scispace - formally typeset
Journal ArticleDOI

Numerical analysis of hydrogen transport near a blunting crack tip

TLDR
In this paper, Oriani's equilibrium theory is used to relate the hydrogen in traps (micro-structural defects) to concentration in normal interstitial lattice sites (NILS), and the resulting non-linear transient hydrogen diffusion equations are integrated using a modified backward Euler method.
Abstract
T he hydrogen transport problem is studied in conjunction with large deformation elastic—plastic behavior of a material. Oriani's equilibrium theory is used to relate the hydrogen in traps (micro-structural defects) to concentration in normal interstitial lattice sites (NILS). The resulting non-linear transient hydrogen diffusion equations are integrated using a modified backward Euler method. Coupled diffusion and plastic straining is analysed with this numerical procedure in the area around a blunting crack tip. A uniform NILS concentration as dictated by Sievert's law at the pressure and temperature of interest is used as initial condition throughout the body. The crack is initially blunted by plane strain mode I (tensile) loading. The finite element results show that hydrogen residing at NILS is generally very small in comparison with the population that develops in trapping sites near the crack surface. That is, lattice diffusion delivers the hydrogen but it is predominantly the trapping that determines its distribution at temperatures of interest. The predominance of trapped hydrogen over lattice concentration prevails even in the case when hydrogen migrates under steady state conditions. Hence, the hydrostatic stress effect is less important than traps created by plastic straining as far as the creation of high total hydrogen concentration is concerned. The trapping site locations and the temperature determine the amounts and locations of high hydrogen concentrations. Consequently, ahead of a blunting crack tip, the total hydrogen concentration and plastic strain diminish with distance from the crack tip whereas the hydrostatic stress rises. This would seem to have significant consequences for fractures induced by the presence of hydrogen.

read more

Citations
More filters
Journal ArticleDOI

Three-dimensional numerical simulation of hydrogen-induced multi-field coupling behavior in cracked zircaloy cladding tubes

TL;DR: In this paper, a multi-field coupling method was developed to simulate the hydrogen-induced complex behavior in Zircaloy cladding tubes, with the irradiation hardening effects and hydride-precipitation-induced expansion and hardening effect involved in the mechanical constitutive relation.
Journal ArticleDOI

In Situ Scanning Electron Microscope Observation and Finite Element Method Analysis of Delayed Hydride Cracking Propagation in Zircaloy-2 Fuel Cladding Tubes

TL;DR: In this article, a model for delayed hydride cracking (DHC) of zirconium alloys is presented, where the authors show that a sharply tipped crack propagates at a relatively high rate, while the velocity decreased when the crack tip was blunted, supporting the occurrence of intermittent crack propagation.
Journal ArticleDOI

Hydrogen Effect on the Fatigue Crack Growth in Austenitic Stainless Steel Investigated by a New Method Based on Nanohardness Distribution

TL;DR: In this paper, a new method of nanohardness distribution for investigating the hydrogen effect on the fatigue crack in austenitic stainless steels was developed, which revealed that hydrogen reduces the size of the estimated plastic zone around the fracture tip, especially in the specimen tested in hydrogen gas environment.
Journal ArticleDOI

A Critical Review of Existing Hydrogen Diffusion Models Accounting for Different Physical Variables

TL;DR: In this paper, a model of trap-affected hydrogen diffusion assisted by the gradients of both hydrostatic stress and cumulative plastic strain, stress-and-strain assisted hydrogen diffusion, proposed and frequently used by the authors of the present paper (Toribio & Kharin) is analysed in addition to other well-known models such as those proposed by (i) McNabb & Foster, Oriani, Leblond & Dubois, (iii) Leblonde, (iv) Sofronis & McMeeking, (v) Krom and Bakker
References
More filters
Book

The finite element method

TL;DR: In this article, the methodes are numeriques and the fonction de forme reference record created on 2005-11-18, modified on 2016-08-08.
Journal ArticleDOI

A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks

TL;DR: In this paper, an integral is exhibited which has the same value for all paths surrounding a class of notches in two-dimensional deformation fields of linear or non-linear elastic materials.
Journal ArticleDOI

Effects of hydrogen on the properties of iron and steel

TL;DR: In this paper, the effects of hydrogen on the physical and mechanical properties of iron and steel are reviewed and a new mechanism for the cold work peak for hydrogen in iron is considered.
Journal ArticleDOI

The diffusion and trapping of hydrogen in steel

TL;DR: In this paper, the mobility of dissolved hydrogen in an iron lattice having a population of extraordinary, or trapping, sites for hydrogen is analyzed under the assumption of local equilibrium between the mobile and the trapped populations.
Book

Hydrogen in metals

Related Papers (5)