Kongu Engineering College

About: Kongu Engineering College is a based out in . It is known for research contribution in the topics: Computer science & Cluster analysis. The organization has 2001 authors who have published 1978 publications receiving 16923 citations.

Optimization of Foaming Properties and Foam Mat Drying of Muskmelon Using Soy Protein

Abstract: The effect of concentration of soy protein isolate (SPI), carboxymethyl cellulose (CMC) and whipping time on foaming properties of muskmelon pulp was investigated. Box–Behnken design of experiments was used to optimize the foaming process. The optimum conditions for foaming process were found to be 8.71% of SPI concentration, 0.54% of CMC concentration and a whipping time of 5.7 min. The muskmelon foamed at optimum conditions was dried using hot air dryer at 50, 60 and 70C. The drying rate was found to be high at 70C. The effective moisture diffusivity of foamed muskmelon pulp was determined and compared with the unfoamed muskmelon pulp. The powder properties such as density, color, water absorption index, solubility index, Hausner ratio and Carr index were also determined for muskmelon. Practical Applications Fruit juice powders have been considered as economically viable over their liquid counterparts because it has improved shelf life, low volume/weight, less space volume required for storage, simpler handling and transportation. Among various drying processes, the foam mat drying process has be successfully used for the production of fruit powders because of rapid drying at lower temperature, retention of high nutrition, easy reconstitution characteristics and its cost-effectiveness. This foam mat drying process is much cheaper than freeze and spray drying for the production of fruit powders. The muskmelon powders find application in snacks, beverages, ice creams and bakery industries for production of many food products, and it is also used as a starter for the preparation of instant foods and pastes.

Characterization of sisal/cotton fibre woven mat reinforced polymer hybrid composites:

Abstract: The present research work addressed the results of experimental investigation on the mechanical properties and free vibration behaviours of sisal/cotton fabric reinforced polyester hybrid composites. Influence of fibre content and changing layer pattern (CLP) on the mechanical properties and free vibration characteristics are analysed. Hybrid composites are fabricated with simple hand lay-up method followed by compression moulding process. Natural frequency and modal damping values of hybrid composites are analysed by experimental modal analysis. Mechanical properties of composites are measured according to ASTM standards. It is found that an increase in the lamina content in the composite increase the mechanical and damping properties. The maximum mechanical properties are obtained for 40% fibre volume fraction (Vf) in sisal and cotton direction. Maximum natural frequency is found at 40% fibre Vf. By CLP, mechanical properties and damping characteristics are found intermittence of sisal and cotton direct...