There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality.

Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

I and i

http://www.eecs.ucf.edu/~dcm/Teaching/COT4810-Spring2011/Literature/SensorNetworksSurvey.pdf

Wireless sensor networks: a survey

We develop and analyze low-complexity cooperative diversity protocols that combat fading induced by multipath propagation in wireless networks. The underlying techniques exploit space diversity available through cooperating terminals' relaying signals for one another. We outline several strategies employed by the cooperating radios, including fixed relaying schemes such as amplify-and-forward and decode-and-forward, selection relaying schemes that adapt based upon channel measurements between the cooperating terminals, and incremental relaying schemes that adapt based upon limited feedback from the destination terminal. We develop performance characterizations in terms of outage events and associated outage probabilities, which measure robustness of the transmissions to fading, focusing on the high signal-to-noise ratio (SNR) regime. Except for fixed decode-and-forward, all of our cooperative diversity protocols are efficient in the sense that they achieve full diversity (i.e., second-order diversity in the case of two terminals), and, moreover, are close to optimum (within 1.5 dB) in certain regimes. Thus, using distributed antennas, we can provide the powerful benefits of space diversity without need for physical arrays, though at a loss of spectral efficiency due to half-duplex operation and possibly at the cost of additional receive hardware. Applicable to any wireless setting, including cellular or ad hoc networks-wherever space constraints preclude the use of physical arrays-the performance characterizations reveal that large power or energy savings result from the use of these protocols.

Cooperative diversity in wireless networks: Efficient protocols and outage behavior

Cognitive radio is viewed as a novel approach for improving the utilization of a precious natural resource: the radio electromagnetic spectrum. The cognitive radio, built on a software-defined radio, is defined as an intelligent wireless communication system that is aware of its environment and uses the methodology of understanding-by-building to learn from the environment and adapt to statistical variations in the input stimuli, with two primary objectives in mind: /spl middot/ highly reliable communication whenever and wherever needed; /spl middot/ efficient utilization of the radio spectrum. Following the discussion of interference temperature as a new metric for the quantification and management of interference, the paper addresses three fundamental cognitive tasks. 1) Radio-scene analysis. 2) Channel-state estimation and predictive modeling. 3) Transmit-power control and dynamic spectrum management. This work also discusses the emergent behavior of cognitive radio.

/pdf/cognitive-radio-brain-empowered-wireless-communications-9m6gu0vz1z.pdf

Cognitive radio: brain-empowered wireless communications

Networking together hundreds or thousands of cheap microsensor nodes allows users to accurately monitor a remote environment by intelligently combining the data from the individual nodes. These networks require robust wireless communication protocols that are energy efficient and provide low latency. We develop and analyze low-energy adaptive clustering hierarchy (LEACH), a protocol architecture for microsensor networks that combines the ideas of energy-efficient cluster-based routing and media access together with application-specific data aggregation to achieve good performance in terms of system lifetime, latency, and application-perceived quality. LEACH includes a new, distributed cluster formation technique that enables self-organization of large numbers of nodes, algorithms for adapting clusters and rotating cluster head positions to evenly distribute the energy load among all the nodes, and techniques to enable distributed signal processing to save communication resources. Our results show that LEACH can improve system lifetime by an order of magnitude compared with general-purpose multihop approaches.

/pdf/an-application-specific-protocol-architecture-for-wireless-1s7y9fiv40.pdf

An application-specific protocol architecture for wireless microsensor networks

A propagation prediction method that exploits a building database and considers the three-dimensional profile of the radio path is presented. Models and algorithms are provided that allow the application of Fresnel-Kirchhoff diffraction theory to arbitrarily oriented buildings of simple shapes. Building location information used by the diffraction models is in a form compatible with a geographic information system (GIS) database. Diffraction screens are constructed at all building edges, for both horizontal and vertical orientations, in order to consider all possible diffractions, and to compute field contributions that are often ignored. Multiple buildings and edges of the same building that introduce multiple successive diffractions are considered with a rigorous, recursive application of the diffraction theory that requires sampling the field distribution in each aperture. Robust and computationally efficient numerical methods are applied to solve the diffraction integrals. >

A deterministic approach to predicting microwave diffraction by buildings for microcellular systems

A discone antenna has a conducting cone having an apex and a conducting disc with a disc feed conductor extending from its center. The conducting disc is mounted at the apex of the cone in spaced relation therewith such that the disc feed conductor extends down into the cone through the cone's apex. A coaxial connector is mounted within the cone at the apex of the cone and defines a tuning cavity therein. A tuning slug is received in the tuning cavity through the apex of the cone and is vertically adjustable within the tuning cavity to tune the antenna.

Tunable discone antenna

With increasing interest in millimeter wave wireless communications, investigations on interactions between the human body and millimeter wave devices are becoming important. This paper gives examples of current regulatory requirements, and provides an example for a 60 GHz transceiver. Also, the propagation characteristics of millimeter-waves in the presence of the human body are studied, and four models representing different body parts are considered to evaluate thermal effects of millimeter-wave radiation on the body. Simulation results show that about 34% to 42% of the incident power is reflected at the skin surface at 60 GHz. This paper shows that power density is not suitable to determine exposure compliance when millimeter wave devices are used very close to the body. A temperature-based technique for the evaluation of safety compliance is proposed in this paper.

The Human Body and Millimeter-Wave Wireless Communication Systems: Interactions and Implications

This paper presents details and applications of a novel channel simulation software named NYUSIM, which can be used to generate realistic temporal and spatial channel responses to support realistic physical- and link-layer simulations and design for fifth-generation (5G) cellular communications. NYUSIM is built upon the statistical spatial channel model for broadband millimeter-wave (mmWave) wireless communication systems developed by researchers at New York University (NYU). The simulator is applicable for a wide range of carrier frequencies (500 MHz to 100 GHz), radio frequency (RF) bandwidths (0 to 800 MHz), antenna beamwidths (7 to 360 degrees for azimuth and 7 to 45 degrees for elevation), and operating scenarios (urban microcell, urban macrocell, and rural macrocell), and also incorporates multiple-input multiple-output (MIMO) antenna arrays at the transmitter and receiver. This paper also provides examples to demonstrate how to use NYUSIM for analyzing MIMO channel conditions and spectral efficiencies, which show that NYUSIM is an alternative and more realistic channel model compared to the 3rd Generation Partnership Project (3GPP) and other channel models for mmWave bands.

A Novel Millimeter-Wave Channel Simulator and Applications for 5G Wireless Communications

Millimeter wave (mmWave) communications is one of the key technologies for future 5th generation (5G) wireless networks. In this paper, we investigate the problem of medium access control (MAC) in mmWave networks. We develop a frame-based scheduling directional MAC protocol, termed FDMAC, to achieve the goal of leveraging collision-free concurrent transmissions to fully exploit spatial reuse in mmWave networks. The high efficiency of FDMAC is achieved by amortizing the scheduling overhead over multiple concurrent, back-to-back transmissions in a row. The core of FDMAC is a graph coloring-based scheduling algorithm, termed greedy coloring (GC) algorithm, that can compute near-optimal schedules with respect to the total transmission time with low complexity. FDMAC is analyzed and evaluated with simulations.

/pdf/frame-based-medium-access-control-for-5g-wireless-networks-3i8iggjhtz.pdf

Theodore S. Rappaport

Papers

A deterministic approach to predicting microwave diffraction by buildings for microcellular systems

Tunable discone antenna

The Human Body and Millimeter-Wave Wireless Communication Systems: Interactions and Implications

A Novel Millimeter-Wave Channel Simulator and Applications for 5G Wireless Communications

Frame-Based Medium Access Control for 5G Wireless Networks