Open AccessBook
Steels, Microstructure and Properties
TLDR
In this article, the authors studied the effects of alloying elements in iron-carbon alloys and the formation of martensite, bainite reaction and acicular ferrite reaction.Abstract:
Iron and its interstitial solid solutions * The strengthening of iron and its alloys * The iron-carbon equilibrium diagram and plain carbon steels * The effects of alloying elements in iron-carbon alloys * Formation of martensite * The bainite reaction * Acicular ferrite * The heat treatment of steels - hardenability * The tempering of martensite * Commercial Steels: New material to include Nanostructured Steels, Steels for the Energy and Automobile Industries * The embrittlement and fracture of steels * Stainless steel * Weld microstructures * Modelling of microstructure and properties *read more
Citations
More filters
Journal ArticleDOI
Model many-body Stoner Hamiltonian for binary FeCr alloys
TL;DR: In this paper, a tight-binding many-body model Hamiltonian for a magnetic alloy can be derived from the comparison of its mean field solutions with other, more accurate, mean-field approximations, hence stimulating the development of large-scale computational algorithms for modeling radiation damage effects in magnetic alloys and steels.
Journal ArticleDOI
Phase Transformations of an Fe-0.85 C-17.9 Mn-7.1 Al Austenitic Steel After Quenching and Annealing
TL;DR: In this article, the phase transformations of an Fe-0.85 C-17.9 Mn-7.1 Al (wt.%) austenitic steel were studied after quenching and annealing.
Journal ArticleDOI
Modelling the strain-induced precipitation kinetics of vanadium carbonitride during hot working of precipitation-hardened Ferritic–Pearlitic steels
TL;DR: In this paper, a model for describing the strain-induced precipitation kinetics of vanadium carbonitride in the hot deformed austenite of precipitation-hardened Ferritic-Pearlitic steels is presented.
Journal ArticleDOI
Bainitic chromium-tungsten steels with 3 Pct chromium
TL;DR: In this article, the impact toughness of 3Cr-1.5MoV and 2.25Cr-2WV steels was investigated and it was shown that alloying to improve the hardenability of the steel would promote the formation of acicular bainite, just as increasing the cooling rate does.
Journal ArticleDOI
In-situ observation of grain refinement in the simulated heat-affected zone of high-strength low-alloy steel by Zr-Ti combined deoxidation
TL;DR: In this article, the effect of Zr-Ti combined deoxidation on grain refinement in the simulated coarse-grained heat-affected zone of a high-strength low-alloy steel was investigated by means of analytical characterization techniques such as in-situ microscopy, transmission electron microscopy and electron backscattered diffraction analysis.