scispace - formally typeset
Journal ArticleDOI

Ignition delay, combustion and emission characteristics of diesel engine fueled with biodiesel

TLDR
In this article, the authors present a literature review on ignition delay (ID), combustion and emission characteristics of biodiesel fueled diesel engine and report that the combustion characteristics of bio-fueled engine is slightly different from the engine running with petroleum diesel.
Abstract
Biodiesels are gaining more importance as a promising alternative energy resource. Engine performance and emission characteristics of unmodified biodiesel fueled diesel engines are highly influenced by its ignition and combustion behavior. This review article presents the literature review on ignition delay (ID), combustion and emission characteristics of biodiesel fueled diesel engine. More than hundred articles report which have been published mostly in the last decade are reviewed in this paper. The investigation results report that the combustion characteristics of bio fueled engine is slightly different from the engine running with petroleum diesel. Most of the investigation results have reported that as compared to diesel, biodiesel has early start of combustion (SOC) and shorter ID of between 1–5° and 0.25–1.0°, respectively. Higher cetane number (CN), lower compressibility and fatty acid composition of biodiesel have been identified as the main elements for early SOC and shorter ID. In addition, it is also found that, the heat release rate (HRR) of biodiesel is slightly lower than diesel owing to the lower calorific value, lower volatility, shorter ID and higher viscosity.

read more

Citations
More filters
Book

Atomization and Sprays

TL;DR: In this paper, the basic processes in Atomization are discussed, and the drop size distributions of sprays are discussed.Preface 1.General Considerations 2.Basic Processes of Atomization 3.Drop Size Distributions of Sprays 4.Atomizers 5.Flow in Atomizers 6.AtOMizer Performance 7.External Spray Charcteristics 8.Drop Evaporation 9.Drop Sizing Methods Index
Journal ArticleDOI

A review on feedstocks, production processes, and yield for different generations of biodiesel

TL;DR: In this article, a comprehensive assessment of various feedstocks used for different generation biodiesel production with their advantages and disadvantages are also explained, and different production methods for biodiesel with yield calculation is also explained.
Journal ArticleDOI

Impacts of biodiesel combustion on NOx emissions and their reduction approaches

TL;DR: In this paper, the impacts of biodiesel combustion on NOx emissions and their reduction approaches in diesel engines are reviewed and the results of reduction approaches of the NOx emission implies, exhaust gas recirculation (EGR) and retarded injection timing are effective as well as low cost techniques than others.
Journal ArticleDOI

Impacts of additives on performance and emission characteristics of diesel engines during steady state operation

TL;DR: In this paper, the effects of biodiesel/diesel additives on the performance and emissions of diesel engines were comprehensively reviewed throughout this article, and the opportunities and limitations of each additive considering both engine performance and combustion benignity were outlined to guide future research and development in the domain.
Journal ArticleDOI

A study on the effects of promising edible and non-edible biodiesel feedstocks on engine performance and emissions production: A comparative evaluation

TL;DR: In this paper, a comprehensive review on the impact of potential biodiesel feedstocks (edible and non-edible) on engine performance and exhaust emissions including details of engine and operating condition is presented.
References
More filters
Journal ArticleDOI

Dependence of biodiesel fuel properties on the structure of fatty acid alkyl esters

TL;DR: In this paper, structural features that influence the physical and fuel properties of a fatty ester molecule are chain length, degree of unsaturation, and branching of the chain, as well as the structural features of the fatty acid and the alcohol moieties.
Journal ArticleDOI

Combustion of fat and vegetable oil derived fuels in diesel engines

TL;DR: In this paper, the status of fat and oil derived diesel fuels with respect to fuel properties, engine performance, and emissions is reviewed, and it is concluded that the price of the feedstock fat or oil is the major factor determining biodiesel price.
Journal ArticleDOI

Effect of biodiesel fuels on diesel engine emissions

TL;DR: In this article, the authors collected and analyzed the body of work written mainly in scientific journals about diesel engine emissions when using biodiesel fuels as opposed to conventional diesel fuels, focusing on the most concerning emissions: nitric oxides and particulate matter.
Journal ArticleDOI

Review of biodiesel composition, properties, and specifications

TL;DR: In this paper, the fatty acid (FA) profiles of 12 common biodiesel feedstocks were summarized, and it was shown that several fuel properties, including viscosity, specific gravity, cetane number, iodine value, and low temperature performance metrics are highly correlated with the average unsaturation of the FA profiles.
Book

Atomization and Sprays

TL;DR: In this paper, the basic processes in Atomization are discussed, and the drop size distributions of sprays are discussed.Preface 1.General Considerations 2.Basic Processes of Atomization 3.Drop Size Distributions of Sprays 4.Atomizers 5.Flow in Atomizers 6.AtOMizer Performance 7.External Spray Charcteristics 8.Drop Evaporation 9.Drop Sizing Methods Index
Related Papers (5)
Trending Questions (1)
Is the Toyota Mirai a combustion engine?

The investigation results report that the combustion characteristics of bio fueled engine is slightly different from the engine running with petroleum diesel.