Journal ArticleDOI
Investigation of heat transfer and exergy loss in a concentric double pipe exchanger equipped with swirl generators
Ebru Kavak Akpinar,Yaşar Biçer +1 more
Reads0
Chats0
TLDR
In this article, the effect on heat transfer rates, friction factor and exergy loss of swirl generators with holes for the entrance of fluid were investigated by placing them at the entrance section of inner pipe of heat exchanger.About:
This article is published in International Journal of Thermal Sciences.The article was published on 2005-06-01. It has received 62 citations till now. The article focuses on the topics: Nusselt number & Heat exchanger.read more
Citations
More filters
Journal ArticleDOI
A comprehensive review on double pipe heat exchangers
TL;DR: In this paper, a review of double pipe heat exchanger has been presented, where the development procedure and heat transfer enhancement methods in aforementioned heat exchangers have been analyzed in details and correlations of mostly Nusselt number and pressure drop coefficient are also presented.
Journal ArticleDOI
Heat transfer—A review of 2005 literature
Richard J Goldstein,W. E. Ibele,Suhas V. Patankar,Terrence W. Simon,Thomas H. Kuehn,Paul J Strykowski,Kumar K. Tamma,Joachim Heberlein,Jane H. Davidson,John C. Bischof,Francis A Kulacki,Uwe Kortshagen,Sean C. Garrick,Vinod Srinivasan,Kalyanjit Ghosh,Rajat Mittal +15 more
TL;DR: A review of the heat transfer literature published in 2005 can be found in this article, where the authors restrict themselves to papers published in English through a peer-review process, with selected translations from journals published in other languages.
Journal ArticleDOI
Numerical investigation and optimization of heat transfer and exergy loss in shell and helical tube heat exchanger
TL;DR: In this article, a numerical model of shell and helical tube heat exchanger is investigated to assess heat transfer coefficient and exergy loss, and four design parameters including pitch coil, tube diameter, hot and cold flow rate, which are more significant for the heat exchange performance, were taken to consideration.
Journal ArticleDOI
Evaluation of heat transfer and exergy loss in a concentric double pipe exchanger equipped with helical wires
TL;DR: In this paper, the effects on heat transfer, friction factor and dimensionless exergy loss were investigated experimentally by mounting helical (spring shaped) wires of different pitch in the inner pipe in a double pipe heat exchanger.
Journal ArticleDOI
Effectiveness-NTU analyses in a double tube heat exchanger equipped with wavy strip considering various angles
Saman Pourahmad,S.M. Pesteei +1 more
TL;DR: In this paper, the effectiveness and number of heat transfer units (NTU) of a double tube heat exchanger equipped with wavy strip considering various angles were experimentally studied.
References
More filters
Book
Experimental methods for engineers
TL;DR: In this paper, the authors present basic concepts and analysis of experimental data for basic electrical measurements and sensors, including Displacement and Area Measurements, Pressure Measurement, Flow Measurement and Temperature Measurement.
Book
Advanced Engineering Thermodynamics
TL;DR: The First Law of Thermodynamics and the Second Law of Exergy were combined in this paper to describe the destruction of exergy in single-phase and multi-phase systems.
Book
Heat Transfer: A Practical Approach
TL;DR: In this article, the basic concepts of thermodynamics and heat transfer heat conduction are discussed, and numerical methods in heat transfer forced convection natural convection boiling and condensation radiation heat-transfer heat exchangers mass transfer.
Journal ArticleDOI
The role of exergy in energy policy making
TL;DR: In this paper, the utilization of exergy as an efficient tool for energy policy making applications is discussed, since exergy is a measure of quantity and quality of the energy sources unlike energy which is only about the quantity.
Journal ArticleDOI
Single layer drying behaviour of potato slices in a convective cyclone dryer and mathematical modeling
TL;DR: In this article, the authors investigated the single layer drying behavior of potato slices experimentally in a convective cyclone dryer and also to perform mathematical modeling by using single-layer drying models in the literature.