scispace - formally typeset
Journal ArticleDOI

Numerical analysis of hydrogen transport near a blunting crack tip

TLDR
In this paper, Oriani's equilibrium theory is used to relate the hydrogen in traps (micro-structural defects) to concentration in normal interstitial lattice sites (NILS), and the resulting non-linear transient hydrogen diffusion equations are integrated using a modified backward Euler method.
Abstract
T he hydrogen transport problem is studied in conjunction with large deformation elastic—plastic behavior of a material. Oriani's equilibrium theory is used to relate the hydrogen in traps (micro-structural defects) to concentration in normal interstitial lattice sites (NILS). The resulting non-linear transient hydrogen diffusion equations are integrated using a modified backward Euler method. Coupled diffusion and plastic straining is analysed with this numerical procedure in the area around a blunting crack tip. A uniform NILS concentration as dictated by Sievert's law at the pressure and temperature of interest is used as initial condition throughout the body. The crack is initially blunted by plane strain mode I (tensile) loading. The finite element results show that hydrogen residing at NILS is generally very small in comparison with the population that develops in trapping sites near the crack surface. That is, lattice diffusion delivers the hydrogen but it is predominantly the trapping that determines its distribution at temperatures of interest. The predominance of trapped hydrogen over lattice concentration prevails even in the case when hydrogen migrates under steady state conditions. Hence, the hydrostatic stress effect is less important than traps created by plastic straining as far as the creation of high total hydrogen concentration is concerned. The trapping site locations and the temperature determine the amounts and locations of high hydrogen concentrations. Consequently, ahead of a blunting crack tip, the total hydrogen concentration and plastic strain diminish with distance from the crack tip whereas the hydrostatic stress rises. This would seem to have significant consequences for fractures induced by the presence of hydrogen.

read more

Citations
More filters
Journal ArticleDOI

Local Deformation and Fracture Behavior of High-Strength Aluminum Alloys Under Hydrogen Influence

TL;DR: The local deformation and fracture behavior of high Zn Al-Zn-Mg(-Cu) alloys under hydrogen influence were investigated by in situ tests through synchrotron X-ray tomography as discussed by the authors.
Journal ArticleDOI

The effect of hydrostatic stress on the hydrogen induced mechanical degradation of dual phase steel: A combined experimental and numerical approach

TL;DR: In this article, the authors evaluated the influence of the local hydrostatic stress state and resulting local hydrogen concentration on the hydrogen embrittlement of a dual phase steel and found that the maximal concentration of hydrogen concentration occurs at the fracture surface in front of the notch tip.
Journal ArticleDOI

A modelling framework for coupled hydrogen diffusion and mechanical behaviour of engineering components

TL;DR: In this paper, a displacement-based finite element formulation with chemical potential as an additional degree of freedom, rather than the concentration, is employed to model hydrogen diffusion through a material and its accumulation within different microstructural features of the material.
Journal ArticleDOI

Evaluation of hydrogen-induced cracking in high-strength steel welded joints by acoustic emission technique

TL;DR: In this paper, the effect of hardness and plastic strain on the hydrogen diffusion coefficient was explicitly introduced into the governing equation in FEM and the criterion and indicator parameter for the crack initiation were derived as a function of maximum principal stress and locally accumulated hydrogen concentration.
Journal ArticleDOI

Analysis of hydrogen permeation tests considering two different modelling approaches for grain boundary trapping in iron

TL;DR: In this paper, the authors reproduce the electrochemical permeation test using FEM simulations considering two approaches: a continuum 1D model in which the trap density, binding energy and the input lattice concentrations are critical variables and a polycrystalline model where trapping at grain boundaries is simulated explicitly including a segregation factor and a diffusion coefficient different from that of the interior of the grain.
References
More filters
Book

The finite element method

TL;DR: In this article, the methodes are numeriques and the fonction de forme reference record created on 2005-11-18, modified on 2016-08-08.
Journal ArticleDOI

A Path Independent Integral and the Approximate Analysis of Strain Concentration by Notches and Cracks

TL;DR: In this paper, an integral is exhibited which has the same value for all paths surrounding a class of notches in two-dimensional deformation fields of linear or non-linear elastic materials.
Journal ArticleDOI

Effects of hydrogen on the properties of iron and steel

TL;DR: In this paper, the effects of hydrogen on the physical and mechanical properties of iron and steel are reviewed and a new mechanism for the cold work peak for hydrogen in iron is considered.
Journal ArticleDOI

The diffusion and trapping of hydrogen in steel

TL;DR: In this paper, the mobility of dissolved hydrogen in an iron lattice having a population of extraordinary, or trapping, sites for hydrogen is analyzed under the assumption of local equilibrium between the mobile and the trapped populations.
Book

Hydrogen in metals

Related Papers (5)