Journal ArticleDOI
Gasification of biomass with oxygen-enriched air in a pilot scale two-stage gasifier
Zhiqi Wang,Tao He,Jianguang Qin,Jingli Wu,Jianqing Li,Zhongyue Zi,Guangbo Liu,Jinhu Wu,Li Sun +8 more
Reads0
Chats0
TLDR
In this paper, the effects of the concentrations of feeding oxygen and biomass species on the gasification temperature, gas composition, and carbon conversion efficiency are presented in a pilot scale two-stage gasification gasifier for BTL via one-step DME synthesis.About:
This article is published in Fuel.The article was published on 2015-06-15. It has received 119 citations till now. The article focuses on the topics: Syngas & Biomass to liquid.read more
Citations
More filters
Journal ArticleDOI
A comparative overview of hydrogen production processes
TL;DR: A comparative overview of the major hydrogen production methods is carried out in this article, where the process descriptions along with the technical and economic aspects of 14 different production methods are discussed, and the results regarding both the conventional and renewable methods are presented.
Journal ArticleDOI
Hydrogen production, storage, transportation and key challenges with applications: A review
Abdalla M. Abdalla,Abdalla M. Abdalla,Shahzad Hossain,Shahzad Hossain,Ozzan B. Nisfindy,Atia T. Azad,Mohamed M. Khairat Dawood,Abul Kalam Azad +7 more
TL;DR: In this article, the key challenges that hydrogen industry are confronting are introduced and highlighted to facilitate the use of hydrogen as an alternative energy, which is considered a promising technique that can help manage hydrogen from food waste.
Journal ArticleDOI
An overview of advances in biomass gasification
Vineet Singh Sikarwar,Ming Zhao,Ming Zhao,Peter T. Clough,Joseph G. Yao,Xia Zhong,Mohammad Zaki Memon,Nilay Shah,Edward J. Anthony,Paul S. Fennell +9 more
TL;DR: In this paper, an assessment on the fundamentals such as feedstock types, the impact of different operating parameters, tar formation and cracking, and modelling approaches for biomass gasification is presented.
Journal ArticleDOI
Biofuels production by biomass gasification: A review
TL;DR: A review of the predominant biomass gasification technologies and biofuels obtained from syngas by bio-dieselification can be found in this article, where the authors present a review of these technologies.
Journal ArticleDOI
Small-scale downdraft gasifiers for biomass gasification: A review
TL;DR: In this paper, a review of small-scale downdraft gasifiers for biomass gasification which is focused on design improvements and their effect on the performance of the gasifiers is presented.
References
More filters
Journal ArticleDOI
Methanol-to-hydrocarbons: catalytic materials and their behavior
TL;DR: The literature related to methanol-to-hydrocarbons (MTHC) technology over the past two decades has been reviewed, covering mainly the MTO and MTG reactions as mentioned in this paper.
Journal ArticleDOI
Energy production from biomass (Part 3): Gasification technologies.
TL;DR: The conversion of biomass by gasification into a fuel suitable for use in a gas engine increases greatly the potential usefulness of biomass as a renewable resource.
Journal ArticleDOI
An experimental study on biomass air-steam gasification in a fluidized bed.
TL;DR: The results showed that higher temperature contributed to more hydrogen production, but too high a temperature lowered gas heating value, and a smaller particle was more favorable for higher gas LHV and yield.
Journal ArticleDOI
Main routes for the thermo-conversion of biomass into fuels and chemicals. Part 1: Pyrolysis systems
TL;DR: There are several thermo-chemical routes for biomass-based energy production, such as direct combustion, liquefaction, pyrolysis, supercritical water extraction, gasification, air-steam gasification and so on.
Journal ArticleDOI
Main routes for the thermo-conversion of biomass into fuels and chemicals. Part 2: Gasification systems
TL;DR: The main purpose of biomass gasification is the production of low or medium heating value gas which can be used as fuel gas in an internal combustion engine for power production as discussed by the authors, however, these technologies are an inefficient source of usable energy.