scispace - formally typeset
Journal ArticleDOI

High Reliability and Efficiency Single-Phase Transformerless Inverter for Grid-Connected Photovoltaic Systems

Reads0
Chats0
TLDR
In this article, a high-reliability single-phase transformerless grid-connected inverter that utilizes superjunction MOSFETs to achieve high efficiency for photovoltaic applications is presented.
Abstract
This paper presents a high-reliability single-phase transformerless grid-connected inverter that utilizes superjunction MOSFETs to achieve high efficiency for photovoltaic applications. The proposed converter utilizes two split ac-coupled inductors that operate separately for positive and negative half grid cycles. This eliminates the shoot-through issue that is encountered by traditional voltage source inverters, leading to enhanced system reliability. Dead time is not required at both the high-frequency pulsewidth modulation switching commutation and the grid zero-crossing instants, improving the quality of the output ac-current and increasing the converter efficiency. The split structure of the proposed inverter does not lead itself to the reverse-recovery issues for the main power switches and as such superjunction MOSFETs can be utilized without any reliability or efficiency penalties. Since MOSFETs are utilized in the proposed converter high efficiency can be achieved even at light load operations achieving a high California energy commission (CEC) or European union efficiency of the converter system. It also has the ability to operate at higher switching frequencies while maintaining high efficiency. The higher operating frequencies with high efficiency enables reduced cooling requirements and results in system cost savings by shrinking passive components. With two additional ac-side switches conducting the currents during the freewheeling phases, the photovoltaic array is decoupled from the grid. This reduces the high-frequency common-mode voltage leading to minimized ground loop leakage current. The operation principle, common-mode characteristic and design considerations of the proposed transformerless inverter are illustrated. The total losses of the power semiconductor devices of several existing transformerless inverters which utilize MOSFETs as main switches are evaluated and compared. The experimental results with a 5 kW prototype circuit show 99.0% CEC efficiency and 99.3% peak efficiency with a 20 kHz switching frequency. The high reliability and efficiency of the proposed converter makes it very attractive for single-phase transformerless photovoltaic inverter applications.

read more

Citations
More filters
Journal ArticleDOI

Research on a Novel Modulation Strategy for Auxiliary Resonant Commutated Pole Inverter With the Smallest Loss in Auxiliary Commutation Circuits

TL;DR: In this article, a novel modulation strategy based on an improved ARCP inverter was proposed to realize soft-switching for all switches and avoid the superposition of resonance current and load current at commutation moments in ACCs and make the maximum current through ACCs approximately equal to load current in commutation processes.
Journal ArticleDOI

High Efficiency Dual-Mode Current Modulation Method for Low-Power DC/AC Inverters

TL;DR: In this article, a dual-mode current modulation method combining boundary conduction mode (BCM) and zero voltage switching (ZVS) was proposed to improve the efficiency of the microinverter.
Journal ArticleDOI

An Online ESR Estimation Method for Output Capacitor of Boost Converter

TL;DR: The proposed estimation method can obtain ESR for the converter operating at different working conditions such as resistive loads and converter loads and effect of temperature on ESR is incorporated for accurate determination of the health of capacitor.
Journal ArticleDOI

A Single-Stage Soft-Switching High-Frequency AC-Link PV Inverter: Design, Analysis, and Evaluation of Si-Based and SiC-Based Prototypes

TL;DR: A high-power-density and reliable inverter topology, which transfers the maximum power of a PV array to the load in one power conversion stage, along with the soft-switching capability of the proposed three-phase PV inverter, which promises high efficiency at all operating points.
Journal ArticleDOI

Overview of grid-connected two-stage transformer-less inverter design

TL;DR: The theoretical background of PV devices, an overview of MPPT controllers and common mode leakage current, and a detailed investigation of different inverter topologies regarding the ground leakage current are given.
References
More filters
Journal ArticleDOI

A review of single-phase grid-connected inverters for photovoltaic modules

TL;DR: In this article, the authors focus on inverter technologies for connecting photovoltaic (PV) modules to a single-phase grid and categorize the inverters into four classifications: 1) the number of power processing stages in cascade; 2) the type of power decoupling between the PV module(s) and the single phase grid; 3) whether they utilizes a transformer (either line or high frequency) or not; and 4) the kind of grid-connected power stage.
Journal ArticleDOI

A Review of the Single Phase Photovoltaic Module Integrated Converter Topologies With Three Different DC Link Configurations

TL;DR: In this paper, a topology study of the PV MICs in the power range below 500 W and covers most topologies recently proposed for MIC applications is presented, where the MIC topologies are classified into three different arrangements based on the dc link configurations.
Journal ArticleDOI

Topologies of single-phase inverters for small distributed power generators: an overview

TL;DR: In this paper, an overview of single-phase inverters developed for small distributed power generators is presented, compared, and evaluated against the requirements of power decoupling and dual-grounding, the capabilities for grid-connected or/and stand-alone operations, and specific DG applications.
Journal ArticleDOI

A New High-Efficiency Single-Phase Transformerless PV Inverter Topology

TL;DR: This paper proposes a new topology, based on the H-bridge with a new ac bypass circuit consisting of a diode rectifier and a switch with clamping to the dc midpoint, which achieves high conversion efficiency and low leakage current.
Journal ArticleDOI

Transformerless Inverter for Single-Phase Photovoltaic Systems

TL;DR: In this article, the authors proposed a new high-efficiency topology that generates no varying common-mode voltage and requires the same low-input voltage as the bipolar PWM full bridge.
Related Papers (5)