Journal ArticleDOI
Optimization of perturb and observe maximum power point tracking method
Reads0
Chats0
TLDR
In this article, the perturb and observe (PO) algorithm is used in photovoltaic (PV) systems to maximize the PV array output power by tracking continuously the maximum power point (MPP) which depends on panels temperature and on irradiance conditions.Abstract:
Maximum power point tracking (MPPT) techniques are used in photovoltaic (PV) systems to maximize the PV array output power by tracking continuously the maximum power point (MPP) which depends on panels temperature and on irradiance conditions. The issue of MPPT has been addressed in different ways in the literature but, especially for low-cost implementations, the perturb and observe (PO moreover, it is well known that the P&O algorithm can be confused during those time intervals characterized by rapidly changing atmospheric conditions. In this paper it is shown that, in order to limit the negative effects associated to the above drawbacks, the P&O MPPT parameters must be customized to the dynamic behavior of the specific converter adopted. A theoretical analysis allowing the optimal choice of such parameters is also carried out. Results of experimental measurements are in agreement with the predictions of theoretical analysis.read more
Citations
More filters
Proceedings ArticleDOI
A control method for grid-friendly photovoltaic systems with hybrid energy storage units
TL;DR: In this paper, the authors proposed a systematic control strategy to make the interconnected photovoltaic (PV) systems more grid-friendly, which consists of PV arrays, lead-acid battery, super-capacitor, DC/DC and DC/AC power converters.
Proceedings ArticleDOI
Hierarchical power management for DC microgrid in islanding mode and Solid State transformer enabled mode
Xunwei Yu,Xu She,Alex Q. Huang +2 more
TL;DR: A hierarchical power management scheme is proposed in this paper for a typical DC Microgrid, including the individual control for distributed renewable energy source (DRER) and distributed energy storage device (DESD).
Proceedings ArticleDOI
Energy extraction characteristic study of solar photovoltaic cells and modules
Shuhui Li,Huiying Zheng +1 more
TL;DR: In this paper, the I-V and P-V characteristics of solar PV cells and modules were investigated under uneven shading and dissimilar conditions, and different bypass diode arrangements could affect the maximum power extraction characteristics of a solar PV system.
Journal ArticleDOI
FPGA based new MPPT (maximum power point tracking) method for PV (photovoltaic) array system operating partially shaded conditions
TL;DR: In this paper, the authors proposed a novel MPPT method providing GMPP (global maximum power point) for PV arrays under any environmental conditions, which is based on sensing the current and voltage values of a capacitor connected to the output of the PV array during the charging time.
Journal ArticleDOI
Fast Hybrid MPPT Technique for Photovoltaic Applications: Numerical and Experimental Validation
TL;DR: In this paper, a hybrid maximum power point tracking (HMPPT) technique is presented and discussed, which is able to regulate not only the voltages of the PV modules of the array but also the input voltage of the inverter.
References
More filters
Journal ArticleDOI
Maximum photovoltaic power tracking: an algorithm for rapidly changing atmospheric conditions
TL;DR: In this article, the authors developed an incremental conductance (IncCond) algorithm to track the maximum power operating point (MPOP) of photovoltaic (PV) power generation systems.
Journal ArticleDOI
Development of a microcontroller-based, photovoltaic maximum power point tracking control system
TL;DR: In this paper, a buck-type DC/DC converter is used to maximize the photovoltaic array output power, irrespective of the temperature and irradiation conditions and of the load electrical characteristics.
Journal ArticleDOI
Comparative study of maximum power point tracking algorithms
D. P. Hohm,Michael Ropp +1 more
TL;DR: It is found that the P&O method, when properly optimized, can have MPPT efficiencies well in excess of 97%, and is highly competitive against other MPPT algorithms.
Journal ArticleDOI
Implementation of a DSP-controlled photovoltaic system with peak power tracking
TL;DR: A simple method of tracking the maximum power points (MPPs) and forcing the system to operate close to these points is presented, and the principle of energy conservation is used to derive the large- and small-signal model and transfer function.
Related Papers (5)
Comparison of Photovoltaic Array Maximum Power Point Tracking Techniques
Trishan Esram,Patrick L. Chapman +1 more