Seven particles captured by the Stardust Interstellar Dust Collector and returned to Earth for laboratory analysis have features consistent with an origin in the contemporary interstellar dust stream. More than 50 spacecraft debris particles were also identified. The interstellar dust candidates are readily distinguished from debris impacts on the basis of elemental composition and/or impact trajectory. The seven candidate interstellar particles are diverse in elemental composition, crystal structure, and size. The presence of crystalline grains and multiple iron-bearing phases, including sulfide, in some particles indicates that individual interstellar particles diverge from any one representative model of interstellar dust inferred from astronomical observations and theory.

/pdf/evidence-for-interstellar-origin-of-seven-dust-particles-1nsuftj3q7.pdf

Evidence for interstellar origin of seven dust particles collected by the Stardust spacecraft

Comet samples returned to Earth by the NASA Stardust mission have provided a surprising glimpse into the nature of early Solar System materials and an epiphany on the origin of the initial rocky materials that once filled the cold regions of the solar nebula. The findings show that the cold regions of the early Solar System were not isolated and were not a refuge where interstellar materials could commonly survive. Wild 2, the sampled comet, appears to be a typical active Jupiter family comet, and yet most of its sampled micron and larger grains are familiar high-temperature meteoritic materials, such as chondrule fragments, that were transported to cold nebular regions. The rocky components in primitive asteroids and comets may differ because asteroid formation was dominated by local materials, whereas comets formed from mixed materials, many of which were transported from very distant locations.

The Stardust Mission: Analyzing Samples from the Edge of the Solar System

https://pubs.rsc.org/en/content/articlepdf/2015/cc/c5cc07405c

Space science applications for conducting polymer particles: synthetic mimics for cosmic dust and micrometeorites

We report the quantitative characterization by synchrotron soft X-ray spectroscopy of 31 potential impact features in the aerogel capture medium of the Stardust Interstellar Dust Collector. Samples were analyzed in aerogel by acquiring high spatial resolution maps and high energy-resolution spectra of major rock-forming elements Mg, Al, Si, Fe, and others. We developed diagnostic screening tests to reject spacecraft secondary ejecta and terrestrial contaminants from further consideration as interstellar dust candidates. The results support an extraterrestrial origin for three interstellar candidates: I1043,1,30 (Orion) is a 3 pg particle with Mg-spinel, forsterite, and an iron-bearing phase. I1047,1,34 (Hylabrook) is a 4 pg particle comprising an olivine core surrounded by low-density, amorphous Mg-silicate and amorphous Fe, Cr, and Mn phases. I1003,1,40 (Sorok) has the track morphology of a high-speed impact, but contains no detectable residue that is convincingly distinguishable from the background aerogel. Twenty-two samples with an anthropogenic origin were rejected, including four secondary ejecta from impacts on the Stardust spacecraft aft solar panels, nine ejecta from secondary impacts on the Stardust Sample Return Capsule, and nine contaminants lacking evidence of an impact. Other samples in the collection included I1029,1,6, which contained surviving solar system impactor material. Four samples remained ambiguous: I1006,2,18, I1044,2,32, and I1092,2,38 were too dense for analysis, and we did not detect an intact projectile in I1044,3,33. We detected no radiation effects from the synchrotron soft X-ray analyses; however, we recorded the effects of synchrotron hard X-ray radiation on I1043,1,30 and I1047,1,34.

/pdf/stardust-interstellar-preliminary-examination-iv-scanning-1bog0nr3ah.pdf

Stardust Interstellar Preliminary Examination IV: Scanning transmission X-ray microscopy analyses of impact features in the Stardust Interstellar Dust Collector

The NASA Stardust mission used silica aerogel slabs to slowly decelerate and capture impinging cosmic dust particles for return to Earth. During this process, impact tracks are generated along the trajectory of the particle into the aerogel. It is believed that the morphology and dimensions of these tracks, together with the state of captured grains at track termini, may be linked to the size, velocity, and density of the impacting cosmic dust grain. Here, we present the results of laboratory hypervelocity impact experiments, during which cosmic dust analog particles (diameters of between 0.2 and 0.4 mu m), composed of olivine, orthopyroxene, or an organic polymer, were accelerated onto Stardust flight-spare low-density (approximately 0.01 g cm(-3)) silica aerogel. The impact velocities (3-21 km s(-1)) were chosen to simulate the range of velocities expected during Stardust's interstellar dust (ISD) collection phases. Track lengths and widths, together with the success of particle capture, are analyzed as functions of impact velocity and particle composition, density, and size. Captured terminal particles from low-density organic projectiles become undetectable at lower velocities than those from similarly sized, denser mineral particles, which are still detectable (although substantially altered by the impact process) at 15 km s(-1). The survival of these terminal particles, together with the track dimensions obtained during low impact speed capture of small grains in the laboratory, indicates that two of the three best Stardust candidate extraterrestrial grains were actually captured at speeds much lower than predicted. Track length and diameters are, in general, more sensitive to impact velocities than previously expected, which makes tracks of particles with diameters of 0.4 mu m and below hard to identify at low capture speeds (<10 km s(-1)). Therefore, although captured intact, the majority of the interstellar dust grains returned to Earth by Stardust remain to be found.

https://onlinelibrary.wiley.com/doi/pdf/10.1111/maps.12173

Stardust Interstellar Preliminary Examination IX: High-speed interstellar dust analog capture in Stardust flight-spare aerogel

–Here, we report the identiﬁcation of 69 tracks in approximately 250 cm 2 of aerogelcollectors of the Stardust Interstellar Dust Collector. We identiﬁed these tracks throughStardust@home, a distributed internet-based virtual microscope and search engine, in which> 30,000 amateur scientists collectively performed >9 9 10 7 searches on approximately 10 6 ﬁelds of view. Using calibration images, we measured individual detection efﬁciency, andfound that the individual detection efﬁciency for tracks > 2.5 lm in diameter was >0.6, andwas >0.75 for tracks >3 lm in diameter. Because most ﬁelds of view were searched >30times, these results could be combined to yield a theoretical detection efﬁciency near unity.The initial expectation was that interstellar dust would be captured at very high speed. Theactual tracks discovered in the Stardust collector, however, were due to low-speed impacts,and were morphologically strongly distinct from the calibration images. As a result, thedetection efﬁciency of these tracks was lower than detection efﬁciency of calibrationspresented in training, testing, and ongoing calibration. Nevertheless, as calibration imagesbased on low-speed impacts were added later in the project, detection efﬁciencies for low-speed tracks rose dramatically. We conclude that a massively distributed, calibrated search,with amateur collaborators, is an effective approach to the challenging problem ofidentiﬁcation of tracks of hypervelocity projectiles captured in aerogel.1510 A. J. Westphal et al.

/pdf/stardust-interstellar-preliminary-examination-i-d6iyfzpi84.pdf

Fred Jacob Gray

Papers

Stardust Interstellar Preliminary Examination I: Identification of tracks in aerogel