scispace - formally typeset
Journal ArticleDOI

Synthesis and characterization of magnetite nanoparticles via the chemical co-precipitation method

TLDR
In this article, the size of the magnetite nanoparticles was carefully controlled by varying the reaction temperature and through surface modification, which significantly affected the particle size, the electrical conductivity, and the magnetic properties.
Abstract
Magnetite nanoparticles were synthesized via the chemical co-precipitation method using ammonium hydroxide as the precipitating agent. The size of the magnetite nanoparticles was carefully controlled by varying the reaction temperature and through the surface modification. Herein, the hexanoic acid and oleic acid were introduced as the coating agents during the initial crystallization phase of the magnetite. Their structure and morphology were characterized by the Fourier transform infrared spectroscopy (FTIR), the X-ray diffraction (XRD) and the field-emission scanning electron microscopy (FE-SEM). Moreover, the electrical and magnetic properties were studied by using a conductivity meter and a vibrating sample magnetometer (VSM), respectively. Both of the bare magnetite and the coated magnetite were of the cubic spinel structure and the spherical-shaped morphology. The reaction temperature and the surface modification critically affected the particle size, the electrical conductivity, and the magnetic properties of these particles. The particle size of the magnetite was increased through the surface modification and reaction temperature. In this study, the particle size of the magnetite nanoparticles was successfully controlled to be in the range of 10–40 nm, suitable for various biomedical applications. The electrical conductivity of the smallest particle size was 1.3 × 10−3 S/cm, within the semi-conductive materials range, which was higher than that of the largest particle by about 5 times. All of the magnetite nanoparticles showed the superparamagnetic behavior with high saturation magnetization. Furthermore, the highest magnetization was 58.72 emu/g obtained from the hexanoic acid coated magnetite nanoparticles.

read more

Citations
More filters
Journal ArticleDOI

Synthesis, characterization, applications, and challenges of iron oxide nanoparticles

TL;DR: This review summarizes the methods for the preparation of iron oxide NPs, size and morphology control, and magnetic properties with recent bioengineering, commercial, and industrial applications.
Journal ArticleDOI

Iron oxide nanoparticles: Diagnostic, therapeutic and theranostic applications.

TL;DR: The synthesis, surface functionalization and characterization of iron oxide nanoparticles, as well as their (pre‐) clinical use in diagnostic, therapeutic and theranostic settings, are summarized.
Journal ArticleDOI

Magnetic magnetite (Fe3O4) nanoparticle synthesis and applications for lead (Pb2+) and chromium (Cr6+) removal from water.

TL;DR: Fe3O4 nanoparticles are promising potential adsorbents and exhibited remarkable reusability for metal ions removal in water and wastewater treatment.
Journal ArticleDOI

Green synthesized iron nanoparticles by green tea and eucalyptus leaves extracts used for removal of nitrate in aqueous solution

TL;DR: In this paper, the authors used green tea (GT-Fe) and eucalyptus leaves (EL-Fe extracts, which regarded as cleaner productions can be used for the efficient removal of nitrate.
Journal ArticleDOI

Surface Modification of Magnetic Iron Oxide Nanoparticles.

TL;DR: This review summarizes recent advances in the surface modification of IONPs with small organic molecules, polymers and inorganic materials and their limitations in practical applications.
References
More filters
Journal ArticleDOI

Size-Controlled Synthesis of Magnetite Nanoparticles

TL;DR: The reported procedure can be used as a general approach to various ferrite nanoparticles and nanoparticle superlattices.
Journal ArticleDOI

Magnetic nanoparticles for drug delivery

TL;DR: The problems and recent advances in the development of magnetic NPs for drug delivery are reviewed, focusing particularly on the materials involved.
Journal ArticleDOI

Oleic acid coating on the monodisperse magnetite nanoparticles

TL;DR: In this paper, Oleic acid (OA)-coated magnetite nanoparticles of 7 and 19 µm were obtained by the seed-mediated high temperature thermal decomposition of iron(III) acetylacetonate (Fe(acac) 3 ) precursor method.
Journal ArticleDOI

Montmorillonite-supported magnetite nanoparticles for the removal of hexavalent chromium [Cr(VI)] from aqueous solutions

TL;DR: Fundamental results demonstrate that the montmorillonite-supported magnetite nanoparticles are readily prepared, enabling promising applications for the removal of hexavalent chromium from aqueous solution.
Journal ArticleDOI

Preparation and properties of magnetic Fe3O4–chitosan nanoparticles

TL;DR: In this paper, the covalent binding of chitosan (CTS) onto the surface of magnetic Fe3O4 nanoparticles which were prepared by hydrothermal method using H2O2 as an oxidizer.
Related Papers (5)