Journal ArticleDOI
Phase change materials integrated in building walls: A state of the art review
Reads0
Chats0
TLDR
In this article, an extensive review on the incorporation of PCM into construction materials and elements by direct incorporation, immersion, encapsulation, shape-stabilization and form-stable composite PCMs is presented.Abstract:
The building sector is the dominant energy consumer with a total 30% share of the overall energy consumption and accounts for one-third of the greenhouse gas emissions around the world. Moreover, in recent years the energy demands for buildings have increased very rapidly due to increase in the growth rate of population and improvement in living standards of people. Furthermore, fossil fuels will continue to dominate the world's primary energy by 2030. Thus, the increase in energy demand, shortage of fossil fuels and environmental concerns has provided impetus to the development of sustainable building and renewable energy resources. Thermal energy storage is an efficient method for applying to building envelopes to improve the energy efficiency of buildings. This, in turn, reduces the environmental impact related to energy usage. The combination of construction materials and PCM is an efficient way to increase the thermal energy storage capacity of construction elements. Therefore, an extensive review on the incorporation of PCM into construction materials and elements by direct incorporation, immersion, encapsulation, shape-stabilization and form-stable composite PCMs is presented. For the first time, the differentiation between shape-stabilized and form-stable composite PCM has been made. Moreover, various construction materials such as diatomite, expanded perlite and graphite, etc. which are used as supports for form-stable composite PCM along with their worldwide availability are extensively discussed. One of the main aims of this review paper is to focus on the test methods which are used to determine the chemical compatibility, thermal properties, thermal stability and thermal conductivity of the PCM. Hence, the details related to calibration, sample preparation, test cell and analysis of test results are comprehensively covered. Finally, because of the renewed interest in integration of PCM in wallboards and concrete, an up-to-date review with focus on PCM enhanced wallboard and concrete for building applications is added.read more
Citations
More filters
Journal ArticleDOI
A review on phase change material (PCM) for sustainable passive cooling in building envelopes
Hussein J. Akeiber,Payam Nejat,Muhd Zaimi Abd Majid,Mazlan Abdul Wahid,Fatemeh Jomehzadeh,Iman Zeynali Famileh,John Kaiser Calautit,Ben Richard Hughes,Sheikh Ahmad Zaki +8 more
TL;DR: In this article, a comprehensive list of different organic, inorganic and eutectic phase change materials appropriate for passive cooling in buildings is reviewed, and full-scale testing and numerical modeling are found to be the most popular investigative methods used for experimental and theoretical analysis of PCMs.
Journal ArticleDOI
Developments in organic solid–liquid phase change materials and their applications in thermal energy storage
R.K. Sharma,Poo Balan Ganesan,V.V. Tyagi,Hendrik Simon Cornelis Metselaar,Shanti C. Sandaran +4 more
TL;DR: In this paper, a review of organic phase change materials (PCMs) is presented, focusing on three aspects: the materials, encapsulation and applications of organic PCMs, and providing an insight on the recent developments in applications of these materials.
Journal ArticleDOI
Phase change materials (PCM) for cooling applications in buildings: A review
TL;DR: In this article, the authors present an overview of different phase change materials (PCM) applications in buildings for reducing cooling loads under different climate conditions, and the factors affecting the successful and the effective use of the PCM.
Journal ArticleDOI
Phase change materials and thermal energy storage for buildings
Alvaro de Gracia,Luisa F. Cabeza +1 more
TL;DR: In this paper, a review of thermal energy storage (TES) in buildings using sensible, latent heat and thermochemical energy storage is presented, showing that sustainable heating and cooling with TES in buildings can be achieved through passive systems in building envelopes, phase change materials (PCM) in active systems, sorption systems, and seasonal storage.
Journal ArticleDOI
Accelerating the discovery of materials for clean energy in the era of smart automation
Daniel P. Tabor,Loïc M. Roch,Semion K. Saikin,Christoph Kreisbeck,Dennis Sheberla,Joseph Montoya,Shyam Dwaraknath,Muratahan Aykol,Carlos Ortiz,Hermann Tribukait,Carlos Amador-Bedolla,Christoph J. Brabec,Benji Maruyama,Kristin A. Persson,Kristin A. Persson,Alán Aspuru-Guzik +15 more
TL;DR: It is envisioned that a closed-loop approach, which combines high-throughput computation, artificial intelligence and advanced robotics, will sizeably reduce the time to deployment and the costs associated with materials development.
References
More filters
Journal ArticleDOI
An organic PCM storage system with adjustable melting temperature
Book ChapterDOI
Differential thermal analysis and differential scanning calorimetry
P. J. Haines,F. W. Wilburn +1 more
TL;DR: In this article, the melting point of an organic chemical is determined by checking against known materials for purity and stability, and this cannot be done by TG, since it involves no mass change.
Journal ArticleDOI
Fatty acid esters-based composite phase change materials for thermal energy storage in buildings
TL;DR: In this paper, fatty acid esters-based composite phase change materials (PCMs) for thermal energy storage were prepared by blending ETP and ETS with diatomite and expanded perlite (EP).
Book
Structure and Properties of Fat Crystal Networks
TL;DR: In this paper, Campos et al. present a review of the state-of-the-art in the field of liquid TAGs and propose a solution to the problem of static analysis of TAGs.
Journal ArticleDOI
Kaolin and halloysite deposits of China
TL;DR: The quality of existing paper/board-coating clays is not up to the quality of imported material from Brazil and the USA and there is an urgent need to develop local resources to meet the present and future demands of the market as mentioned in this paper.