Journal ArticleDOI
The laser additive manufacture of Ti-6Al-4V
P. A. Kobryn,S. L. Semiatin +1 more
Reads0
Chats0
TLDR
In this paper, the relationship between LAM processing parameters and microstructure in as-deposited Ti-6Al-4V was investigated, and the results presented in this paper provide a first look at the relationships between the two parameters.Abstract:
Laser additive manufacturing (LAM) is a manufacturing technique with cost-reduction potential for titanium aerospace components. The mechanical properties of LAM Ti-6Al-4V have been investigated extensively, but little work on microstructure evolution has been performed to date. The results presented here provide a first look at the relationships between LAM processing parameters and microstructure in as-deposited Ti-6Al-4V.read more
Citations
More filters
Journal ArticleDOI
Influence of laser powder bed fusion process parameters on the properties of CuZn42 components: case study of the laser surface energy density
Journal ArticleDOI
Effect of ultrasonic intensity on microstructure and mechanical properties of steel alloy in direct energy deposition-Arc
TL;DR: In this paper , an ultrasound assisted DED-Arc system was developed by coupling ultrasonic energy with the electric arc deposition process, and the propagation and vibration distribution of ultrasound in the substrate were analyzed by numerical simulation method.
Posted Content
Comprehensive Quality Investigations of Wire-feed Additive Manufacturing by Learning of Experimental Data.
TL;DR: In this article, a comprehensive quality framework based on learning from experimental data that will enable improved quality control along with consistent micro-structural features of the part is investigated for quality improvement during manufacturing processes.
Journal ArticleDOI
Effects of high deposition rate during cold metal transfer additive manufacturing on microstructure and properties of Ti-6Al-4V
Journal ArticleDOI
Multiaxial fatigue of additively manufactured metallic components: A review of the failure mechanisms and fatigue life prediction methodologies
TL;DR: In this article , the authors present an overview of multiaxial fatigue in additively manufactured metallic components, providing insights into crack initiation sites and growth orientations and relating them to the fatigue failure mechanisms in these components.
References
More filters
Book
Fundamentals of Solidification
W. Kurz,D. J. Fisher +1 more
TL;DR: In this article, Atom Transfer at the Solid/Liquid Interface Morphological Instability of a Solid/ Liquid Interface Solidification Microstructure: Cells and Dendrites SolidificationMicrostructure, Eutectic and Peritectic Solute Redistribution Rapid Solidization Microstructures Summary Appendices Symbols Index
Book
Titanium: A Technical Guide
TL;DR: In this paper, the authors provide a summary of the most useful information required to understand titanium and its alloys and present a review of the significant features of the metallurgy and application of titanium and alloys.
Journal ArticleDOI
On the process of transition of the cubic-body-centered modification into the hexagonal-close-packed modification of zirconium
TL;DR: In this paper, the process of transition of the cubic-body-centred modification into the hexagonal-close-packed modification of zirconium can be described by means of a combination of shearing- and dilatation-processes parallel to definite crystallographic directions.
Journal ArticleDOI
The effect of laser power and traverse speed on microstructure, porosity, and build height in laser-deposited Ti-6Al-4V
Solid Freeform Fabrication Symposium (9th) Held at The University of Texas in Austin on August 11-13, 1998; 1998 Report and Proceedings
D. L. Bourell,J. J. Beaman +1 more
TL;DR: The Ninth Solid Freeform Fabrication Symposium (SFF) as mentioned in this paper was held at The University of Texas in Austin on August 11-13, 1998, attended by over 150 national and international researchers.