scispace - formally typeset
Journal ArticleDOI

Photocatalytic reduction of Cr(VI) over TiO2-coated cellulose acetate monolithic structures using solar light

Reads0
Chats0
TLDR
In this article, a tubular photoreactor packed with cellulose acetate monolithic (CAM) structures coated with TiO2-P25 thin films by a simple dip coating method and irradiated by simulated or natural solar light was used for the photoreduction of Cr(VI) to Cr(III), using citric acid as a hole scavenger.
Abstract
The major drawback of TiO2 based advanced oxidation processes (AOPs) is the use of massive amounts of dispersed nanoparticles that are hard to recover after the water treatment and potentially harmful for humans due to their very small size. The stabilization of the nanoparticles in an adequate inert support is a good strategy to overcome such limitations. In the present work, the photoreduction of Cr(VI) to Cr(III), using citric acid as a hole scavenger, was performed in a tubular photoreactor packed with cellulose acetate monolithic (CAM) structures coated with TiO2-P25 thin films by a simple dip coating method and irradiated by simulated or natural solar light. Firstly, the effect of TiO2 coating layers number on the Cr(VI) photoreduction was analysed. At the optimal amount, the photoreactor provides 0.10 g of TiO2 per liter of liquid inside the reactor. The support geometry allowed a high surface-area-to-volume ratio, offering an illuminated catalyst surface area per unit of volume inside the reactor of 212 m2 m−3. Following, operating conditions such as pH value, citric acid concentration, irradiation source and initial Cr(VI) concentration were analysed. Several organic species were also tested as hole scavengers. Results indicate reduction rates of 0.07 mmolCr(VI) m−3illuminatedvolume s−1 and a photonic efficiency of 1.9% during the reduction of 0.02 mM of Cr(VI) with 6 P25 layers and 6.9 mM of citric acid at pH 2.5 and 25 °C. Furthermore, the catalytic bed was reused for 10 consecutive cycles with almost no efficiency decrease after the second cycle, achieving near 100% Cr(VI) removal after 90 min.

read more

Citations
More filters
Journal ArticleDOI

Exceptional synergistic enhancement of the photocatalytic activity of SnS2 by coupling with polyaniline and N-doped reduced graphene oxide

TL;DR: In this article, the photocatalytic performance of visible-light-responsive, CdI2-type layered SnS2 by employing good conductivity N-doped reduced graphene oxide (NRG) and polyaniline (PANI) as the receptors and transporters of photogenerated electrons and holes, respectively, was investigated.
Journal ArticleDOI

Removal of chelated heavy metals from aqueous solution: A review of current methods and mechanisms

TL;DR: This review summarizes the various treatment methods applied to the removal of heavy metal complexes, with a summary of the mechanisms of action and recent research progress, and comprehensively analyzes future prospects and developments in methods for removal of chelated heavy metals.
Journal ArticleDOI

Efficient removal of chromium from water by Mn3O4@ZnO/Mn3O4 composite under simulated sunlight irradiation: Synergy of photocatalytic reduction and adsorption

TL;DR: In this paper, a novel Mn3O4@ZnO/Mn3O 4 composite was designed to remove Cr (VI) and Cr (III) from water by concurrent photocatalysis and adsorption.
Journal ArticleDOI

Constructing Cd0.5Zn0.5S@ZIF-8 nanocomposites through self-assembly strategy to enhance Cr(VI) photocatalytic reduction.

TL;DR: This study clearly demonstrates that the MOF-based composite nanomaterials hold great promises for applications in the field of environmental remediation and for design of novel photocatalytic materials.
Journal ArticleDOI

ZnO tetrapods and activated carbon based hybrid composite: Adsorbents for enhanced decontamination of hexavalent chromium from aqueous solution

TL;DR: In this paper, a tetrapodal ZnO was synthesized by flame transport synthesis (FTS) approach and activated carbon (AC) was successfully prepared from sugarcane bagasse with sodium hydroxide (NaOH) impregnation, followed by carbonization.
References
More filters
Journal ArticleDOI

An overview of semiconductor photocatalysis

TL;DR: An overview of the field of semiconductor photocatalysis can be found in this paper, where a brief examination of its roots, achievements and possible future is presented, and the semiconductor titanium dioxide (TiO 2 ) features predominantly in past and present work.
Journal ArticleDOI

Heterogeneous photocatalysis: Transition metal ions in photocatalytic systems

TL;DR: In this paper, the presence of transition metal ions in photocatalytic reactions is reviewed according to two main approaches: (a) the influence of metal ions on the rate of photocatalysis and (b) the transformation of the ions to less toxic species or their deposition on the semiconductor catalyst surface for recovery of expensive and useful metals.
Journal ArticleDOI

Photocatalytic reduction of Cr(VI) in aqueous solutions by UV irradiation with the presence of titanium dioxide.

TL;DR: The reduction of Cr(VI) in aqueous solution by UV/TiO2 reduction process was studied under various solution pH values, TiO2 dosages, light intensities, dissolved oxygen levels and other operating conditions to determine the reduction rates by photocatalytic-induced elections.
Journal ArticleDOI

Removal of toxic metal ions from wastewater by semiconductor photocatalysis

TL;DR: In this paper, physical adsorption and photocatalytic reduction of eight environmentally significant metal ions in TiO2 suspensions of Degussa P25 and Hombikat UV100 were investigated.
Journal ArticleDOI

A review of intensification of photocatalytic processes

TL;DR: In this paper, an overview of recent advances in the design and application of novel reactors and devices is presented, focusing on the introduction of a multitude of micro- or even nanoscale light emitting sources close to the catalyst particles.
Related Papers (5)