Institution
National Institute of Standards and Technology
Government•Gaithersburg, Maryland, United States•
About: National Institute of Standards and Technology is a government organization based out in Gaithersburg, Maryland, United States. It is known for research contribution in the topics: Laser & Scattering. The organization has 26667 authors who have published 60661 publications receiving 2215547 citations. The organization is also known as: National Bureau of Standards & NIST.
Topics: Laser, Scattering, Neutron scattering, NIST, Spectroscopy
Papers published on a yearly basis
Papers
More filters
••
TL;DR: Although RBAC continues to evolve as users, researchers, and vendors gain experience with its application, the features and components proposed in this standard represent a fundamental and stable set of mechanisms that may be enhanced by developers in further meeting the needs of their customers.
Abstract: In this article we propose a standard for role-based access control (RBAC). Although RBAC models have received broad support as a generalized approach to access control, and are well recognized for their many advantages in performing large-scale authorization management, no single authoritative definition of RBAC exists today. This lack of a widely accepted model results in uncertainty and confusion about RBAC's utility and meaning. The standard proposed here seeks to resolve this situation by unifying ideas from a base of frequently referenced RBAC models, commercial products, and research prototypes. It is intended to serve as a foundation for product development, evaluation, and procurement specification. Although RBAC continues to evolve as users, researchers, and vendors gain experience with its application, we feel the features and components proposed in this standard represent a fundamental and stable set of mechanisms that may be enhanced by developers in further meeting the needs of their customers. As such, this document does not attempt to standardize RBAC features beyond those that have achieved acceptance in the commercial marketplace and research community, but instead focuses on defining a fundamental and stable set of RBAC components. This standard is organized into the RBAC Reference Model and the RBAC System and Administrative Functional Specification. The reference model defines the scope of features that comprise the standard and provides a consistent vocabulary in support of the specification. The RBAC System and Administrative Functional Specification defines functional requirements for administrative operations and queries for the creation, maintenance, and review of RBAC sets and relations, as well as for specifying system level functionality in support of session attribute management and an access control decision process.
2,529 citations
••
2,523 citations
••
TL;DR: The carrier-envelope phase of the pulses emitted by a femtosecond mode-locked laser is stabilized by using the powerful tools of frequency-domain laser stabilization to perform absolute optical frequency measurements that were directly referenced to a stable microwave clock.
Abstract: We stabilized the carrier-envelope phase of the pulses emitted by a femtosecond mode-locked laser by using the powerful tools of frequency-domain laser stabilization. We confirmed control of the pulse-to-pulse carrier-envelope phase using temporal cross correlation. This phase stabilization locks the absolute frequencies emitted by the laser, which we used to perform absolute optical frequency measurements that were directly referenced to a stable microwave clock.
2,499 citations
01 Jul 1943
TL;DR: In this paper, a simple formula is suggested for describing the stress-strain curve in terms of three parameters; namely, Young's modulus and two secant yield strengths.
Abstract: A simple formula is suggested for describing the stress-strain curve in terms of three parameters; namely, Young's modulus and two secant yield strengths. Dimensionless charts are derived from this formula for determining the stress-strain curve, the tangent modulus, and the reduced modulus of a material for which these three parameters are given. Comparison with the tensile and compressive data on aluminum-alloy, stainless-steel, and carbon-steel sheet in NACA Technical Note No. 840 indicates that the formula is adequate for most of these materials. The formula does not describe the behavior of alclad sheet, which shows a marked change in slope at low stress. It seems probable that more than three parameters will be necessary to represent such stress-strain curves adequately.
2,473 citations
••
01 Feb 1966TL;DR: In this paper, a theoretical analysis of the relationship between the expectation value of the standard deviation of the frequency fluctuations for any finite number of data samples and the infinite time average value of a standard deviation is presented.
Abstract: A theoretical development is presented which results in a relationship between the expectation value of the standard deviation of the frequency fluctuations for any finite number of data samples and the infinite time average value of the standard deviation, which provides an invariant measure of an important quality factor of a frequency standard. A practical and straightforward method of determining the power spectral density of the frequency fluctuations from the variance of the frequency fluctuations, the sampling time, the number of samples taken, and the dependence on system bandwidth is also developed. Additional insight is also given into some of the problems that arise from the presence of "flicker noise" (spectrum proportional to |ω|-1) modulation of the frequency of an oscillator. The theory is applied in classifying the types of noise on the signals of frequency standards made available at NBS, Boulder Laboratories, such as: masers (both H and N15H 3 ), the cesium beam frequency standard employed as the U. S. Frequency Standard, and rubidium gas cells. "Flicker noise" frequency modulation was not observed on the signals of masers for sampling times ranging from 0.1 second to 4 hours. In a comparison between the NBS hydrogen maser and the NBS III cesium beam, uncorrelated random noise was observed on the frequency fluctuations for sampling times extending to 4 hours; the fractional standard deviations of the frequency fluctuations were as low as 5 parts in 1014.
2,455 citations
Authors
Showing all 26760 results
Name | H-index | Papers | Citations |
---|---|---|---|
Zhong Lin Wang | 245 | 2529 | 259003 |
John A. Rogers | 177 | 1341 | 127390 |
J. N. Butler | 172 | 2525 | 175561 |
Yury Gogotsi | 171 | 956 | 144520 |
Zhenan Bao | 169 | 865 | 106571 |
Gang Chen | 167 | 3372 | 149819 |
Michel C. Nussenzweig | 165 | 516 | 87665 |
Donald G. Truhlar | 165 | 1518 | 157965 |
Tobin J. Marks | 159 | 1621 | 111604 |
Jongmin Lee | 150 | 2257 | 134772 |
Galen D. Stucky | 144 | 958 | 101796 |
Thomas P. Russell | 141 | 1012 | 80055 |
William D. Travis | 137 | 605 | 93286 |
Peter Zoller | 134 | 734 | 76093 |
Anthony G. Evans | 130 | 576 | 65803 |