Showing papers in "Theoretical and Applied Genetics in 2004"

A high-density microsatellite consensus map for bread wheat (Triticum aestivum L.)

Abstract: A microsatellite consensus map was constructed by joining four independent genetic maps of bread wheat. Three of the maps were F1-derived, doubled-haploid line populations and the fourth population was ‘Synthetic’ × ‘Opata’, an F6-derived, recombinant-inbred line population. Microsatellite markers from different research groups including the Wheat Microsatellite Consortium, GWM, GDM, CFA, CFD, and BARC were used in the mapping. A sufficient number of common loci between genetic maps, ranging from 52 to 232 loci, were mapped on different populations to facilitate joining the maps. Four genetic maps were developed using MapMaker V3.0 and JoinMap V3.0. The software CMap, a comparative map viewer, was used to align the four maps and identify potential errors based on consensus. JoinMap V3.0 was used to calculate marker order and recombination distances based on the consensus of the four maps. A total of 1,235 microsatellite loci were mapped, covering 2,569 cM, giving an average interval distance of 2.2 cM. This consensus map represents the highest-density public microsatellite map of wheat and is accompanied by an allele database showing the parent allele sizes for every marker mapped. This enables users to predict allele sizes in new breeding populations and develop molecular breeding and genomics strategies.

A new integrated genetic linkage map of the soybean.

Abstract: A total of 391 simple sequence repeat (SSR) markers designed from genomic DNA libraries, 24 derived from existing GenBank genes or ESTs, and five derived from bacterial artificial chromosome (BAC) end sequences were developed. In contrast to SSRs derived from EST sequences, those derived from genomic libraries were a superior source of polymorphic markers, given that the mean number of tandem repeats in the former was significantly less than that of the latter (P<0.01). The 420 newly developed SSRs were mapped in one or more of five soybean mapping populations: ‘Minsoy’ × ‘Noir 1’, ‘Minsoy’ × ‘Archer’, ‘Archer’ × ‘Noir 1’, ‘Clark’ × ‘Harosoy’, and A81-356022 × PI468916. The JoinMap software package was used to combine the five maps into an integrated genetic map spanning 2,523.6 cM of Kosambi map distance across 20 linkage groups that contained 1,849 markers, including 1,015 SSRs, 709 RFLPs, 73 RAPDs, 24 classical traits, six AFLPs, ten isozymes, and 12 others. The number of new SSR markers added to each linkage group ranged from 12 to 29. In the integrated map, the ratio of SSR marker number to linkage group map distance did not differ among 18 of the 20 linkage groups; however, the SSRs were not uniformly spaced over a linkage group, clusters of SSRs with very limited recombination were frequently present. These clusters of SSRs may be indicative of gene-rich regions of soybean, as has been suggested by a number of recent studies, indicating the significant association of genes and SSRs. Development of SSR markers from map-referenced BAC clones was a very effective means of targeting markers to marker-scarce positions in the genome.

QTLs for Na + and K + uptake of the shoots and roots controlling rice salt tolerance

Abstract: An F2 and an equivalent F3 population derived from a cross between a high salt-tolerance indica variety, Nona Bokra, and a susceptible elite japonica variety, Koshihikari, were produced. We performed QTL mapping for physiological traits related to rice salt-tolerance. Three QTLs for survival days of seedlings (SDSs) under salt stress were detected on chromosomes 1, 6 and 7, respectively, and explained 13.9% to 18.0% of the total phenotypic variance. Based on the correlations between SDSs and other physiological traits, it was considered that damage of leaves was attributed to accumulation of Na+ in the shoot by transport of Na+ from the root to the shoot in external high concentration. We found eight QTLs including three for three traits of the shoots, and five for four traits of the roots at five chromosomal regions, controlled complex physiological traits related to rice salt-tolerance under salt stress. Of these QTLs, the two major QTLs with the very large effect, qSNC-7 for shoot Na+ concentration and qSKC-1 for shoot K+ concentration, explained 48.5% and 40.1% of the total phenotypic variance, respectively. The QTLs detected between the shoots and the roots almost did not share the same map locations, suggesting that the genes controlling the transport of Na+ and K+ between the shoots and the roots may be different.

Allelic variation at the VRN-1 promoter region in polyploid wheat.

Abstract: Vernalization, the requirement of a long exposure to low temperatures to induce flowering, is an essential adaptation of plants to cold winters. We have shown recently that the vernalization gene VRN-1 from diploid wheat Triticum monococcum is the meristem identity gene APETALA1, and that deletions in its promoter were associated with spring growth habit. In this study, we characterized the allelic variation at the VRN-1 promoter region in polyploid wheat. The Vrn-A1a allele has a duplication including the promoter region. Each copy has similar foldback elements inserted at the same location and is flanked by identical host direct duplications (HDD). This allele was found in more than half of the hexaploid varieties but not among the tetraploid lines analyzed here. The Vrn-A1b allele has two mutations in the HDD region and a 20-bp deletion in the 5′ UTR compared with the winter allele. The Vrn-A1b allele was found in both tetraploid and hexaploid accessions but at a relatively low frequency. Among the tetraploid wheat accessions, we found two additional alleles with 32 bp and 54 bp deletions that included the HDD region. We found no size polymorphisms in the promoter region among the winter wheat varieties. The dominant Vrn-A1 allele from two spring varieties from Afghanistan and Egypt (Vrn-A1c allele) and all the dominant Vrn-B1 and Vrn-D1 alleles included in this study showed no differences from their respective recessive alleles in promoter sequences. Based on these results, we concluded that the VRN-1 genes should have additional regulatory sites outside the promoter region studied here.

Development of a standard set of microsatellite reference alleles for identification of grape cultivars.

Abstract: In order to investigate the comparability of microsatellite profiles obtained in different laboratories, ten partners in seven countries analyzed 46 grape cultivars at six loci (VVMD5, VVMD7, VVMD27, VVS2, VrZAG62, and VrZAG79) No effort was made to standardize equipment or protocols Although some partners obtained very similar results, in other cases different absolute allele sizes and, sometimes, different relative allele sizes were obtained A strategy for data comparison by means of reference to the alleles detected in well-known cultivars was proposed For each marker, each allele was designated by a code based on the name of the reference cultivar carrying that allele Thirty-three cultivars, representing from 13 to 23 alleles per marker, were chosen as references After the raw data obtained by the different partners were coded, more than 97% of the data were in agreement Minor discrepancies were attributed to errors, suboptimal amplification and visualization, and misscoring of heterozygous versus homozygous allele pairs We have shown that coded microsatellite data produced in different laboratories with different protocols and conditions can be compared, and that it is suitable for the identification and SSR allele characterization of cultivars It is proposed that the six markers employed here, already widely used, be adopted as a minimal standard marker set for future grapevine cultivar analyses, and that additional cultivars be characterized by means of the coded reference alleles presented here The complete database is available at http://wwwgenresde/eccdb/vitis/ Cuttings of the 33 reference cultivars are available on request from the Institut National de la Recherche Agronomique Vassal collection (didiervares@ensaminrafr)

Efficient large-scale development of microsatellites for marker and mapping applications in Brassica crop species.

Abstract: A set of 398 simple sequence repeat markers (SSRs) have been developed and characterised for use with genetic studies of Brassica species. Small-insert (250-900 bp) genomic libraries from Brassica rapa, B. nigra, B. oleracea and B. napus, highly enriched for dinucleotide and trinucleotide SSR motifs, were constructed. Screening the clones with a mixture of oligonucleotide repeat probes revealed positive hybridisation to between 75% and 90% of the clones. Of these, 1,230 were sequenced. Primer pairs were designed for 398 SSR clones, and of these, 270 (67.8%) amplified a PCR product of the expected size in their focal and/or closely related species. A further screen of 138 primers pairs that produced a PCR product in B. napus germplasm found that 86 (62.3%) revealed length polymorphisms within at least one line of a test array representing the four Brassica species. The results of this screen were used to identify 56 SSRs and were combined with 41 SSRs that had previously shown polymorphism between the parents of a B. napus mapping population. These 97 SSR markers were mapped relative to a framework of RFLP markers and detected 136 loci over all 19 linkage groups of the oilseed rape genome.

QTL mapping of grain quality traits from the interspecific cross Oryza sativa × O. glaberrima

Abstract: International rice export markets are increasing demands for rapid improvements in grain quality characteristics. The African rice Oryza glaberrima is a new potential source of genes that will enhance the eating, cooking, and milling properties of the rice grain. The objective of this research was to identify and characterize quantitative trait loci (QTLs) among 312 doubled haploid lines derived from the BC3F1 of an interspecific cross of O. sativa × O. glaberrima. Genetic material was planted in replicated plots and evaluated for ten grain quality traits in 2001 in Colombia. A linkage map was constructed with 100 polymorphic microsatellite markers using the mapdisto software program to adjust for segregation distortion. Transgressive segregation was observed for all traits. Interval and composite interval analyses identified 27 QTLs for nine characters located on 11/12 chromosomes. The chromosomal positions of QTLs for percentage amylose, alkali-spreading score, and percentage protein were in agreement with data reported by others, whereas QTL markers for percentage head rice, percentage milled rice, percentage protein, and percentage brown rice were different in our mapping population. Five major QTLs were found to be associated with improved percentage rice bran, percentage amylose, and alkali-spreading score. Seven QTLs for improved percentage rice bran, percentage milled rice, alkali-spreading score, percentage protein, and grain length/width ratio were derived from the O. glaberrima accession. Three new QTLs for percentage rice bran are reported here for the first time. Results from this study suggest that the African rice might be a valuable new source for introgression and improvement of several traits that affect quality traits demanded by the different rice export markets.

Tall fescue EST-SSR markers with transferability across several grass species

Abstract: Tall fescue (Festuca arundinacea Schreb.) is a major cool season forage and turf grass in the temperate regions of the world. It is also a close relative of other important forage and turf grasses, including meadow fescue and the cultivated ryegrass species. Until now, no SSR markers have been developed from the tall fescue genome. We designed 157 EST-SSR primer pairs from tall fescue ESTs and tested them on 11 genotypes representing seven grass species. Nearly 92% of the primer pairs produced characteristic simple sequence repeat (SSR) bands in at least one species. A large proportion of the primer pairs produced clear reproducible bands in other grass species, with most success in the close taxonomic relatives of tall fescue. A high level of marker polymorphism was observed in the outcrossing species tall fescue and ryegrass (66%). The marker polymorphism in the self-pollinated species rice and wheat was low (43% and 38%, respectively). These SSR markers were useful in the evaluation of genetic relationships among the Festuca and Lolium species. Sequencing of selected PCR bands revealed that the nucleotide sequences of the forage grass genotypes were highly conserved. The two cereal species, particularly rice, had significantly different nucleotide sequences compared to the forage grasses. Our results indicate that the tall fescue EST-SSR markers are valuable genetic markers for the Festuca and Lolium genera. These are also potentially useful markers for comparative genomics among several grass species.

Development of PCR-based SNP markers for rice blast resistance genes at the Piz locus.

Abstract: We assessed the utility of single-nucleotide polymorphisms (SNPs) and small insertion/deletion polymorphisms (InDels) as DNA markers in genetic analysis and breeding of rice. Toward this end, we surveyed SNPs and InDels in the chromosomal region containing the Piz and Piz-t rice blast resistance genes and developed PCR-based markers for typing the SNPs. Analysis of sequences from a blast-susceptible Japanese cultivar and two cultivars each containing one of these genes revealed that SNPs are abundant in the Piz and Piz-t regions (on average, one SNP every 248 bp), but the number of InDels was much lower. The dense distribution of SNPs facilitated the generation of SNP markers in the vicinity of the genes. For typing these SNPs, we used a modified allele-specific PCR method. Of the 49 candidate allele-specific markers, 33 unambiguously and reproducibly discriminated between the two alleles. We used the markers for mapping the Piz and Piz-t genes and evaluating the size of DNA segments introgressed from the Piz donor cultivar in Japanese near-isogenic lines containing Piz. Our findings suggest that, because of its ability to generate numerous markers within a target region and its simplicity in assaying genotypes, SNP genotyping with allele-specific PCR is a valuable tool for gene mapping, map-based cloning, and marker-assisted selection in crops, especially rice.

QTL mapping of ten agronomic traits on the soybean ( Glycine max L. Merr.) genetic map and their association with EST markers.

Abstract: A set of 184 recombinant inbred lines (RILs) derived from soybean vars. Kefeng No.1 × Nannong 1138-2 was used to construct a genetic linkage map. The two parents exhibit contrasting characteristics for most of the traits that were mapped. Using restricted fragment length polymorphisms (RFLPs), simple sequence repeats (SSRs) and expressed sequence tags (ESTs), we mapped 452 markers onto 21 linkage groups and covered 3,595.9 cM of the soybean genome. All of the linkage groups except linkage group F were consistent with those of the consensus map of Cregan et al. (1999). Linkage group F was divided into two linkage groups, F1 and F2. The map consisted of 189 RFLPs, 219 SSRs, 40 ESTs, three R gene loci and one phenotype marker. Ten agronomic traits—days to flowering, days to maturity, plant height, number of nodes on main stem, lodging, number of pods per node, protein content, oil content, 100-seed weight, and plot yield—were studied. Using winqtlcart, we detected 63 quantitative trait loci (QTLs) that had LOD>3 for nine of the agronomic traits (only exception being seed oil content) and mapped these on 12 linkage groups. Most of the QTLs were clustered, especially on groups B1 and C2. Some QTLs were mapped to the same loci. This pleiotropism was common for most of the QTLs, and one QTL could influence at most five traits. Seven EST markers were found to be linked closely with or located at the same loci as the QTLs. EST marker GmKF059a, encoding a repressor protein and mapped on group C2, accounted for about 20% of the total variation of days to flowering, plant height, lodging and nodes on the main stem, respectively.

Medicago truncatula EST-SSRs reveal cross-species genetic markers for Medicago spp.

Abstract: Expressed sequence tags (ESTs) are important resources for gene discovery and molecular marker development. From over 147,000 ESTs of Medicago truncatula, we have identified 4,384 ESTs containing perfect simple sequence repeats (EST-SSR) of di-, tri-, tetra- or pentanucleotides. Six hundred sixteen primer pairs (PPs) were designed and screened over a panel of eight genotypes representing six Medicago spp. and subspecies. Nearly, 74% (455) of the PPs produced characteristic SSR bands of expected size length in at least one Medicago species. Four hundred six (89%) of these 455 PPs produced SSR bands in all eight genotypes tested. Only 17 PPs were M. truncatula -specific. High levels of polymorphism (>70%) were detected for these markers in alfalfa, M. truncatula, and other annual medics. About 48% of the reported markers are part of gene transcripts linked to putative functions. Our results indicate that the SSR markers developed from M. truncatula ESTs are valuable genetic markers for the Medicago genus. These markers will be useful in establishing the genomic relationships of M. truncatula to important forage legume crops such as alfalfa and other annual medics.

Quantitative trait locus analysis of fungal disease resistance factors on a molecular map of grapevine.

Abstract: A full-sibling F1 population comprising 153 individuals from the cross of ‘Regent’ × ‘Lemberger’ was employed to construct a genetic map based on 429 molecular markers. The newly-bred red grapevine variety ‘Regent’ has multiple field-resistance to fungal diseases inherited as polygenic traits, while ‘Lemberger’ is a traditional fungus-susceptible cultivar. The progeny segregate quantitatively for resistances to Plasmopara viticola and Uncinula necator, fungal pathogens that threaten viticulture in temperate areas. A double pseudo-testcross strategy was employed to construct the two parental maps under high statistical stringency for linkage to obtain a robust marker frame for subsequent quantitative trait locus (QTL) analysis. In total, 185 amplified fragment length polymorphism, 137 random amplified polymorphic DNA, 85 single sequence repeat and 22 sequence characterized amplified region or cleaved amplified polymorphic sequence markers were mapped. The maps were aligned by co-dominant or doubly heterozygous dominant anchor markers. Twelve pairs of homologous linkage groups could be integrated into consensus linkage groups. Resistance phenotypes and segregating characteristics were scored as quantitative traits in three or four growing seasons. Interval mapping reproducibly localized genetic factors that correlated with fungal disease resistances to specific regions on three linkage groups of the maternal ‘Regent’ map. A QTL for resistance to Uncinula necator was identified on linkage group 16, and QTLs for endurance to Plasmopara viticola on linkage groups 9 and 10 of ‘Regent’. Additional QTLs for the onset of berry ripening (“veraison”), berry size and axillary shoot growth were identified. Berry color segregated as a simple trait in this cross of two red varieties and was mapped as a morphological marker. Six markers derived from functional genes could be localized. This dissection of polygenic fungus disease resistance in grapevine allows the development of marker-assisted selection for breeding, the characterization of genetic resources and the isolation of the corresponding genes.

Genetic mapping and QTL analysis of fiber-related traits in cotton ( Gossypium )

Abstract: Cotton, the leading natural fiber crop, is largely produced by two primary cultivated allotetraploid species known as Upland or American cotton (Gossypium hirsutum L.) and Pima or Egyptian cotton (G. barbadense L.). The allotetraploid species diverged from each other and from their diploid progenitors (A or D genome) through selection and domestication after polyploidization. To analyze cotton AD genomes and dissect agronomic traits, we have developed a genetic map in an F2 population derived from interspecific hybrids between G. hirsutum L. cv. Acala-44 and G. barbadense L. cv. Pima S-7. A total of 392 genetic loci, including 333 amplified fragment length polymorphisms (AFLPs), 47 simple sequence repeats (SSRs), and 12 restriction fragment length polymorphisms (RFLPs), were mapped in 42 linkage groups, which span 3,287 cM and cover approximately 70% of the genome. Using chromosomal aneuploid interspecific hybrids and a set of 29 RFLP and SSR framework markers, we assigned 19 linkage groups involving 223 loci to 12 chromosomes. Comparing four pairs of homoeologous chromosomes, we found that with one exception linkage distances in the A-subgenome chromosomes were larger than those in their D-subgenome homoeologues, reflecting higher recombination frequencies and/or larger chromosomes in the A subgenome. Segregation distortion was observed in 30 out of 392 loci mapped in cotton. Moreover, approximately 29% of the RFLPs behaved as dominant loci, which may result from rapid genomic changes. The cotton genetic map was used for quantitative trait loci (QTL) analysis using composite interval mapping and permutation tests. We detected seven QTLs for six fiber-related traits; five of these were distributed among A-subgenome chromosomes, the genome donor of fiber traits. The detection of QTLs in both the A subgenome in this study and the D subgenome in a previous study suggests that fiber-related traits are controlled by the genes in homoeologous genomes, which are subjected to selection and domestication. Some chromosomes contain clusters of QTLs and presumably contribute to the large amount of phenotypic variation that is present for fiber-related traits.

Seed quality QTL in a prominent soybean population.

Abstract: Soybean [Glycine max (L.) Merr.] is a versatile crop due to its multitude of uses as a high protein meal and vegetable oil. Soybean seed traits such as seed protein and oil concentration and seed size are important quantitative traits. The objective of this study was to identify representative protein, oil, and seed size quantitative trait loci (QTL) in soybean. A recombinant inbred line (RIL) population consisting of 131 F6-derived lines was created from two prominent ancestors of North American soybeans (‘Essex’ and ‘Williams’) and the RILs were grown in six environments. One hundred simple sequence repeat (SSR) markers spaced throughout the genome were mapped in this population. There were a total of four protein, six oil, and seven seed size QTL found in this population. The QTL found in this study may assist breeders in marker-assisted selection (MAS) to retain current positive QTL in modern soybeans while simultaneously pyramiding additional QTL from new germplasm.

Full-genome analysis of resistance gene homologues in rice

Abstract: The availability of the rice genome sequence enabled the global characterization of nucleotide-binding site (NBS)-leucine-rich repeat (LRR) genes, the largest class of plant disease resistance genes. The rice genome carries approximately 500 NBS-LRR genes that are very similar to the non-Toll/interleukin-1 receptor homology region (TIR) class (class 2) genes of Arabidopsis but none that are homologous to the TIR class genes. Over 100 of these genes were predicted to be pseudogenes in the rice cultivar Nipponbare, but some of these are functional in other rice lines. Over 80 other NBS-encoding genes were identified that belonged to four different classes, only two of which are present in dicotyledonous plant sequences present in databases. Map positions of the identified genes show that these genes occur in clusters, many of which included members from distantly related groups. Members of phylogenetic subgroups of the class 2 NBS-LRR genes mapped to as many as ten different chromosomes. The patterns of duplication of the NBS-LRR genes indicate that they were duplicated by many independent genetic events that have occurred continuously through the expansion of the NBS-LRR superfamily and the evolution of the modern rice genome. Genetic events, such as inversions, that inhibit the ability of recently duplicated genes to recombine promote the divergence of their sequences by inhibiting concerted evolution.

A comparative analysis of genetic diversity in blackgram genotypes using RAPD and ISSR markers

Abstract: Random amplified polymorphic DNA (RAPD) and inter-simple sequence repeat (ISSR) markers were used to study the DNA polymorphism in elite blackgram genotypes. A total of 25 random and 16 ISSR primers were used. Amplification of genomic DNA of the 18 genotypes, using RAPD analysis, yielded 104 fragments that could be scored, of which 44 were polymorphic, with an average of 1.8 polymorphic fragments per primer. Number of amplified fragments with random primers ranged from two (OPA-13) to nine (OPK-4) and varied in size from 200 bp to 2,500 bp. Percentage polymorphism ranged from 16.6% (OPK-7) to a maximum of 66.6% (OPE-5, OPH-2, and OPK-8), with an average of 42.7%. The 16 ISSR primers used in the study produced 101 bands across 18 genotypes, of which 55 were polymorphic. The number of amplified bands varied from two (ISSR 858) to ten (ISSR 810), with a size range of 200-2,200 bp. The average numbers of bands per primer and polymorphic bands per primer were 6.3 and 3.4, respectively. Percentage polymorphism ranged from 25% (ISSR 885) to 100% (ISSR 858), with an average percentage polymorphism of 57.5% across all the genotypes. The 3'-anchored primers based on poly(GA) and poly(AG) motifs produced high average polymorphisms of 54.98% and 58.32%, respectively. ISSR markers were more efficient than the RAPD assay, as they detected 57.4% polymorphic DNA markers in Vigna mungo as compared to 42.7% for RAPD markers. The Mantel test between the two Jaccard's similarity matrices gave r=0.32, showing low correlation between RAPD- and ISSR-based similarities. Clustering of genotypes within groups was not similar when RAPD and ISSR derived dendrogram were compared, whereas the pattern of clustering of the genotypes remained more or less the same in ISSR and combined data of RAPD and ISSR.

Advanced backcross QTL analysis in progenies derived from a cross between a German elite winter wheat variety and a synthetic wheat (Triticum aestivum L.).

Abstract: We report here the second advanced backcross quantitative trait locus (AB-QTL) analysis carried out in winter wheat. Seven agronomic traits were studied in a BC2F1population derived from a cross between the German winter wheat variety Flair and the synthetic wheat line XX86 developed in Japan. We selected 111 BC2F1 lines and genotyped these with 197 microsatellite markers. Field data for seven agronomic traits were collected from corresponding BC2F3 families that were grown at up to six locations in Germany. QTL analyses for yield and yield components were performed using single-marker regression and interval mapping. A total of 57 putative QTLs derived from XX86 were detected, of which 24 (42.1%) were found to have a positive effect from the synthetic wheat XX86. These favourable QTLs were mainly associated with thousand-grain weight and grain weight per ear. Many QTLs for correlated traits were mapped in similar chromosomal regions. The AB-QTL data obtained in the present study are discussed and compared with results from previous QTL analyses.

Mapping of quantitative trait loci controlling low-temperature germinability in rice (Oryza sativa L.).

Abstract: Low-temperature germination is one of the major determinants for stable stand establishment in the direct seeding method in temperate regions, and at high altitudes of tropical regions. Quantitative trait loci (QTLs) controlling low-temperature germinability in rice were identified using 122 backcross inbred lines (BILs) derived from a cross between temperate japonica varieties, Italica Livorno and Hayamasari. The germination rate at 15°C was measured to represent low-temperature germination and used for QTL analysis. The germination rate at 15°C for 7 days of Italica Livorno and Hayamasari was 98.7 and 26.8%, respectively, and that of BILs ranged from 0 to 83.3%. Using restriction fragment length polymorphism (RFLP) and simple sequence repeat (SSR) markers, we constructed a linkage map which corresponded to about 90% of the rice genome. Three putative QTLs associated with low-temperature germination were detected. The most effective QTL, qLTG-3-1 on chromosome 3, accounted for 35.0% of the total phenotypic variation for low-temperature germinability. Two additional QTLs, qLTG-3-2 on chromosome 3 and qLTG-4 on chromosome 4, were detected and accounted for 17.4 and 5.5% of the total phenotypic variation, respectively. The Italica Livorno alleles in all detected QTLs increased the low-temperature germination rate.

Molecular mapping of resistance to Fusarium head blight in the spring wheat cultivar Frontana.

Abstract: Fusarium head blight (FHB) is a destructive disease of wheat. The objective of this study was to characterise the FHB resistance of the Brazilian spring wheat cultivar Frontana through molecular mapping. A population of 210 doubled-haploid lines from a cross of Frontana (partially resistant) and Remus (susceptible) was evaluated for FHB resistance during three seasons. Spray and single-spikelet inoculations were applied. The severity, incidence and spread of the disease were assessed by visual scoring. The population was genotyped with 566 DNA markers. The major QTL effect associated with FHB resistance mapped to chromosome 3A near the centromere, explaining 16% of the phenotypic variation for disease severity over 3 years. The most likely position is in the Xgwm720–Xdupw227 interval. The genomic region on 3A was significantly associated with FHB severity and incidence in all years evaluated, but not with FHB spread, indicating the prominent contribution of this QTL to resistance against initial infection. The map interval Xgwm129–Xbarc197 on chromosome 5A also showed consistent association with FHB severity and accounted for 9% of the phenotypic variation. In addition, smaller effects for FHB severity were identified on chromosomes 1B, 2A, 2B, 4B, 5A and 6B in single years. Individual QTLs for resistance to FHB spread accounted for less than 10% of the variation in trait expression. The present study indicates that FHB resistance of Frontana primarily inhibits fungal penetration (type I resistance), but has a minor effect on fungal spread after infection (type II resistance).

Positional cloning of the rice Rf-1 gene, a restorer of BT-type cytoplasmic male sterility that encodes a mitochondria-targeting PPR protein.

Abstract: The combination of cytoplasmic male sterility (CMS) in one parent and a restorer gene (Rf) to restore fertility in another are indispensable for the development of hybrid varieties. We have found a rice Rf-1 gene that restores BT-type CMS by applying a positional cloning strategy. Using linkage analysis in combination with 6,104 BC1F3 progeny derived from a cross between two near-isogenic lines (NILs) differing only at the Rf-1 locus, we delimited the Rf-1 gene to a 22.4-kb region in the rice genome. Duplicate open reading frames (Rf-1A and Rf-1B) with a pentatricopeptide (PPR) motif were found in this region. Since several insertions and/or deletions were found in the regions corresponding to both the Rf-1A and Rf-1B genes in the maintainer’s allele, they may have lost their function. Rf-1A protein had a mitochondria-targeting signal, whereas Rf-1B did not. The Rf-1B gene encoded a shorter polypeptide that was determined by a premature stop codon. Based on the function of the Rf-1 gene, its product is expected to target mitochondria and may process the transcript from an atp6/orf79 region in the mitochondrial genome. Since the Rf-1A gene encodes a 791-amino acid protein with a signal targeting mitochondria and has 16 repeats of the PPR motif, we concluded that Rf-1A is the Rf-1 gene. Nine duplications of Rf-1A homologs were found around the Rf-1 locus in the Nipponbare genome. However, while some of them encoded proteins with the PPR motif, they do not restore BT-type CMS based on the lack of co-segregation with the restoration phenotype. These duplicates may have played diversified roles in RNA processing and/or recombination in mitochondria during the co-evolution of these genes and the mitochondrial genome.

Molecular diversity in French bread wheat accessions related to temporal trends and breeding programmes.

Abstract: A set of 41 wheat microsatellite markers (WMS), giving 42 polymorphic loci (two loci on each chromosome), was used to describe genetic diversity in a sample of 559 French bread wheat accessions (landraces and registered varieties) cultivated between 1800 and 2000. A total of 609 alleles were detected. Allele number per locus ranged from 3 to 28, with a mean allele number of 14.5. On the average, about 72% of the total number of alleles were observed with a frequency of less than 5% and were considered to be rare alleles. WMS markers used showed different levels of gene diversity: the highest PIC value occurred in the B genome (0.686) compared to 0.641 and 0.659 for the A and D genomes, respectively. When comparing landraces with registered varieties gathered in seven temporal groups, a cluster analysis based on an F st matrix provided a clear separation of landraces from the seven variety groups, while a shift was observed between varieties registered before and after 1970. There was a decrease of about 25% in allelic richness between landraces and varieties. In contrast, when considering only registered varieties, changes in diversity related to temporal trends appeared more qualitative than quantitative, except at the end of the 1960s, when a bottleneck might have occurred. New varieties appear to be increasingly similar to each other in relation to allelic composition, while differences between landraces are more and more pronounced over time. Finally, considering a sub-sample of 193 varieties representative of breeding material selected during the twentieth century by the six most important plant breeding companies, few differences in diversity were observed between the different breeding programmes. The observed structure of diversity in French bread wheat collections is discussed in terms of consequences, both for plant breeders and for managers of crop genetic resources.

Wide coverage of the tetraploid cotton genome using newly developed microsatellite markers.

Abstract: Microsatellite [simple-sequence repeat (SSR)] markers were developed and positioned on the genetic map of tetraploid cotton. Three hundred and ninety-two unique microsatellite sequences, all but two containing a (CA/GT) repeat, were isolated, and the deduced primers were used to screen for polymorphism between the Gossypium hirsutum and G. barbadense parents of the mapping population analyzed in our laboratory. The observed rate of polymorphism was 56%. The 204 polymorphic SSRs revealed 261 segregating bands, which ultimately gave rise to 233 mapped loci. The updated status of our genetic map is now of 1,160 loci and 5,519 cM, with an average distance between two loci of 4.8 cM. The presence of a total of 466 microsatellite loci, with an average distance of 12 cM between two SSR loci, now provides wide coverage of the genome of tetraploid cotton and thus represents a powerful means for the production of a consensus map and for the effective tracking of QTLs.

Microsatellite identification and characterization in peanut (A. hypogaea L.)

Abstract: A major constraint to the application of biotechnology to the improvement of the allotetraploid peanut, or groundnut (Arachis hypogaea L.), has been the paucity of polymorphism among germplasm lines using biochemical (seed proteins, isozymes) and DNA markers (RFLPs and RAPDs). Six sequence-tagged microsatellite (STMS) markers were previously available that revealed polymorphism in cultivated peanut. Here, we identify and characterize 110 STMS markers that reveal genetic variation in a diverse array of 24 peanut landraces. The simple-sequence repeats (SSRs) were identified with a probe of two 27,648-clone genomic libraries: one constructed using PstI and the other using Sau3AI/BamHI. The most frequent, repeat motifs identified were ATT and GA, which represented 29% and 28%, respectively, of all SSRs identified. These were followed by AT, CTT, and GT. Of the amplifiable primers, 81% of ATT and 70.8% of GA repeats were polymorphic in the cultivated peanut test array. The repeat motif AT showed the maximum number of alleles per locus (5.7). Motifs ATT, GT, and GA had a mean number of alleles per locus of 4.8, 3.8, and 3.6, respectively. The high mean number of alleles per polymorphic locus, combined with their relative frequency in the genome and amenability to probing, make ATT and GA the most useful and appropriate motifs to target to generate further SSR markers for peanut.

Two loci on chromosome 5H determine low-temperature tolerance in a 'Nure' (winter) x 'Tremois' (spring) barley map.

Abstract: Barley (Hordeum vulgare subsp. vulgare) is an economically important diploid model for the Triticeae; and a better understanding of low-temperature tolerance mechanisms could significantly improve the yield of fall-sown cereals. We developed a new resource for genetic analysis of winter hardiness-related traits, the ‘Nure’ × ‘Tremois’ linkage map, based on a doubled-haploid population that is segregating for low-temperature tolerance and vernalization requirement. Three measures of low-temperature tolerance and one measure of vernalization requirement were used and, for all traits, QTLs were mapped on chromosome 5H. The vernalization response QTL coincides with previous reports at the Vrn-1/Fr1 region of the Triticeae. We also found coincident QTLs at this position for all measures of low-temperature tolerance. Using Composite Interval Mapping, a second proximal set, of coincident QTLs for low-temperature tolerance, and the accumulation of two different COR proteins (COR14b and TMC-Ap3) was identified. The HvCBF4 locus, or another member of the CBF loci clustered in this region, is the candidate gene underlying this QTL. There is a CRT/DRE recognition site in the promoter of cor14b with which a CBF protein could interact. These results support the hypothesis that highly conserved regulatory factors, such as members of the CBF gene family, may regulate the stress responses of a wide range of plant species.

Genetic analysis of Indian aromatic and quality rice (Oryza sativa L.) germplasm using panels of fluorescently-labeled microsatellite markers.

Abstract: Genetic relationships among Indian aromatic and quality rice (Oryza sativa) germplasm were assessed using 30 fluorescently labeled rice microsatellite markers. The 69 rice genotypes used in this study included 52 Basmati and other scented/quality rice varieties from different parts of India and 17 indica and japonica varieties that served as controls. A total of 235 alleles were detected at the 30 simple sequence repeat (SSR) loci, 62 (26.4%) of which were present only in Basmati and other scented/quality rice germplasm accessions. The number of alleles per locus ranged from 3 to 22, with an average of 7.8, polymorphism information content (PIC) values ranged from 0.2 to 0.9, with an average of 0.6, and the size range between the smallest and the largest allele for a given microsatellite locus varied between 3 bp and 68 bp. Of the 30 SSR markers, 20 could distinguish traditional Basmati rice varieties, and a single panel of eight markers could be used to differentiate the premium traditional Basmati, cross-bred Basmati, and non-Basmati rice varieties having different commercial value in the marketplace. When estimates of inferred ancestry or similarity coefficients were used to cluster varieties, the high-quality Indian aromatic and quality rice genotypes could be distinguished from both indica and japonica cultivars, and crossbred varieties could be distinguished from traditional Basmati rices. The results indicate that Indian aromatic and quality germplasm is genetically distinct from other groups within O. sativa and is the product of a long, independent pattern of evolution. The data also suggest that there is scope for exploiting the genetic diversity of aromatic/quality rice germplasm available in India for national Basmati rice breeding programs.

Mapping 245 SSR markers on the Vitis vinifera genome: a tool for grape genetics

Abstract: The aim of the present work was to develop a microsatellite marker-based map of the Vitis vinifera genome (n=19), useful for genetic studies in this perennial heterozygous species, as SSR markers are highly transferable co-dominant markers. A total of 346 primer pairs were tested on the two parents (Syrah and Grenache) of a full sib population of 96 individuals (S × G population), successfully amplifying 310 markers. Of these, 88.4% markers were heterozygous for at least one of the two parents. A total of 292 primer pairs were then tested on Riesling, the parent of the RS1 population derived from selfing (96 individuals), successfully amplifying 299 markers among which 207 (62.9%) were heterozygous. Only 6.7% of the markers were homozygous in all three genotypes, stressing the interest of such markers in grape genetics. Four maps were constructed based on the segregation of 245 SSR markers in the two populations. The Syrah map was constructed from the segregations of 177 markers that could be ordered into 19 linkage groups (total length 1,172.2 cM). The Grenache map was constructed with the segregations of 178 markers that could be ordered into 18 linkage groups (total length 1,360.6 cM). The consensus S × G map was constructed with the segregations of 220 markers that were ordered into 19 linkage groups (total length 1,406.1 cM). One hundred and eleven markers were scored on the RS1 population, among them 27 that were not mapped using the S × G map. Out of these 111 markers, 110 allowed to us to construct a map of a total length of 1,191.7 cM. Using these four maps, the genome length of V. vinifera was estimated to be around 2,200 cM. The present work allowed us to map 123 new SSR markers on the V. vinifera genome that had not been ordered in a previous SSR-based map (Riaz et al. 2004), representing an average of 6.5 new markers per linkage group. Any new SSR marker mapped is of great potential usefulness for many applications such as the transfer of well-scattered markers to other maps for QTL detection, the use of markers in specific regions for the fine mapping of genes/QTL, or for the choice of markers for MAS.

Assignment of allelic configuration in polyploids using the MAC-PR (microsatellite DNA allele counting—peak ratios) method

Abstract: Polysomic inheritance frequently results in the simultaneous occurrence of several microsatellite DNA alleles on a single locus. The MAC-PR (microsatellite DNA allele counting—peak ratios) method was recently developed for the analysis of polyploid plants and makes use of the quantitative values for microsatellite allele peak areas. To date, this approach has only been used in plants with known genetic relationships. We report here the application of MAC-PR for the first time to random samples of unknown pedigrees. We analysed six microsatellite loci using a set of tetraploid ornamental rose (Rosa × hybrida L.) varieties. For each locus, all alleles were analysed in pairwise combinations in order to determine their copy number in the individual samples. This was accomplished by calculating the ratios between the peak areas for two alleles in all of the samples where these two alleles occurred together. The allele peak ratios observed were plotted in a histogram, and those histograms that produced at least two well-separated groups were selected for further analysis. Mean allelic peak ratio values for these groups were compared to the relationships expected between alleles in hypothetical configurations of the locus investigated. Using this approach, we were able to assign precise allelic configurations (the actual genotype) to almost all of the varieties analysed for five of the six loci investigated. MAC-PR also appears to be a very effective tool for detecting ‘null’ alleles in polyploid species.

Comparative analysis of seeded and vegetative biotype buffalograsses based on phylogenetic relationship using ISSRs, SSRs, RAPDs, and SRAPs.

Abstract: Buffalograss [Buchloe dactyloides (Nutt.) Englem.] is the only native grass that is being used extensively as a turfgrass in the Great Plains region. Its low-growth habit, drought resistance, and low-maintenance requirement make it attractive as a turfgrass species. Our objective was to obtain an overview on the genetic relatedness among and within seeded and vegetative biotype buffalograsses using inter-simple sequence repeats (ISSRs), random amplified polymorphic DNA (RAPDs), sequence-related amplified polymorphisms (SRAPs), and simple sequence repeats (SSRs) markers that were derived from related species (maize, pearl millet, sorghum, and sugarcane). Twenty individuals per cultivar were genotyped using 30 markers from each marker system. All buffalograss cultivars were uniquely fingerprinted by all four marker systems. Mean genetic similarities were estimated at 0.52, 0.51, 0.62, and 0.57 using SSRs, ISSRs, SRAPs, and RAPDs, respectively. Two main clusters separating the seeded-biotype from the vegetative-biotype cultivars were produced using UPGMA analysis. Further subgroupings were unequivocal. The Mantel test resulted in a very good fit (SRAP=0.92, ISSR=0.90) to good fit (RAPD=0.86, SSR=0.88) of cophenetic values. Comparing the four marker systems to each other, RAPD and SRAP similarity indices were highly correlated (r=0.73), while Spearman’s rank correlation coefficient between RAPDs and SSRs was r=0.24 and between ISSRs and SSRs was r=0.66. A genotype-assignment analytical approach might be useful for cultivar identification and property rights protection. Polymorphic SRAPs were abundant and demonstrated genetic diversity among closely related cultivars.

Transferability of SSR markers among wheat, rye, and triticale.

Abstract: Simple sequence repeat (SSR) markers are a valuable tool for many purposes, such as mapping, fingerprinting, and breeding However, they are only available in some economically important crops because of the high cost and labor intensity involved in their development Comparative mapping reveals a high degree of colinearity between closely related species, which allows the exchange of markers between them Our objective was to examine the transferability of SSR markers among wheat (Triticum aestivum L), rye (Secale cereale L), and triticale (X Triticosecale Wittmack) One hundred forty-eight wheat and 28 rye SSR markers were used to amplify genomic DNA extracted from five lines each of wheat, rye, and triticale Transferability of wheat SSR markers to rye was 17%, whereas 25% of rye markers were amplifiable in wheat In triticale, 58% and 39% transferability was achieved for wheat and rye markers, respectively Wheat markers gave an average of 26, 27, and 24 polymorphic bands in wheat, rye, and triticale, respectively, while rye markers gave an average of 20 in rye and none in wheat and triticale These transferable markers can now be exploited for further genetic and breeding studies in these species

Molecular characterization of Buffalograss germplasm using sequence-related amplified polymorphism markers.

Abstract: Buffalograss [Buchloe dactyloides (Nutt.) Englem] germplasm has a broad resource of genetic diversity that can be used for turfgrass, forage and conservation. Buffalograss is the only native grass that is presently used as a turfgrass in the Great Plains region of North America. Its low growth habit, drought tolerance and reduced requirement for fertilizer and pesticides contribute to interest in its use. The objectives of this study were to use sequence-related amplified polymorphism (SRAP) markers in the evaluation of genetic diversity and phenetic relationships in a diverse collection of 53 buffalograss germplasms, and to identify buffalograss ploidy levels using flow cytometry. Based on their DNA contents, buffalograss genotypes were grouped into four sets, corresponding to their ploidy levels. Thirty-four SRAP primer combinations were used. This is the first report of the detection of differentiating diploid, tetraploid, pentaploid and hexaploid buffalograss genotypes, representing diverse locations of origin, using SRAP markers. Cluster analysis by the unweighted pair-group method with arithmetic averages based on genetic similarity matrices indicated that there were eight clusters. The coefficients of genetic distance among the genotypes ranged from 0.33 up to 0.99 and averaged D=0.66. The genetic diversity estimate, He, averaged 0.35. These results demonstrated that genotypes with potential traits for turfgrass improvement could readily be distinguished, based on SRAP. The use of PCR-based technologies such as SRAP is an effective tool for estimating genetic diversity, identifying unique genotypes as new sources of alleles for enhancing turf characteristics, and for analyzing the evolutionary and historical development of cultivars at the genomic level in a buffalograss breeding program.