Showing papers on "Fouling published in 2019"

A water lily-inspired hierarchical design for stable and efficient solar evaporation of high-salinity brine.

Abstract: In recent years, interfacial solar vapor generation has shown great potential in realizing desalination and wastewater treatment with high energy conversion efficiency. However, high evaporation rate cannot be maintained because of the seemingly unavoidable fouling or salt accumulation on the solar absorbers. The degradation accelerates as the solute concentration increases. Here, we demonstrate a water lily–inspired hierarchical structure that enables efficient evaporation (~80% solar-to-vapor efficiency) out of high-salinity brine [10 weight % (wt %)] and wastewater containing heavy metal ions (30 wt %). More notably, neither decrease in evaporation rate nor fouling on absorbers was observed during the entire evaporation process until water and solute were completely separated. With the capabilities of stable and high-rate evaporation out of high-salinity brine and the effective separation of solute from water, it is expected that this technology can have direct implications in various fields such as wastewater treatment, sea-salt production, and metal recycling.

Electroactive Membranes for Water Treatment: Enhanced Treatment Functionalities, Energy Considerations, and Future Challenges.

Abstract: To meet the increasing demand for water, potable water providers are turning toward unconventional waters, such as seawater and wastewater. These highly saline and/or heavily contaminated water sources are difficult to treat, demanding the use of advanced technology not typically used to treat conventional water sources such as river water or fresh groundwater. Of these advanced technologies, membrane separation processes are fast becoming the most widely used methods to convert these marginal waters into useful resources. The main factors contributing to the widespread adoption of membrane separation processes for water treatment include their modular nature, small physical footprint, and relative energy efficiency compared to traditional distillation processes. In addition, membranes present a physical barrier to pathogens, which is an attractive feature in terms of disinfection credits. However, traditional membrane materials suffer from several distinct drawbacks, which include membrane fouling (the accumulation of material on the membrane surface that blocks the flow of water), the need for high-pressure membranes (such as reverse osmosis (RO) or nanofiltration (NF)) or membrane/thermal processes (e.g., membrane distillation (MD)) to remove small contaminant compounds (e.g., trace metals, salt, endocrine disrupting compounds), and a pressure-driven membrane's inability to effectively remove small, uncharged molecules (e.g., N-nitrosodimethylamine (NDMA), phenol, acetone, and boron). Electrically driven physical and chemical phenomena, such as electrophoresis, electrostatic repulsion, dielectrophoresis, and electricity-driven redox reactions, have long been coupled to membrane-based separation processes, in a process known as electrofiltration. However, it is only in recent years that appropriate membrane materials (i.e., electrically conducting membranes (EMs)) have been developed that enable the efficient use of these electro-driven processes. Specifically, the development of EM materials (both polymeric and inorganic) have reduced the energy consumption of electrofiltration by using the membrane as an electrode in an electrochemical circuit. In essence, a membrane-electrode allows for the concentrated delivery of electrical energy directly to the membrane/water interface where the actual separation process takes place. In the past, metal electrodes were placed on either side of the membrane, which resulted in large potentials needed to drive electrochemical/electrokinetic phenomena. The use of a membrane-electrode dramatically reduces the required potentials, which reduces energy consumption and can also eliminate electrocorrosion and the formation of undesirable byproducts. In this Account, we review recent developments in the field of electrofiltration, with a focus on two water treatment applications: desalination and water reuse (wastewater or contaminated groundwater recycling). Specifically, we discuss how EMs can be used to minimize multiple forms of fouling (biofouling, mineral scaling, organic fouling); how electrochemical reactions at the membrane/water interface are used to destroy toxic contaminants, clean a membrane surface, and transform the local pH environment, which enhances the rejection of certain contaminants; how electric fields and electrostatic forces can be used to reorient molecules at the membrane/water interface; and how electrical energy can be transformed into thermal energy to drive separation processes. A special emphasis is placed on explicitly defining the additional energy consumption associated with the electrochemical phenomena, as well as the additional cost associated with fabricating EM materials. In addition, we will discuss current limitations of the electrofiltration process, with particular attention given to the current limitations of membrane materials and the future research needs in the area of membrane materials and module development.

3D-Printed Anti-Fouling Cellulose Mesh for Highly Efficient Oil/Water Separation Applications.

Abstract: The ability of additive manufacturing to print mesh structure was exploited to fabricate highly efficient filtration meshes for oil/water separation applications. Through Direct Ink Writing (DIW) t...

Supramolecular-Based Regenerable Coating Layer of a Thin-Film Composite Nanofiltration Membrane for Simultaneously Enhanced Desalination and Antifouling Properties.

Abstract: A high-performance nanofiltration (NF) membrane with simultaneously improved desalination and antifouling properties while maintaining regeneration ability is highly desirable in water treatment. Surface modification is an effective approach to enhance the performance of NF membranes. In the present study, a multifunctional thin-film composite NF membrane (Fe-TFC) was fabricated via coating a regenerable ferric ion-tannic acid (FeIII-TA) layer on the nascent polyamide membrane surface. The Fe-TFC membrane exhibited enhanced hydrophilicity, smaller pore size, and lower negative charge compared with the control membrane. The salt rejections and selectivity of divalent to monovalent ions were greatly improved with only a slight decrease in water permeability due to the presence of the coating layer. Meanwhile, dynamic fouling tests with humic acid demonstrated that the Fe-TFC membrane possessed an enhanced antifouling property and excellent flux recovery rate. After coating, the normalized water flux and flux recovery of the Fe-TFC membrane increased from 0.02 to 0.26 and 32.1 to 76.4% at the end of five cycles of fouling tests, respectively. In addition, the resultant membrane exhibited excellent durability and stability under harsh conditions for ∼10 days. Interestingly, the fouled coating layer can be easily removed by HCl cleaning and regenerated through an in situ strategy. Consequently, the regenerated membranes presented stable antifouling properties and desalination performance after several times of regeneration. It was demonstrated that the unique feature of FeIII-TA networks enables the coating layer to act as a protective layer for the underlying polyamide membrane, leading to the high performance of the composite membrane. This study provides a new insight for surface functionalization and easy regeneration of the TFC nanofiltration membrane in water treatment technology.

Graphene Array-Based Anti-fouling Solar Vapour Gap Membrane Distillation with High Energy Efficiency.

Abstract: Photothermal membrane distillation (MD) is a promising technology for desalination and water purification. However, solar-thermal conversion suffers from low energy efficiency (a typical solar-water efficiency of ~ 50%), while complex modifications are needed to reduce membrane fouling. Here, we demonstrate a new concept of solar vapour gap membrane distillation (SVGMD) synergistically combining self-guided water transport, localized heating, and separation of membrane from feed solution. A free-standing, multifunctional light absorber based on graphene array is custom-designed to locally heat the thin water layer transporting through graphene nanochannels. The as-generated vapour passes through a gap and condenses, while salt/contaminants are rejected before reaching the membrane. The high solar-water efficiency (73.4% at 1 sun), clean water collection ratio (82.3%), excellent anti-fouling performance, and stable permeate flux in continuous operation over 72 h are simultaneously achieved. Meanwhile, SVGMD inherits the advantage of MD in microorganism removal and water collection, enabling the solar-water efficiency 3.5 times higher compared to state-of-the-art solar vapour systems. A scaled system to treat oil/seawater mixtures under natural sunlight is developed with a purified water yield of 92.8 kg m−2 day−1. Our results can be applied for diverse mixed-phase feeds, leading to the next-generation solar-driven MD technology. Highlights: 1 New concept of solar vapour gap membrane distillation (SVGMD) is based on synergizing of nanochannel-guided water transport, localized heating, and membrane separation from feed solution.2 First-time introduction of the gap enables long-term stability and non-fouling membrane.3 SVGMD exhibits a solar-water energy efficiency higher than state-of-the-art solar vapour systems.

Highly Efficient Solar Steam Generation from Activated Carbon Fiber Cloth with Matching Water Supply and Durable Fouling Resistance

Abstract: Interfacial solar steam generation is a green and promising technique to capture solar energy for brine water desalination; however, it still faces grand challenges of thermal loss and salt fouling...