scispace - formally typeset
Proceedings ArticleDOI

Analysis, modeling, design and implementation of average current mode control for interleaved boost converter

TLDR
Small signal modeling approach is used to develop an analytical model for average current-mode controlled interleaved boost converter and the experimental results are presented to evaluate the derived model and performance of designed controller.
Abstract
In high power applications, parallel operation of boost converters is recommended. These paralleled boost converters can be operated in interleaved mode. Interleaved mode of operation improves the steady state and dynamic performance of the system. In this work, small signal modeling approach is used to develop an analytical model for average current-mode controlled interleaved boost converter. The controller is designed and implemented for a 500 W interleaved boost converter prototype. The experimental results are presented to evaluate the derived model and performance of designed controller.

read more

Citations
More filters
Journal ArticleDOI

Design and Analysis of Novel Control Strategy for Battery and Supercapacitor Storage System

TL;DR: In this paper, a simple novel control strategy is designed and analyzed for a hybrid energy storage system (HESS), where batteries are used to balance the slow changing power surges, whereas super-capacitors (SC) are used by diverting the power surges to the SC system.
Journal ArticleDOI

DC Grid Voltage Regulation Using New HESS Control Strategy

TL;DR: In this article, a new control scheme is proposed to control the power sharing between batteries and supercapacitors to match the generation-demand mismatch and regulate the grid voltage, which not only improves the dc grid voltage regulation capability but also reduces the stress levels on the battery and hence increases the life span of the battery.
Journal ArticleDOI

Power management and control of a grid-independent DC microgrid with hybrid energy storage system

TL;DR: The proposed compensation for PI controller managed hybrid energy storage systems (HESSs) provides for improved DC bus regulation with minimal battery stress levels and redirections of unwaged battery currents to SCs for fast compensations in the proposed PMS enhances battery life span.
Journal ArticleDOI

A Comprehensive Analysis for High-Power Density, High-Efficiency 60 kW Interleaved Boost Converter Design for Electrified Powertrains

TL;DR: In order to achieve a fast and accurate analysis and design, a generalized method is developed for the calculations of required phase inductance and output capacitance and a genetic algorithm (GA) optimization method is implemented for the inductor design.
Journal ArticleDOI

An interleaved step-up/step-down converter for fuel cell vehicle applications

TL;DR: A step-up/step-down converter for fuel cell vehicle applications, which effectively operates in step- up or step-down mode when the fuel cell voltage is lower or higher than the output voltage of high-voltage direct current bus, is proposed in this paper.
References
More filters
Journal ArticleDOI

Open-loop power-stage transfer functions relevant to current-mode control of boost PWM converter operating in CCM

TL;DR: This paper presents the analysis of open-loop power-stage dynamics relevant to current-mode control for a boost pulsewidth-modulated (PWM) dc-dc converter operating in continuous-conduction mode (CCM).
Journal ArticleDOI

A Current-Controlled Tristate Boost Converter With Improved Performance Through RHP Zero Elimination

TL;DR: In this paper, a novel current mode control scheme for the tristate boost converter circuit is proposed, which eliminates the zero in the right-half plane (RHP) and improves the dynamic performance.
Journal ArticleDOI

Robust average current-mode control of multimodule parallel DC-DC PWM converter systems with improved dynamic response

TL;DR: This paper presents a novel average current-mode control (ACC) strategy for the control of multimodule parallel pulsewidth modulation DC-DC converters, which represents a drastic improvement over conventional ACC.
Journal ArticleDOI

Technique for sensing inductor and DC output currents of PWM DC-DC converter

TL;DR: In this article, the authors proposed a method to sense and add appropriately the currents in the transistor, rectifier and capacitors of a PWM converter using current transformers, which can reconstruct the waveforms of inductor and DC output currents accurately while maintaining isolation.
Journal ArticleDOI

Time-Multiplexing Current Balance Interleaved Current-Mode Boost DC-DC Converter for Alleviating the Effects of Right-half-plane Zero

TL;DR: In this article, a time-multiplexing current balance (TMCB) current-mode boost converter is proposed to improve the transient performance of a conventional boost converter, which requires an extra inductor and a slight increase in the size of the printed circuit board layout and die size.
Related Papers (5)