Showing papers in "Environmental Science and Pollution Research in 2016"

CO2 emissions, real output, energy consumption, trade, urbanization and financial development: testing the EKC hypothesis for the USA

Abstract: This study aims to investigate the relationship between carbon dioxide (CO2) emissions, energy consumption, real output (GDP), the square of real output (GDP2), trade openness, urbanization, and financial development in the USA for the period 1960–2010. The bounds testing for cointegration indicates that the analyzed variables are cointegrated. In the long run, energy consumption and urbanization increase environmental degradation while financial development has no effect on it, and trade leads to environmental improvements. In addition, this study does not support the validity of the environmental Kuznets curve (EKC) hypothesis for the USA because real output leads to environmental improvements while GDP2 increases the levels of gas emissions. The results from the Granger causality test show that there is bidirectional causality between CO2 and GDP, CO2 and energy consumption, CO2 and urbanization, GDP and urbanization, and GDP and trade openness while no causality is determined between CO2 and trade openness, and gas emissions and financial development. In addition, we have enough evidence to support one-way causality running from GDP to energy consumption, from financial development to output, and from urbanization to financial development. In light of the long-run estimates and the Granger causality analysis, the US government should take into account the importance of trade openness, urbanization, and financial development in controlling for the levels of GDP and pollution. Moreover, it should be noted that the development of efficient energy policies likely contributes to lower CO2 emissions without harming real output.

A review of toxicity and mechanisms of individual and mixtures of heavy metals in the environment.

Abstract: The rational for the study was to review the literature on the toxicity and corresponding mechanisms associated with lead (Pb), mercury (Hg), cadmium (Cd), and arsenic (As), individually and as mixtures, in the environment. Heavy metals are ubiquitous and generally persist in the environment, enabling them to biomagnify in the food chain. Living systems most often interact with a cocktail of heavy metals in the environment. Heavy metal exposure to biological systems may lead to oxidation stress which may induce DNA damage, protein modification, lipid peroxidation, and others. In this review, the major mechanism associated with toxicities of individual metals was the generation of reactive oxygen species (ROS). Additionally, toxicities were expressed through depletion of glutathione and bonding to sulfhydryl groups of proteins. Interestingly, a metal like Pb becomes toxic to organisms through the depletion of antioxidants while Cd indirectly generates ROS by its ability to replace iron and copper. ROS generated through exposure to arsenic were associated with many modes of action, and heavy metal mixtures were found to have varied effects on organisms. Many models based on concentration addition (CA) and independent action (IA) have been introduced to help predict toxicities and mechanisms associated with metal mixtures. An integrated model which combines CA and IA was further proposed for evaluating toxicities of non-interactive mixtures. In cases where there are molecular interactions, the toxicogenomic approach was used to predict toxicities. The high-throughput toxicogenomics combines studies in genetics, genome-scale expression, cell and tissue expression, metabolite profiling, and bioinformatics.

Cadmium stress in rice: toxic effects, tolerance mechanisms, and management: a critical review.

Abstract: Cadmium (Cd) is one of the main pollutants in paddy fields, and its accumulation in rice (Oryza sativa L.) and subsequent transfer to food chain is a global environmental issue. This paper reviews the toxic effects, tolerance mechanisms, and management of Cd in a rice paddy. Cadmium toxicity decreases seed germination, growth, mineral nutrients, photosynthesis, and grain yield. It also causes oxidative stress and genotoxicity in rice. Plant response to Cd toxicity varies with cultivars, growth condition, and duration of Cd exposure. Under Cd stress, stimulation of antioxidant defense system, osmoregulation, ion homeostasis, and over production of signaling molecules are important tolerance mechanisms in rice. Several strategies have been proposed for the management of Cd-contaminated paddy soils. One such approach is the exogenous application of hormones, osmolytes, and signaling molecules. Moreover, Cd uptake and toxicity in rice can be decreased by proper application of essential nutrients such as nitrogen, zinc, iron, and selenium in Cd-contaminated soils. In addition, several inorganic (liming and silicon) and organic (compost and biochar) amendments have been applied in the soils to reduce Cd stress in rice. Selection of low Cd-accumulating rice cultivars, crop rotation, water management, and exogenous application of microbes could be a reasonable approach to alleviate Cd toxicity in rice. To draw a sound conclusion, long-term field trials are still required, including risks and benefit analysis for various management strategies.

Microbial siderophores and their potential applications: a review

Abstract: Siderophores are small organic molecules produced by microorganisms under iron-limiting conditions which enhance the uptake of iron to the microorganisms. In environment, the ferric form of iron is insoluble and inaccessible at physiological pH (7.35-7.40). Under this condition, microorganisms synthesize siderophores which have high affinity for ferric iron. These ferric iron-siderophore complexes are then transported to cytosol. In cytosol, the ferric iron gets reduced into ferrous iron and becomes accessible to microorganism. In recent times, siderophores have drawn much attention due to its potential roles in different fields. Siderophores have application in microbial ecology to enhance the growth of several unculturable microorganisms and can alter the microbial communities. In the field of agriculture, different types of siderophores promote the growth of several plant species and increase their yield by enhancing the Fe uptake to plants. Siderophores acts as a potential biocontrol agent against harmful phyto-pathogens and holds the ability to substitute hazardous pesticides. Heavy-metal-contaminated samples can be detoxified by applying siderophores, which explicate its role in bioremediation. Siderophores can detect the iron content in different environments, exhibiting its role as a biosensor. In the medical field, siderophore uses the "Trojan horse strategy" to form complexes with antibiotics and helps in the selective delivery of antibiotics to the antibiotic-resistant bacteria. Certain iron overload diseases for example sickle cell anemia can be treated with the help of siderophores. Other medical applications of siderophores include antimalarial activity, removal of transuranic elements from the body, and anticancer activity. The aim of this review is to discuss the important roles and applications of siderophores in different sectors including ecology, agriculture, bioremediation, biosensor, and medicine.

Effect of biochar on the extractability of heavy metals (Cd, Cu, Pb, and Zn) and enzyme activity in soil.

Abstract: Biochar is a carbon-rich solid material derived from the pyrolysis of agricultural and forest residual biomass. Previous studies have shown that biochar is suitable as an adsorbent for soil contaminants such as heavy metals and consequently re- duces their bioavailability. However, the long-term effect of dif- ferent biochars on metal extractability or soil health has not been assessed. Therefore, a 1-year incubation experiment was carried out to investigate the effect of biochar produced from bamboo and rice straw (at temperatures ≥500 °C) on the heavy metal (cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn)) extract- ability and enzyme activity (urease, catalase, and acid phospha- tase) in a contaminated sandy loam paddy soil. Three rates (0, 1, and 5 %) and two mesh sizes (<0.25 and <1 mm) of biochar applications were investigated. After incubation, the physico- chemical properties, extractable heavy metals, available phos- phorus, and enzyme activity of soil samples were analyzed. The results demonstrated that rice straw biochar significantly (P<0.05) increased the pH, electrical conductivity, and cation exchange capacity of the soil, especially at the 5 % application rate. Both bamboo and rice straw biochar significantly (P<0.05) decreased the concentration of CaCl2-extractable heavy metals as biochar application rate increased. The heavy metal extractability was significantly (P<0.01) correlated with pH, water-soluble organic carbon, and available phosphorus in soil. The 5 % appli- cation rate of fine rice straw bioc har resulted in the greatest re- ductions of extractable Cu and Zn, 97.3 and 62.2 %, respectively. Both bamboo and rice straw biochar were more effective at de- creasingextractableCu andPb thanremoving extractable Cdand Zn from the soil. Urease activity increased by 143 and 107 % after the addition of 5 % coarse and fine rice straw biochars, respectively. Both bamboo and rice straw biochars significantly (P<0.05) increased catalase activity but had no significant im- pact on acid phosphatase activity. In conclusion, the rice straw biochar had greater potential as an amendment for reducing the bioavailability of heavy metals in soil than that of the bamboo biochar. The impact of biochar treatment on heavy metal extract- ability and enzyme activity varied with the biochar type, appli- cation rate, and particle size.

Natural deep eutectic solvent mediated pretreatment of rice straw: bioanalytical characterization of lignin extract and enzymatic hydrolysis of pretreated biomass residue

Abstract: The present investigation demonstrated pretreatment of lignocellulosic biomass rice straw using natural deep eutectic solvents (NADESs), and separation of high-quality lignin and holocellulose in a single step. Qualitative analysis of the NADES extract showed that the extracted lignin was of high purity (>90 %), and quantitative analysis showed that nearly 60 ± 5 % (w/w) of total lignin was separated from the lignocellulosic biomass. Addition of 5.0 % (v/v) water during pretreatment significantly enhanced the total lignin extraction, and nearly 22 ± 3 % more lignin was released from the residual biomass into the NADES extract. X-ray diffraction studies of the untreated and pretreated rice straw biomass showed that the crystallinity index ratio was marginally decreased from 46.4 to 44.3 %, indicating subtle structural alterations in the crystalline and amorphous regions of the cellulosic fractions. Thermogravimetric analysis of the pretreated biomass residue revealed a slightly higher T dcp (295 °C) compared to the T dcp (285 °C) of untreated biomass. Among the tested NADES reagents, lactic acid/choline chloride at molar ratio of 5:1 extracted maximum lignin of 68 ± 4 mg g−1 from the rice straw biomass, and subsequent enzymatic hydrolysis of the residual holocellulose enriched biomass showed maximum reducing sugars of 333 ± 11 mg g−1 with a saccharification efficiency of 36.0 ± 3.2 % in 24 h at 10 % solids loading.

Investigating the environmental Kuznets curve hypothesis: the role of tourism and ecological footprint

Abstract: The main objective of this study is to examine the environmental Kuznets curve (EKC) hypothesis by utilizing the ecological footprint as an environment indicator and GDP from tourism as the economic indicator. To achieve this goal, an environmental degradation model is established during the period of 1988–2008 for 144 countries. The results from the time series generalized method of moments (GMM) and the system panel GMM revealed that the number of countries that have a negative relationship between the ecological footprint and its determinants (GDP growth from tourism, energy consumption, trade openness, and urbanization) is more existent in the upper middle- and high-income countries. Moreover, the EKC hypothesis is more present in the upper middle- and high-income countries than the other income countries. From the outcome of this research, a number of policy recommendations were provided for the investigated countries.

Mechanisms of biochar-mediated alleviation of toxicity of trace elements in plants: a critical review.

Abstract: Trace elements (TEs) contamination is one of the main abiotic stresses which limit plant growth and deteriorate the food quality by their entry into food chain. In recent, biochar (BC) soil amendment has been widely reported for the reduction of TE(s) uptake and toxicity in plants. This review summarizes the role of BC in enhancing TE(s) tolerance in plants. Under TE(s) stress, BC application increased plant growth, biomass, photosynthetic pigments, grain yield, and quality. The key mechanisms evoked are immobilization of TE(s) in the soil, increase in soil pH, alteration of TE(s) redox state in the soil, and improvement in soil physical and biological properties under TE(s) stress. However, these mechanisms vary with plant species, genotypes, growth conditions, duration of stress imposed, BC type, and preparation methods. This review highlights the potential for improving plant resistance to TE(s) stress by BC application and provides a theoretical basis for application of BC in TE(s) contaminated soils worldwide.

Crop protection and environmental health: legacy management and new concepts

Abstract: This the Editorial of the special issue of the journal "Environmental Science and Pollution Research" dedicated to the annual congress of the French Group on Pesticide (GFP with its initials in French) that was held in Martinique in May 2014.

Sorption of pharmaceuticals and personal care products to polyethylene debris

Abstract: Presence of plastic debris in marine and freshwater ecosystems is increasingly reported. Previous research suggested plastic debris had a strong affiliation for many pollutants, such as polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs), and heavy metals. In this study, the sorption behavior of pharmaceuticals and personal care products (PPCPs), including carbamazepine (CBZ), 4-methylbenzylidene camphor (4MBC), triclosan (TCS), and 17α-ethinyl estradiol (EE2), to polyethylene (PE) debris (250 to 280 μm) was investigated. The estimated linear sorption coefficients (K d) are 191.4, 311.5, 5140, and 53,225 L/kg for CBZ, EE2, TCS, and 4MBC, and are related to their hydrophobicities. Increase of salinity from 0.05 to 3.5 % did not affect the sorption of 4MBC, CBZ, and EE2 but enhanced the sorption of TCS, likely due to the salting-out effect. Increase of dissolved organic matter (DOM) content using Aldrich humic acid (HA) as a proxy reduced the sorption of 4MBC, EE2, and TCS, all of which show a relatively strong affiliation to HA. Results from this work suggest that microplastics may play an important role in the fate and transport of PPCPs, especially for those hydrophobic ones.

A review of the characterization and revegetation of bauxite residues (Red mud)

Abstract: Bauxite residue (Red mud) is produced in alumina plants by the Bayer process in which Al-containing minerals are dissolved in hot NaOH The global residue inventory reached an estimated 35 billion tons in 2014, increasing by approximately 120 million tons per annum The appropriate management of bauxite residue is becoming a global environmental concern following increased awareness of the need for environmental protection Establishment of a vegetation cover is the most promising way forward for the management of bauxite residue, although its physical and chemical properties can limit plant growth due to high alkalinity and salinity, low hydraulic conductivity, trace element toxicity (Al and Fe), and deficiencies in organic matter and nutrition concentrations This paper discusses the various revegetation and rehabilitation strategies Studies of the rehabilitation of bauxite residues have mainly focused on two approaches, amelioration of the surface layer and screening of tolerant plants and soil microorganisms Amendment with gypsum can reduce the high alkalinity and salinity, promote soil aggregation, and increase the hydraulic conductivity of bauxite residues Organic matter can provide a source of plant nutrients, form stable complexes with metal cations, promote hydraulic conductivity, stabilize soil structure, and provide an energy source for soil organisms Tolerant plants and microorganisms such as halophytes and alkaliphilic microbes show the greatest potential to ameliorate bauxite residues However, during restoration or as a result of natural vegetation establishment, soil formation becomes a critical issue and an improved understanding of the various pedogenic processes are required, and future direction should focus on this area

Glyphosate: environmental contamination, toxicity and potential risks to human health via food contamination.

Abstract: Glyphosate has been the most widely used herbicide during the past three decades. The US Environmental Protection Agency (EPA) classifies glyphosate as ‘practically non-toxic and not an irritant’ under the acute toxicity classification system. This classification is based primarily on toxicity data and due to its unique mode of action via a biochemical pathway that only exists in a small number of organisms that utilise the shikimic acid pathway to produce amino acids, most of which are green plants. This classification is supported by the majority of scientific literature on the toxic effects of glyphosate. However, in 2005, the Food and Agriculture Organisation (FAO) reported that glyphosate and its major metabolite, aminomethylphosphonic acid (AMPA), are of potential toxicological concern, mainly as a result of accumulation of residues in the food chain. The FAO further states that the dietary risk of glyphosate and AMPA is unlikely if the maximum daily intake of 1 mg kg−1 body weight (bw) is not exceeded. Research has now established that glyphosate can persist in the environment, and therefore, assessments of the health risks associated with glyphosate are more complicated than suggested by acute toxicity data that relate primarily to accidental high-rate exposure. We have used recent literature to assess the possible risks associated with the presence of glyphosate residues in food and the environment.

Emissions of microplastic fibers from microfiber fleece during domestic washing

Abstract: Microplastics are found in marine and freshwater environments; however, their specific sources are not yet well understood. Understanding sources will be of key importance in efforts to reduce emissions into the environment. We examined the emissions of microfibers from domestic washing of a new microfiber polyester fleece textile. Analyzing released fibers collected with a 200 μm filter during 10 mild, successive washing cycles showed that emission initially decreased and then stabilized at approx. 0.0012 wt%. This value is our estimation for the long-term release of fibers during each washing. Use of detergent and softener did not significantly influence emission. Release of fibers during tumble drying was approx. 3.5 times higher than during washing.

Environmental application of nanotechnology: air, soil, and water

Abstract: Global deterioration of water, soil, and atmosphere by the release of toxic chemicals from the ongoing anthropogenic activities is becoming a serious problem throughout the world. This poses numerous issues relevant to ecosystem and human health that intensify the application challenges of conventional treatment technologies. Therefore, this review sheds the light on the recent progresses in nanotechnology and its vital role to encompass the imperative demand to monitor and treat the emerging hazardous wastes with lower cost, less energy, as well as higher efficiency. Essentially, the key aspects of this account are to briefly outline the advantages of nanotechnology over conventional treatment technologies and to relevantly highlight the treatment applications of some nanomaterials (e.g., carbon-based nanoparticles, antibacterial nanoparticles, and metal oxide nanoparticles) in the following environments: (1) air (treatment of greenhouse gases, volatile organic compounds, and bioaerosols via adsorption, photocatalytic degradation, thermal decomposition, and air filtration processes), (2) soil (application of nanomaterials as amendment agents for phytoremediation processes and utilization of stabilizers to enhance their performance), and (3) water (removal of organic pollutants, heavy metals, pathogens through adsorption, membrane processes, photocatalysis, and disinfection processes).

Deep learning architecture for air quality predictions

Abstract: With the rapid development of urbanization and industrialization, many developing countries are suffering from heavy air pollution. Governments and citizens have expressed increasing concern regarding air pollution because it affects human health and sustainable development worldwide. Current air quality prediction methods mainly use shallow models; however, these methods produce unsatisfactory results, which inspired us to investigate methods of predicting air quality based on deep architecture models. In this paper, a novel spatiotemporal deep learning (STDL)-based air quality prediction method that inherently considers spatial and temporal correlations is proposed. A stacked autoencoder (SAE) model is used to extract inherent air quality features, and it is trained in a greedy layer-wise manner. Compared with traditional time series prediction models, our model can predict the air quality of all stations simultaneously and shows the temporal stability in all seasons. Moreover, a comparison with the spatiotemporal artificial neural network (STANN), auto regression moving average (ARMA), and support vector regression (SVR) models demonstrates that the proposed method of performing air quality predictions has a superior performance.

Silicon alleviates Cd stress of wheat seedlings (Triticum turgidum L. cv. Claudio) grown in hydroponics

Abstract: We investigated the potential role of silicon in improving tolerance and decreasing cadmium (Cd) toxicity in durum wheat (Triticum turgidum L. durum) either through a reduced Cd uptake or exclusion/sequestration in non-metabolic tissues. For this, plants were grown in hydroponic conditions for 10 days either in presence or absence of 1 mM Si and for 11 additional days in various Cd concentrations (0, 0.5, 5.0 and 50 mu M). After harvesting, morphological and physiological parameters as well as elemental concentrations were recorded. Cadmium caused reduction in growth parameters, photosynthetic pigments and mineral nutrient concentrations both in shoots and roots. Shoot and root contents of malate, citrate and aconitate increased, while contents of phosphate, nitrate and sulphate decreased with increasing Cd concentrations in plants. Addition of Si to the nutrient solution mitigated these adverse effects: Cd concentration in shoots decreased while concentration of Cd adsorbed at the root cell apoplasmic level increased together with Zn uptake by roots. Overall, total Cd uptake decreased in presence of Si. There was no co-localisation of Cd and Si either at the shoot or at the root levels. No Cd was detected in leaf phytoliths. In roots, Cd was mainly detected in the cortical parenchyma and Si at the endodermis level, while analysis of the outer thin root surface of the plants grown in the 50 mu M Cd + 1 mM Si treatment highlighted non-homogeneous Cd and Si enrichments. These data strongly suggest the existence of a root localised protection mechanism consisting in armoring the root surface by Si- and Cd-bearing compounds and in limiting root-shoot translocation.

Catalase and ascorbate peroxidase—representative H2O2-detoxifying heme enzymes in plants

Abstract: Plants have to counteract unavoidable stress-caused anomalies such as oxidative stress to sustain their lives and serve heterotrophic organisms including humans. Among major enzymatic antioxidants, catalase (CAT; EC 1.11.1.6) and ascorbate peroxidase (APX; EC 1.11.1.11) are representative heme enzymes meant for metabolizing stress-provoked reactive oxygen species (ROS; such as H2O2) and controlling their potential impacts on cellular metabolism and functions. CAT mainly occurs in peroxisomes and catalyzes the dismutation reaction without requiring any reductant; whereas, APX has a higher affinity for H2O2 and utilizes ascorbate (AsA) as specific electron donor for the reduction of H2O2 into H2O in organelles including chloroplasts, cytosol, mitochondria, and peroxisomes. Literature is extensive on the glutathione-associated H2O2-metabolizing systems in plants. However, discussion is meager or scattered in the literature available on the biochemical and genomic characterization as well as techniques for the assays of CAT and APX and their modulation in plants under abiotic stresses. This paper aims (a) to introduce oxidative stress-causative factors and highlights their relationship with abiotic stresses in plants; (b) to overview structure, occurrence, and significance of CAT and APX in plants;

Occurrence of PPCPs in the marine environment: a review

Abstract: Little research has been conducted on the occurrence of pharmaceuticals and personal care products (PPCPs) in the marine environment despite being increasingly impacted by these contaminants. This article reviews data on the occurrence of PPCPs in seawater, sediment, and organisms in the marine environment. Data pertaining to 196 pharmaceuticals and 37 personal care products reported from more than 50 marine sites are analyzed while taking sampling strategies and analytical methods into account. Particular attention is focused on the most frequently detected substances at highest concentrations. A snapshot of the most impacted marine sites is provided by comparing the highest concentrations reported for quantified substances. The present review reveals that: (i) PPCPs are widespread in seawater, particularly at sites impacted by anthropogenic activities, and (ii) the most frequently investigated and detected molecules in seawater and sediments are antibiotics, such as erythromycin. Moreover, this review points out other PPCPs of concern, such as ultraviolet filters, and underlines the scarcity of data on those substances despite recent evidence on their occurrence in marine organisms. The exposure of marine organisms in regard to these insufficient data is discussed.

Photocatalytic degradation of methylene blue dye by zinc oxide nanoparticles obtained from precipitation and sol-gel methods

Abstract: Zinc oxide (ZnO) nanoparticles were synthesized by precipitation and sol-gel methods. The aim of this study was to understand how different synthetic methods can affect the photocatalytic activity of ZnO nanoparticles. As-synthesized ZnO nanoparticles were characterized by X-ray diffraction (XRD) and UV-Visible spectroscopic techniques. XRD patterns of ZnO powders synthesized by precipitation and sol-gel methods revealed their hexagonal wurtzite structure with crystallite sizes of 30 and 28 nm, respectively. Their photocatalytic activities were evaluated by photocatalytic degradation of methylene blue, a common water pollutant, under UV radiation. The effects of operational parameters such as photocatalyst load and initial concentration of the dye on photocatalytic degradation of methylene blue were investigated. While the degradation of dye decreased over the studied dye concentration range of 20 to 100 mg/L, an optimum photocatalyst load of 250 mg/L was needed to achieve dye degradation as high as 81 and 92.5 % for ZnO prepared by precipitation and sol-gel methods, respectively. Assuming pseudo first-order reaction kinetics, this corresponded to rate constants of 8.4 × 10−3 and 12.4 × 10−3 min−1, respectively. Hence, sol-gel method is preferred over precipitation method in order to achieve higher photocatalytic activity of ZnO nanostructures. Photocatalytic activity is further augmented by better choice of capping ligand for colloidal stabilization, starch being more effective than polyethylene glycol (PEG).

Toxicities of 48 pharmaceuticals and their freshwater and marine environmental assessment in northwestern France

Abstract: A risk assessment for freshwater and marine ecosystems is presented for 48 pharmaceutical compounds, belonging to 16 therapeutic classes, and prescribed in northwestern France. Ecotoxicity data were obtained on two freshwater organisms, i.e., crustacean Daphnia magna and the green algae Pseudokirchneriella subcapitata, and on two marine organisms, i.e., the crustacean Artemia salina and the diatom Skeletonema marinoi. Measured environmental concentrations (MEC), in the Orne River and sea off Merville-Franceville in the Basse-Normandie region, were compared to the predicted environmental concentrations (PEC). Predicted no-effect concentrations (PNEC) were derived from acute data for each compound. Then, a risk assessment for each compound and the mixture was performed by calculating risk quotients (RQ as PEC or MEC/PNEC ratio). Results showed that no immediate acute toxicities were expected even if some compounds displayed strong toxicities at very low concentrations. Antibiotics, antidepressants, and antifungals would deserve attention because of their high or median ecological risk suspected on marine and freshwater ecosystems. Marine ecosystems would be more sensitive to pharmaceutical residues.

Do foreign direct investment and renewable energy consumption affect the CO 2 emissions? New evidence from a panel ARDL approach to Kyoto Annex countries

Abstract: This study examines the impact of foreign direct investment (FDI) and the potential of renewable energy consumption on carbon dioxide (CO2) emissions in 21 Kyoto countries using an unbalanced panel data. For this purpose, Environmental Kuznets Curve (EKC) hypothesis was tested using panel cointegration analysis. Panel causality tests show that there are significant long-run causalities from the variables to carbon emissions, renewable energy consumption, fossil fuel energy consumption and inflow foreign direct investments. The results of our model support the pollution haloes hypothesis which states that FDI brings in clean technology and improves the environmental standards. However, an inverted U-shaped relationship (EKC) was not supported by the estimated model for the 21 Kyoto countries. This means that economic growth cannot ensure environmental protection itself or environmental goals cannot await economic growth. Another important finding is that renewable energy consumption decreases carbon emissions. Based on the empirical results, some important policy implications emerge. Kyoto countries should stimulate the FDI inflows and usage of renewable energy consumption to mitigate the air pollution and meet the emission targets. This paper provides new insights into environment and energy policies through FDI inclusion.

Biochar enhances the cadmium tolerance in spinach (Spinacia oleracea) through modification of Cd uptake and physiological and biochemical attributes

Abstract: Cadmium (Cd) has no known role in plant biology and is toxic to plants and animals. The Cd mainly accumulated in agricultural soils through anthropogenic activities, such as sewage water irrigation and phosphorus fertilization. Biochar (BC) has been proposed as an amendment to reduce metal toxicity in plants. The objective of this study was to evaluate the role of BC (cotton stick at a rate of 0, 3, and 5 %) on Cd uptake and the photosynthetic, physiological, and biochemical responses of spinach (Spinacia oleracea) grown in Cd-spiked soil (0, 25, 50, 75, and 100 mg Cd kg-1 soil). The results showed that Cd toxicity decreased growth, photosynthetic pigments, gas exchange characteristics, and amino acid and protein contents in 52-day-old spinach seedlings. The Cd treatments increased the concentrations of Cd, sugar, ascorbic acid, and malondialdehyde (MDA) in plants. The application of BC ameliorated the harmful effects of Cd in spinach plants. Under Cd stress, BC application increased the growth, photosynthesis, and protein contents and decreased Cd concentrations and MDA contents in plants. The maximum BC-mediated increase in dry biomass was about 25 % with 5 % BC application in control plants. It is concluded that BC could ameliorate Cd toxic effects in spinach through changing the physiological and biochemical attributes under Cd stress.

The impact of PM2.5 on asthma emergency department visits: a systematic review and meta-analysis.

Abstract: Although the relationship between asthma and exposure to fine particulate matter (PM2.5) has been frequently measured, reported conclusions have not been consistent. As emergency department (ED) visits are an effective way to estimate health outcomes for people with asthma and short-term exposure to PM2.5, this review systematically searched five databases without language or geographical restrictions from inception to January 13, 2015 to study the impact of PM2.5 on asthma ED visits. A random-effects model was used to calculate the pooled risk ratio (RR) and 95% confidence intervals (CI). With respect to short-term effects, asthma ED visits increased at higher PM2.5 concentrations (RR 1.5% per 10 μg/m(3); 95% CI 1.2-1.7%), and children were more susceptible (3.6% per 10 μg/m(3); 95% CI 1.8, 5.3%) than adults (1.7, 95% CI 0.7%, 2.8%) to increased PM2.5; the ED visits increased during the warm season by 3.7% (95% CI 0.5, 6.9%) per 10 μg/m(3) increase in PM2.5, which was higher than the corresponding increase during the cold season (2.6, 95% CI 0.7-4.6%). This demonstrates that ambient PM2.5 has an adverse impact on asthma ED visits after short-term exposure and that children are a high-risk population when PM2.5 concentrations are high, particularly in warm seasons, during which measures should be taken to prevent PM2.5.

Economic growth and energy regulation in the environmental Kuznets curve

Abstract: This study establishes the existence of a pattern of behavior, between economic growth and environmental degradation, consistent with the environmental Kuznets curve (EKC) hypothesis for 17 Organization for Economic Cooperation and Development (OECD) countries between 1990 and 2012. Based on this EKC pattern, it shows that energy regulation measures help reduce per capita greenhouse gas (GHG) emissions. To validate this hypothesis, we also add the explanatory variables: renewable energy promotion, energy innovation processes, and the suppression effect of income level on the contribution of renewable energy sources to total energy consumption. It aims to be a tool for decision-making regarding energy policy. This paper provides a two-stage econometric analysis of instrumental variables with the aim of correcting the existence of endogeneity in the variable GDP per capita, verifying that the instrumental variables used in this research are appropriate for our aim. To this end, it first makes a methodological contribution before incorporating additional variables associated with environmental air pollution into the EKC hypothesis and showing how they positively affect the explanation of the correction in the GHG emission levels. This study concludes that air pollution will not disappear on its own as economic growth increases. Therefore, it is necessary to promote energy regulation measures to reduce environmental pollution.

Removal of mercury by adsorption: a review

Abstract: Due to natural and production activities, mercury contamination has become one of the major environmental problems over the world. Mercury contamination is a serious threat to human health. Among the existing technologies available for mercury pollution control, the adsorption process can get excellent separation effects and has been further studied. This review is attempted to cover a wide range of adsorbents that were developed for the removal of mercury from the year 2011. Various adsorbents, including the latest adsorbents, are presented along with highlighting and discussing the key advancements on their preparation, modification technologies, and strategies. By comparing their adsorption capacities, it is evident from the literature survey that some adsorbents have shown excellent potential for the removal of mercury. However, there is still a need to develop novel, efficient adsorbents with low cost, high stability, and easy production and manufacture for practical utility.

Surfactants in aquatic and terrestrial environment: occurrence, behavior, and treatment processes

Abstract: Surfactants belong to a group of chemicals that are well known for their cleaning properties. Their excessive use as ingredients in care products (e.g., shampoos, body wash) and in household cleaning products (e.g., dishwashing detergents, laundry detergents, hard-surface cleaners) has led to the discharge of highly contaminated wastewaters in aquatic and terrestrial environment. Once reached in the different environmental compartments (rivers, lakes, soils, and sediments), surfactants can undergo aerobic or anaerobic degradation. The most studied surfactants so far are linear alkylbenzene sulfonate (LAS), quaternary ammonium compounds (QACs), alkylphenol ethoxylate (APEOs), and alcohol ethoxylate (AEOs). Concentrations of surfactants in wastewaters can range between few micrograms to hundreds of milligrams in some cases, while it reaches several grams in sludge used for soil amendments in agricultural areas. Above the legislation standards, surfactants can be toxic to aquatic and terrestrial organisms which make treatment processes necessary before their discharge into the environment. Given this fact, biological and chemical processes should be considered for better surfactants removal. In this review, we investigate several issues with regard to: (1) the toxicity of surfactants in the environment, (2) their behavior in different ecological systems, (3) and the different treatment processes used in wastewater treatment plants in order to reduce the effects of surfactants on living organisms.

Do antibiotics have environmental side-effects? Impact of synthetic antibiotics on biogeochemical processes.

Abstract: Antibiotic use in the early 1900 vastly improved human health but at the same time started an arms race of antibiotic resistance. The widespread use of antibiotics has resulted in ubiquitous trace concentrations of many antibiotics in most environments. Little is known about the impact of these antibiotics on microbial processes or “non-target” organisms. This mini-review summarizes our knowledge of the effect of synthetically produced antibiotics on microorganisms involved in biogeochemical cycling. We found only 31 articles that dealt with the effects of antibiotics on such processes in soil, sediment, or freshwater. We compare the processes, antibiotics, concentration range, source, environment, and experimental approach of these studies. Examining the effects of antibiotics on biogeochemical processes should involve environmentally relevant concentrations (instead of therapeutic), chronic exposure (versus acute), and monitoring of the administered antibiotics. Furthermore, the lack of standardized tests hinders generalizations regarding the effects of antibiotics on biogeochemical processes. We investigated the effects of antibiotics on biogeochemical N cycling, specifically nitrification, denitrification, and anammox. We found that environmentally relevant concentrations of fluoroquinolones and sulfonamides could partially inhibit denitrification. So far, the only documented effects of antibiotic inhibitions were at therapeutic doses on anammox activities. The most studied and inhibited was nitrification (25–100 %) mainly at therapeutic doses and rarely environmentally relevant. We recommend that firm conclusions regarding inhibition of antibiotics at environmentally relevant concentrations remain difficult due to the lack of studies testing low concentrations at chronic exposure. There is thus a need to test the effects of these environmental concentrations on biogeochemical processes to further establish the possible effects on ecosystem functioning.

Economics of carbon dioxide capture and utilization-a supply and demand perspective.

Abstract: Lately, the technical research on carbon dioxide capture and utilization (CCU) has achieved important breakthroughs. While single CO2-based innovations are entering the markets, the possible economic effects of a large-scale CO2 utilization still remain unclear to policy makers and the public. Hence, this paper reviews the literature on CCU and provides insights on the motivations and potential of making use of recovered CO2 emissions as a commodity in the industrial production of materials and fuels. By analyzing data on current global CO2 supply from industrial sources, best practice benchmark capture costs and the demand potential of CO2 utilization and storage scenarios with comparative statics, conclusions can be drawn on the role of different CO2 sources. For near-term scenarios the demand for the commodity CO2 can be covered from industrial processes, that emit CO2 at a high purity and low benchmark capture cost of approximately 33 €/t. In the long-term, with synthetic fuel production and large-scale CO2 utilization, CO2 is likely to be available from a variety of processes at benchmark costs of approx. 65 €/t. Even if fossil-fired power generation is phased out, the CO2 emissions of current industrial processes would suffice for ambitious CCU demand scenarios. At current economic conditions, the business case for CO2 utilization is technology specific and depends on whether efficiency gains or substitution of volatile priced raw materials can be achieved. Overall, it is argued that CCU should be advanced complementary to mitigation technologies and can unfold its potential in creating local circular economy solutions.

Application of gas diffusion biocathode in microbial electrosynthesis from carbon dioxide

Abstract: Microbial catalysis of carbon dioxide (CO2) reduction to multi-carbon compounds at the cathode is a highly attractive application of microbial electrosynthesis (MES). The microbes reduce CO2 by either taking the electrons or reducing the equivalents produced at the cathode. While using gaseous CO2 as the carbon source, the biological reduction process depends on the dissolution and mass transfer of CO2 in the electrolyte. In order to deal with this issue, a gas diffusion electrode (GDE) was investigated by feeding CO2 through the GDE into the MES reactor for its reduction at the biocathode. A combination of the catalyst layer (porous activated carbon and Teflon binder) and the hydrophobic gas diffusion layer (GDL) creates a three-phase interface at the electrode. So, CO2 and reducing equivalents will be available to the biocatalyst on the cathode surface. An enriched inoculum consisting of acetogenic bacteria, prepared from an anaerobic sludge, was used as a biocatalyst. The cathode potential was maintained at -1.1 V vs Ag/AgCl to facilitate direct and/or hydrogen-mediated CO2 reduction. Bioelectrochemical CO2 reduction mainly produced acetate but also extended the products to ethanol and butyrate. Average acetate production rates of 32 and 61 mg/L/day, respectively, with 20 and 80 % CO2 gas mixture feed were achieved with 10 cm2 of GDE. The maximum acetate production rate remained 238 mg/L/day for 20 % CO2 gas mixture. In conclusion, a gas diffusion biocathode supported bioelectrochemical CO2 reduction with enhanced mass transfer rate at continuous supply of gaseous CO2. Graphical abstract ᅟ.

Microplastics affect assimilation efficiency in the freshwater amphipod Gammarus fossarum

Abstract: An important issue in assessing microplastics is whether this newly emerging type of pollution affects freshwater invertebrates. This study was designed to examine the interactions between the amphipod Gammarus fossarum and two types of microplastics. To determine the ingestion and egestion of polyamide (PA) fibres (500 × 20 μm), amphipods were exposed to four concentrations (100, 540, 2680, 13,380 PA fibres cm−2 base area of glass beakers) and four exposure times (0.5, 2, 8, 32 h) as well as four post-exposure times (1, 2, 4, 16 h). We demonstrate a positive correlation between concentration and ingestion of PA fibres. Fibres were found in the gut after 0.5 h of exposure. Egestion was rapid and the digestive tract was empty 16 h after exposure ended. To investigate whether polystyrene (PS) beads (1.6 μm) can be taken up in the epithelial cells of the gut and the midgut glands, four concentrations (500, 2500, 12,500, 60,000 PS beads mL−1) were tested. Cryosections exhibited fluorescent PS beads only within the gut lumen. In a 28-day feeding experiment with both, fibres and beads, we studied the amphipod’s feeding rate, assimilation efficiency and wet weight change. The exposure to PA fibres (2680 PA fibres cm−2 base area of glass beakers) significantly reduced the assimilation efficiency of the animals. While both tested polymer types are ingested and egested, PA fibres can impair the health and ecological functions of freshwater amphipods under continuous exposure.