameters on the stress-assisted diffusion of hydrogen atoms in zirconium polycrystals.
Journal ArticleDOI

Effects of anisotropy and regime of diffusion on the measurement of lattice diffusion coefficient of hydrogen in metals

TL;DR: The lattice diffusion coefficient of hydrogen in metals is commonly measured by permeation tests as discussed by the authors, which assume isotropic diffusivity with a set-up which measures permeation flux only along one...
Journal ArticleDOI

Modeling of Hydrogen Effects on the Thermomechanical Behavior of NiTi-Based Shape Memory Alloys

TL;DR: In this article, a coupled chemo-thermomechanical constitutive model for NiTi shape memory alloys (SMAs) orthodontic wires is proposed, where the weak form of equilibrium equations for each field (thermal, mechanical and chemical) through 2D domain is discretized and numerically solved.

Atomistic mechanisms of hydrogen embrittlement

A. Tehranchi
TL;DR: In this article, the effect of H atoms on the formation of intergranular cracks in Ni and Ni alloys has been investigated using atomistic simulations, and it was shown that H atoms are not responsible for the embrittlement of Ni.
References
More filters
Book

The finite element method

TL;DR: In this article, the methodes are numeriques and the fonction de forme reference record created on 2005-11-18, modified on 2016-08-08.
Journal ArticleDOI

A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks

TL;DR: In this paper, an integral is exhibited which has the same value for all paths surrounding a class of notches in two-dimensional deformation fields of linear or non-linear elastic materials.
Journal ArticleDOI

Effects of hydrogen on the properties of iron and steel

TL;DR: In this paper, the effects of hydrogen on the physical and mechanical properties of iron and steel are reviewed and a new mechanism for the cold work peak for hydrogen in iron is considered.
Journal ArticleDOI

The diffusion and trapping of hydrogen in steel

TL;DR: In this paper, the mobility of dissolved hydrogen in an iron lattice having a population of extraordinary, or trapping, sites for hydrogen is analyzed under the assumption of local equilibrium between the mobile and the trapped populations.
Book

Hydrogen in metals

Related Papers (5)