An Ultralow Loss Inductorless $dv/dt$ Filter Concept for Medium-Power Voltage Source Motor Drive Converters With SiC Devices

TLDR: In this paper, the authors proposed a filter model for the selection of filter component values for a certain $dv/dt$ requirement, where the stray inductance between the power device and the converter output was used as a filter component in combination with an RC-link.

Abstract: In this paper, a novel $dv/dt$ filter is presented targeted for 100-kW to 1-MW voltage source converters using silicon carbide (SiC) power devices. This concept uses the stray inductance between the power device and the converter output as a filter component in combination with an additional small RC -link. Hence, a lossy, bulky, and costly filter inductor is avoided and the resulting output $dv/dt$ is limited to 5–10 kV/ $\mu$ s independent of the output current and switching speed of the SiC devices. As a consequence, loads with $dv/dt$ constraints, e.g., motor drives can be fed from SiC devices enabling full utilization of their high switching speed. Moreover, a filter-model is proposed for the selection of filter component values for a certain $dv/dt$ requirement. Finally, results are shown using a 300-A 1700-V SiC metal–oxide–semiconductor field-effect transistor ( mosfet ). These results show that the converter output $dv/dt$ can be limited to 7.5 kV/ $\mu$ s even though values up to 47 kV/ $\mu$ s were measured across the SiC mosfet module. Hence, the total switching losses, including the filter losses, are verified to be three times lower compared to when the mosfet $dv/dt$ was slowed down by adjusting the gate driver.