scispace - formally typeset
Journal ArticleDOI

High Reliability and Efficiency Single-Phase Transformerless Inverter for Grid-Connected Photovoltaic Systems

Reads0
Chats0
TLDR
In this article, a high-reliability single-phase transformerless grid-connected inverter that utilizes superjunction MOSFETs to achieve high efficiency for photovoltaic applications is presented.
Abstract
This paper presents a high-reliability single-phase transformerless grid-connected inverter that utilizes superjunction MOSFETs to achieve high efficiency for photovoltaic applications. The proposed converter utilizes two split ac-coupled inductors that operate separately for positive and negative half grid cycles. This eliminates the shoot-through issue that is encountered by traditional voltage source inverters, leading to enhanced system reliability. Dead time is not required at both the high-frequency pulsewidth modulation switching commutation and the grid zero-crossing instants, improving the quality of the output ac-current and increasing the converter efficiency. The split structure of the proposed inverter does not lead itself to the reverse-recovery issues for the main power switches and as such superjunction MOSFETs can be utilized without any reliability or efficiency penalties. Since MOSFETs are utilized in the proposed converter high efficiency can be achieved even at light load operations achieving a high California energy commission (CEC) or European union efficiency of the converter system. It also has the ability to operate at higher switching frequencies while maintaining high efficiency. The higher operating frequencies with high efficiency enables reduced cooling requirements and results in system cost savings by shrinking passive components. With two additional ac-side switches conducting the currents during the freewheeling phases, the photovoltaic array is decoupled from the grid. This reduces the high-frequency common-mode voltage leading to minimized ground loop leakage current. The operation principle, common-mode characteristic and design considerations of the proposed transformerless inverter are illustrated. The total losses of the power semiconductor devices of several existing transformerless inverters which utilize MOSFETs as main switches are evaluated and compared. The experimental results with a 5 kW prototype circuit show 99.0% CEC efficiency and 99.3% peak efficiency with a 20 kHz switching frequency. The high reliability and efficiency of the proposed converter makes it very attractive for single-phase transformerless photovoltaic inverter applications.

read more

Citations
More filters
Journal ArticleDOI

Low-Voltage Ride-Through of Single-Phase Transformerless Photovoltaic Inverters

TL;DR: In this article, the LVRT capability of three mainstream single-phase transformerless PV inverters under grid faults is explored in order to map future challenges, and control strategies with reactive power injection are also discussed.
Journal ArticleDOI

Trends and Challenges of Grid-Connected Photovoltaic Systems – A Review

TL;DR: In this paper, a review of the existing and future standards that address the technical challenges associated with the growing number of Grid-Connected Photovoltaic Systems (GCPVS) is presented.
Journal ArticleDOI

Comparison and Analysis of Single-Phase Transformerless Grid-Connected PV Inverters

TL;DR: In this paper, a simple modified H-bridge zero-voltage state rectifier is proposed, to combine the benefits of the low-loss ac-decoupling method and the complete leakage current elimination of the CMV clamping method.
Journal ArticleDOI

Single phase transformerless inverter topologies for grid-tied photovoltaic system: A review

TL;DR: In this paper, the leakage current issues of transformerless inverter, which depends on the topology structure and modulation scheme, have to be addressed very carefully, and a performance comparison in MATLAB/Simulink environment is done among different topologies.
Journal ArticleDOI

An intelligent system architecture in home energy management systems (HEMS) for efficient demand response in smart grid

TL;DR: In this paper, the authors presented the outcome of a new system architecture and control algorithm that can use both battery storage and manage the temperature of thermal appliances, which is an important part of the smart grid that enables residential customers to execute demand response programs autonomously.
References
More filters
Journal ArticleDOI

Power conditioning circuit topologies

TL;DR: An overview of PCS architectures and circuit topologies for low-voltage energy source in single-phase grid-tie applications is provided in this paper, where the authors focus on those relatively new but practical system architectures.
Journal ArticleDOI

Admittance Compensation in Current Loop Control for a Grid-Tie LCL Fuel Cell Inverter

TL;DR: In this paper, a single-phase grid-tie inverter has been systematically derived with representations of conventional transfer function format using admittance terms for controller design and loop compensation, and the entire current loop controller and admittance compensation have been simulated and tested with a 5kW fuel cell prototype.
Proceedings ArticleDOI

Exploring the pareto front of multi-objective single-phase PFC rectifier design optimization - 99.2% efficiency vs. 7kW/din 3 power density

TL;DR: In this article, the maximum attainable efficiency and the dependency of the efficiency limit on technological parameters are determined for single-phase PFC boost rectifiers, and a comprehensive numerical efficiency optimization is carried out which identifies an efficiency limit of 99.2% for a 3.2kW system.
Journal ArticleDOI

A Novel PV Microinverter With Coupled Inductors and Double-Boost Topology

TL;DR: In this paper, a coupled-inductor double-boost inverter (CIDBI) is proposed for microinverter photovoltaic (PV) module system, and the control strategy applied to it is analyzed.
Patent

DC/AC converter to convert direct electric voltage into alternating voltage or into alternating current

TL;DR: In this article, a DC/AC converter is disclosed having two DC voltage connections ( 1,2 ), between which are provided in a parallel circuit configuration, an intermediate energy storage (C 1 ) and a bridge circuit providing at least two parallel branches, each branch providing two in-series-connected switch units (A,B and C,D), to each of which a rectifier diode (DA,DB,DC DD) is connected in parallel, and each single AC connection is connected via a connecting line, in each case an inductor (L 1 respectively L 2 )
Related Papers (5)