scispace - formally typeset
Open AccessJournal ArticleDOI

The effect of pyrolysis conditions on biochar stability as determined by three methods

TLDR
In this paper, the Edinburgh accelerated ageing tool (Edinburgh stability tool) was used to evaluate the long-term stability of biochar in three feedstocks (Pine, Rice husk and Wheat straw) at four temperatures (350, 450, 550 and 650°C).
Abstract
Biochar is the porous, carbonaceous material produced by thermochemical treatment of organic materials in an oxygen-limited environment. In general, most biochar can be considered resistant to chemical and biological decomposition, and therefore suitable for carbon (C) sequestration. However, to assess the C sequestration potential of different types of biochar, a reliable determination of their stability is needed. Several techniques for assessing biochar stability have been proposed, e.g. proximate analysis, oxygen (O): C ratio and hydrogen (H): C ratio; however, none of them are yet widely recognized nor validated for this purpose. Biochar produced from three feedstocks (Pine, Rice husk and Wheat straw) at four temperatures (350, 450, 550 and 650 °C) and two heating rates (5 and 100 °C min−1) was analysed using three methods of stability determination: proximate analysis, ultimate analysis and a new analytical tool developed at the UK Biochar Research Centre known as the Edinburgh accelerated ageing tool (Edinburgh stability tool). As expected, increased pyrolysis temperatures resulted in higher fractions of stable C and total C due to an increased release of volatiles. Data from the Edinburgh stability tool were compared with those obtained by the other methods, i.e. fixed C, volatile matter, O : C and H : C ratios, to investigate potential relationships between them. Results of this comparison showed that there was a strong correlation (R > 0.79) between the stable C determined by the Edinburgh stability tool and fixed C, volatile matter and O : C, however, H : C showed a weaker correlation (R = 0.65). An understanding of the influence of feedstock and production conditions on the long-term stability of biochar is pivotal for its function as a C mitigation measure, as production and use of unstable biochar would result in a relatively rapid return of C into the atmosphere, thus potentially intensifying climate change rather than alleviating it.

read more

Citations
More filters
Journal ArticleDOI

Biochar physicochemical properties: pyrolysis temperature and feedstock kind effects

TL;DR: In this article, the impact of pyrolysis temperature and the type of biomass on the physicochemical characteristics of biochar and its impact on soil fertility is discussed, and a review succinctly presents the impact.
Journal ArticleDOI

Physico-chemical properties and microbial responses in biochar-amended soils: Mechanisms and future directions

TL;DR: In this article, a meta-analysis revealed that slow pyrolyzed biochars produced from various feedstocks at temperatures from 300°C to 600°C consistently increased some physico-chemical properties (i.e., pH, cation exchange capacity and aggregation) and microbial parameters (e.g., abundance and community structure of microorganisms) in a vast number of soils during short (≤90 days) laboratory incubations and longer (1-3 years) field studies.
Journal ArticleDOI

Heterogeneity of biochar properties as a function of feedstock sources and production temperatures.

TL;DR: The results showed that both feedstock properties and production conditions are important for determining the yield and properties of biochar, but their respective influence changes with the property or set of properties of interest.
Journal ArticleDOI

Biochar stability in soil: meta-analysis of decomposition and priming effects

TL;DR: In this article, a meta-analysis of the biochar decomposition in soil was performed and the authors concluded that only a small part of biochar is bioavailable and that the remaining 97% contribute directly to long-term carbon sequestration in soil.
Journal ArticleDOI

Insight into Multiple and Multilevel Structures of Biochars and Their Potential Environmental Applications: A Critical Review

TL;DR: In this review, multiple and multilevel structures of biochars are interpreted based on their elemental compositions, phase components, surface properties, and molecular structures to design a "smart" biochar for environmentally sustainable applications.
References
More filters
Journal ArticleDOI

Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review

TL;DR: A review of the recent developments in the wood pyrolysis and reports the characteristics of the resulting bio-oils, which are the main products of fast wood pyrotechnics, can be found in this paper.
BookDOI

Biochar for Environmental Management: Science and Technology

TL;DR: In this article, Flannery presented a Biochar Classification and Test Methods for determining the quantity of Biochar within Soils and its effect on Nutrient Transformations and Nutrient Leaching.
Journal ArticleDOI

Interpretation of the Correlation Coefficient: A Basic Review

TL;DR: The basic aspects of correlation analysis are discussed with examples given from professional journals and the interpretations and limitations of the correlation coefficient are focused on.
Journal ArticleDOI

An overview of the chemical composition of biomass

TL;DR: An extended overview of the chemical composition of biomass was conducted in this article, where reference peer-reviewed data for chemical composition was used to describe the biomass system, including traditional and complete proximate, ultimate and ash analyses.
Book ChapterDOI

A review of biochar and its use and function in soil

TL;DR: The potential to sequester carbon as thermally stabilized (charred) biomass using existing organic resource is estimated to be at least 1 Gt/yr − 1 and biochar, defined by its useful application to soil, is expected to provide a benefit from enduring physical and chemical properties.
Related Papers (5)