Efficient luminescent solar cells based on tailored mixed-cation perovskites
Dongqin Bi,Wolfgang Tress,M. Ibrahim Dar,Peng Gao,Jingshan Luo,Clementine Renevier,Kurt Schenk,Antonio Abate,Fabrizio Giordano,Juan-Pablo Correa Baena,Jean-David Decoppet,Shaik M. Zakeeruddin,Mohammad Khaja Nazeeruddin,Michael Grätzel,Anders Hagfeldt +14 more
TLDR
A new metal halide perovskite photovoltaic cell that exhibits both very high solar-to-electric power-conversion efficiency and intense electroluminescence is reported on.Abstract:
We report on a new metal halide perovskite photovoltaic cell that exhibits both very high solar-to-electric power-conversion efficiency and intense electroluminescence. We produce the perovskite films in a single step from a solution containing a mixture of FAI, PbI2, MABr, and PbBr2 (where FA stands for formamidinium cations and MA stands for methylammonium cations). Using mesoporous TiO2 and Spiro-OMeTAD as electron- and hole-specific contacts, respectively, we fabricate perovskite solar cells that achieve a maximum power-conversion efficiency of 20.8% for a PbI2/FAI molar ratio of 1.05 in the precursor solution. Rietveld analysis of x-ray diffraction data reveals that the excess PbI2 content incorporated into such a film is about 3 weight percent. Time-resolved photoluminescence decay measurements show that the small excess of PbI2 suppresses nonradiative charge carrier recombination. This in turn augments the external electroluminescence quantum efficiency to values of about 0.5%, a record for perovskite photovoltaics approaching that of the best silicon solar cells. Correspondingly, the open-circuit photovoltage reaches 1.18 V under AM 1.5 sunlight.read more
Citations
More filters
Journal ArticleDOI
Passivation of the grain boundaries of CH 3 NH 3 PbI 3 using carbon quantum dots for highly efficient perovskite solar cells with excellent environmental stability.
Qiang Guo,Fanglong Yuan,Bing Zhang,Shijie Zhou,Jin Zhang,Yiming Bai,Louzhen Fan,Tasawar Hayat,Ahmed Alsaedi,Zhan'ao Tan,Zhan'ao Tan +10 more
TL;DR: This work for the first time introduced carbon quantum dots (CQDs) as an additive for the stabilization of MAPbI3via passivation of the grain boundaries of the perovskite, inducing a lower trap-state density and better optoelectronic properties.
Journal ArticleDOI
Doping and alloying for improved perovskite solar cells
Yuanyuan Zhou,Zhongmin Zhou,Min Chen,Yingxia Zong,Yingxia Zong,Jinsong Huang,Shuping Pang,Nitin P. Padture +7 more
TL;DR: In this article, a brief review of doping and alloying approaches used to enhance the efficacy of the hybrid organic-inorganic perovskite (HOIP) layer, the electron-transport layer (ETL), the hole-transporting layer (HTL), and the electrode layers in PSCs is presented.
Journal ArticleDOI
Recent Advances in Perovskite Micro- and Nanolasers
Journal ArticleDOI
Ionic Additive Engineering Toward High‐Efficiency Perovskite Solar Cells with Reduced Grain Boundaries and Trap Density
Journal ArticleDOI
Inkjet-Printed Triple Cation Perovskite Solar Cells
Florian Mathies,Helge Eggers,Bryce S. Richards,Gerardo Hernandez-Sosa,Uli Lemmer,Ulrich W. Paetzold +5 more
TL;DR: In this article, an inkjet printer was used to deposit triple cation perovskite layers with 10% cesium in a mixed formamidinium/methylammonium lead iodide/bromide composite for solar cells with high temperature and moisture stability.
References
More filters
Journal ArticleDOI
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
TL;DR: Two organolead halide perovskite nanocrystals were found to efficiently sensitize TiO(2) for visible-light conversion in photoelectrochemical cells, which exhibit strong band-gap absorptions as semiconductors.
Journal ArticleDOI
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Michael M. Lee,Joël Teuscher,Tsutomu Miyasaka,Takurou N. Murakami,Takurou N. Murakami,Henry J. Snaith +5 more
TL;DR: A low-cost, solution-processable solar cell, based on a highly crystalline perovskite absorber with intense visible to near-infrared absorptivity, that has a power conversion efficiency of 10.9% in a single-junction device under simulated full sunlight is reported.
Journal ArticleDOI
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Julian Burschka,Norman Pellet,Norman Pellet,Soo-Jin Moon,Robin Humphry-Baker,Peng Gao,Mohammad Khaja Nazeeruddin,Michael Grätzel +7 more
TL;DR: A sequential deposition method for the formation of the perovskite pigment within the porous metal oxide film that greatly increases the reproducibility of their performance and allows the fabrication of solid-state mesoscopic solar cells with unprecedented power conversion efficiencies and high stability.
Journal ArticleDOI
Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%
Hui-Seon Kim,Chang-Ryul Lee,Jeong-Hyeok Im,Ki Beom Lee,Thomas Moehl,Arianna Marchioro,Soo-Jin Moon,Robin Humphry-Baker,Jun-Ho Yum,Jacques-E. Moser,Michael Grätzel,Nam-Gyu Park +11 more
TL;DR: The use of a solid hole conductor dramatically improved the device stability compared to (CH3NH3)PbI3 -sensitized liquid junction cells.
Journal ArticleDOI
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Woon Seok Yang,Jun Hong Noh,Nam Joong Jeon,Young Chan Kim,Seungchan Ryu,Jangwon Seo,Sang Il Seok +6 more
TL;DR: An approach for depositing high-quality FAPbI3 films, involving FAP bI3 crystallization by the direct intramolecular exchange of dimethylsulfoxide (DMSO) molecules intercalated in PbI2 with formamidinium iodide is reported.