Showing papers in "arXiv: Soft Condensed Matter in 2019"

Phase field modelling of crack propagation, branching and coalescence in rocks

Abstract: We present a phase field model (PFM) for simulating complex crack patterns including crack propagation, branching and coalescence in rock. The phase field model is implemented in COMSOL and is based on the strain decomposition for the elastic energy, which drives the evolution of the phase field. Then, numerical simulations of notched semi-circular bend (NSCB) tests and Brazil splitting tests are performed. Subsequently, crack propagation and coalescence in rock plates with multiple echelon flaws and twenty parallel flaws are studied. Finally, complex crack patterns are presented for a plate subjected to increasing internal pressure, the (3D) Pertersson beam and a 3D NSCB test. All results are in good agreement with previous experimental and numerical results.

Adaptive locomotion of artificial microswimmers

Abstract: Bacteria can exploit mechanics to display remarkable plasticity in response to locally changing physical and chemical conditions. Compliant structures play a striking role in their taxis behavior, specifically for navigation inside complex and structured environments. Bioinspired mechanisms with rationally designed architectures capable of large, nonlinear deformation present opportunities for introducing autonomy into engineered small-scale devices. This work analyzes the effect of hydrodynamic forces and rheology of local surroundings on swimming at low Reynolds number, identifies the challenges and benefits of utilizing elastohydrodynamic coupling in locomotion, and further develops a suite of machinery for building untethered microrobots with self-regulated mobility. We demonstrate that coupling the structural and magnetic properties of artificial microswimmers with the dynamic properties of the fluid leads to adaptive locomotion in the absence of on-board sensors.

Odd elasticity

Abstract: Hooke's law states that the forces or stresses experienced by an elastic object are proportional to the applied deformations or strains. The number of coefficients of proportionality between stress and strain, i.e., the elastic moduli, is constrained by energy conservation. In this Letter, we lift this restriction and generalize linear elasticity to active media with non-conservative microscopic interactions that violate mechanical reciprocity. This generalized framework, which we dub odd elasticity, reveals that two additional moduli can exist in a two-dimensional isotropic solid with active bonds. Such an odd-elastic solid can be regarded as a distributed engine: work is locally extracted, or injected, during quasi-static cycles of deformation. Using continuum equations, coarse-grained microscopic models, and numerical simulations, we uncover phenomena ranging from activity-induced auxetic behavior to wave propagation powered by self-sustained active elastic cycles. Besides providing insights beyond existing hydrodynamic theories of active solids, odd elasticity suggests design principles for emergent autonomous materials.

Printing surface charge as a new paradigm to program droplet transport

Abstract: Directed, long-range and self-propelled transport of droplets on solid surfaces, especially on water repellent surfaces, is crucial for many applications from water harvesting to bio-analytical devices. One appealing strategy to achieve the preferential transport is to passively control the surface wetting gradients, topological or chemical, to break the asymmetric contact line and overcome the resistance force. Despite extensive progress, the directional droplet transport is limited to small transport velocity and short transport distance due to the fundamental trade-off: rapid transport of droplet demands a large wetting gradient, whereas long-range transport necessitates a relatively small wetting gradient. Here, we report a radically new strategy that resolves the bottleneck through the creation of an unexplored gradient in surface charge density (SCD). By leveraging on a facile droplet printing on superamphiphobic surfaces as well as the fundamental understanding of the mechanisms underpinning the creation of the preferential SCD, we demonstrate the self-propulsion of droplets with a record-high velocity over an ultra-long distance without the need for additional energy input. Such a Leidenfrost-like droplet transport, manifested at ambient condition, is also genetic, which can occur on a variety of substrates such as flexible and vertically placed surfaces. Moreover, distinct from conventional physical and chemical gradients, the new dimension of gradient in SCD can be programmed in a rewritable fashion. We envision that our work enriches and extends our capability in the manipulation of droplet transport and would find numerous potential applications otherwise impossible.

Computational models for active matter

Abstract: A variety of computational models have been developed to describe active matter at different length and time scales. The diversity of the methods and the challenges in modeling active matter---ranging from molecular motors and cytoskeletal filaments over artificial and biological swimmers on microscopic to groups of animals on macroscopic scales---mainly originate from their out-of-equilibrium character, multiscale nature, nonlinearity, and multibody interactions. In the present review, various modeling approaches and numerical techniques are addressed, compared, and differentiated to illuminate the innovations and current challenges in understanding active matter. The complexity increases from minimal microscopic models of dry active matter toward microscopic models of active matter in fluids. Complementary, coarse-grained descriptions and continuum models are elucidated. Microscopic details are often relevant and strongly affect collective behaviors, which implies that the selection of a proper level of modeling is a delicate choice, with simple models emphasizing universal properties and detailed models capturing specific features. Finally, current approaches to further advance the existing models and techniques to cope with real-world applications, such as complex media and biological environments, are discussed.

Bacterial hopping and trapping in porous media

Abstract: Diverse processes--e.g. bioremediation, biofertilization, and microbial drug delivery--rely on bacterial migration in disordered, three-dimensional (3D) porous media. However, how pore-scale confinement alters bacterial motility is unknown due to the opacity of typical 3D media. As a result, models of migration are limited and often employ ad hoc assumptions. Here we reveal that the paradigm of run-and-tumble motility is dramatically altered in a porous medium. By directly visualizing individual Escherichia coli, we find that the cells are intermittently and transiently trapped as they navigate the pore space, exhibiting diffusive behavior at long time scales. The trapping durations and the lengths of "hops" between traps are broadly distributed, reminiscent of transport in diverse other disordered systems; nevertheless, we show that these quantities can together predict the long-time bacterial translational diffusivity. Our work thus provides a revised picture of bacterial motility in complex media and yields principles for predicting cellular migration.

The 2019 Motile Active Matter Roadmap

Abstract: Activity and autonomous motion are fundamental in living and engineering systems. This has stimulated the new field of active matter in recent years, which focuses on the physical aspects of propulsion mechanisms, and on motility-induced emergent collective behavior of a larger number of identical agents. The scale of agents ranges from nanomotors and microswimmers, to cells, fish, birds, and people. Inspired by biological microswimmers, various designs of autonomous synthetic nano- and micromachines have been proposed. Such machines provide the basis for multifunctional, highly responsive, intelligent (artificial) active materials, which exhibit emergent behavior and the ability to perform tasks in response to external stimuli. A major challenge for understanding and designing active matter is their inherent nonequilibrium nature due to persistent energy consumption, which invalidates equilibrium concepts such as free energy, detailed balance, and time-reversal symmetry. Unraveling, predicting, and controlling the behavior of active matter is a truly interdisciplinary endeavor at the interface of biology, chemistry, ecology, engineering, mathematics, and physics. The vast complexity of phenomena and mechanisms involved in the self-organization and dynamics of motile active matter comprises a major challenge. Hence, to advance, and eventually reach a comprehensive understanding, this important research area requires a concerted, synergetic approach of the various disciplines.

Molecular streaming and its voltage control in {\aa}ngstr\"om scale channels

Abstract: The field of nanofluidics has shown considerable progress over the past decade thanks to key instrumental advances, leading to the discovery of a number of exotic transport phenomena for fluids and ions under extreme confinement. Recently, van der Waals assembly of 2D materials allowed fabrication of artificial channels with angstr\"om-scale precision. This ultimate confinement to the true molecular scale revealed unforeseen behaviour for both mass and ionic transport. In this work, we explore pressure-driven streaming in such molecular-size slits and report a new electro-hydrodynamic effect under coupled pressure and electric force. It takes the form of a transistor-like response of the pressure induced ionic streaming: an applied bias of a fraction of a volt results in an enhancement of the streaming mobility by up to 20 times. The gating effect is observed with both graphite and boron nitride channels but exhibits marked material-dependent features. Our observations are rationalized by a theoretical framework for the flow dynamics, including the frictional interaction of water, ions and the confining surfaces as a key ingredient. The material dependence of the voltage modulation can be traced back to a contrasting molecular friction on graphene and boron nitride. The highly nonlinear transport under molecular-scale confinement offers new routes to actively control molecular and ion transport and design elementary building blocks for artificial ionic machinery, such as ion pumps. Furthermore, it provides a versatile platform to explore electro-mechanical couplings potentially at play in recently discovered mechanosensitive ionic channels.

Model for disordered proteins with strongly sequence-dependent liquid phase behavior

Abstract: Phase separation of intrinsically disordered proteins is important for the formation of membraneless organelles, or biomolecular condensates, which play key roles in the regulation of biochemical processes within cells. In this work, we investigated the phase separation of different sequences of a coarse-grained model for intrinsically disordered proteins and discovered a surprisingly rich phase behavior. We studied both the fraction of total hydrophobic parts and the distribution of hydrophobic parts. Not surprisingly, sequences with larger hydrophobic fractions showed conventional liquid-liquid phase separation. The location of the critical point was systematically influenced by the terminal beads of the sequence, due to changes in interfacial composition and tension. For sequences with lower hydrophobicity, we observed not only conventional liquid-liquid phase separation, but also reentrant phase behavior, in which the liquid phase density decreases at lower temperatures. For some sequences, we observed formation of open phases consisting of aggregates, rather than a normal liquid. These aggregates had overall lower densities than the conventional liquid phases, and exhibited complex geometries with large interconnected string-like or membrane-like clusters. Our findings suggest that minor alterations in the ordering of residues may lead to large changes in the phase behavior of the protein, a fact of significant potential relevance for biology.

Inertial effects of self-propelled particles: from active Brownian to active Langevin motion

Abstract: Active particles which are self-propelled by converting energy into mechanical motion represent an expanding research realm in physics and chemistry. For micron-sized particles moving in a liquid ("microswimmers"), most of the basic features have been described by using the model of overdamped active Brownian motion. However, for macroscopic particles or microparticles moving in a gas, inertial effects become relevant such that the dynamics is underdamped. Therefore, recently, active particles with inertia have been described by extending the active Brownian motion model to active Langevin dynamics which include inertia. In this perspective article recent developments of active particles with inertia ("microflyers") are summarized both for single particle properties and for collective effects of many particles. There include: inertial delay effects between particle velocity and self-propulsion direction, tuning of the long-time self-diffusion by the moment of inertia, effects of fictitious forces in non-inertial frames, and the influence of inertia on motility-induced phase separation. Possible future developments and perspectives are also proposed and discussed.

Perspective: Nonequilibrium glassy dynamics in dense systems of active particles

Abstract: Despite the diversity of materials designated as active matter, virtually all active systems undergo a form of dynamic arrest when crowding and activity compete, reminiscent of the dynamic arrest observed in colloidal and molecular fluids undergoing a glass transition. We present a short perspective on recent and ongoing efforts to understand how activity competes with other physical interactions in dense systems. We first review recent experimental work on active materials that uncovered both classic signatures of glassy dynamics and intriguing novel phenomena at large density. We introduce a minimal model of self-propelled particles where the competition between interparticle interactions, crowding, and self-propulsion can be studied in great detail. We discuss more complex models that include some additional, material-specific ingredients. We end with some general perspectives on dense active materials, suggesting directions for future research, in particular for theoretical work.

Topological structure and dynamics of three dimensional active nematics

Abstract: Point-like motile topological defects control the universal dynamics of diverse two-dimensional active nematics ranging from shaken granular rods to cellular monolayers. A comparable understanding in higher dimensions has yet to emerge. We report the creation of three-dimensional active nematics by dispersing extensile microtubule bundles in a passive colloidal liquid crystal. Light-sheet microscopy reveals the millimeter-scale structure of active nematics with a single bundle resolution and the temporal evolution of the associated nematic director field. The dominant excitations of three-dimensional active nematics are extended charge-neutral disclination loops that undergo complex dynamics and recombination events. These studies introduce a new class of non-equilibrium systems whose turbulent-like dynamics arises from the interplay between internally generated active stresses, the chaotic flows and the topological structure of the constituent defects.

Programming Soft Robots with Flexible Mechanical Metamaterials

Abstract: The complex behavior of highly deformable mechanical metamaterials can substantially enhance the performance of soft robots.

Monolithic shape-programmable dielectric liquid crystal elastomer actuators

Abstract: Macroscale robotic systems have demonstrated great capabilities of high speed, precise, and agile functions. However, the ability of soft robots to perform complex tasks, especially in centimeter and millimeter scale, remains limited due to the unavailability of fast, energy-efficient soft actuators that can programmably change shape. Here, we combine desirable characteristics from two distinct active materials: fast and efficient actuation from dielectric elastomers and facile shape programmability from liquid crystal elastomers into a single shape changing electrical actuator. Uniaxially aligned monoliths achieve strain rates over 120%/s with energy conversion efficiency of 20% while moving loads over 700 times the actuator weight. The combined actuator technology offers unprecedented opportunities towards miniaturization with precision, efficiency, and more degrees of freedom for applications in soft robotics and beyond.

Active glasses

Abstract: Active glassy matter has recently emerged as a novel class of non-equilibrium soft matter, combining energy-driven, active particle movement with dense and disordered glass-like behavior. Here we review the state-of-the-art in this field from an experimental, numerical, and theoretical perspective. We consider both non-living and living active glassy systems, and discuss how several hallmarks of glassy dynamics (dynamical slowdown, fragility, dynamical heterogeneity, violation of the Stokes-Einstein relation, and aging) are manifested in such materials. We start by reviewing the recent experimental evidence in this area of research, followed by an overview of the main numerical simulation studies and physical theories of active glassy matter. We conclude by outlining several open questions and possible directions for future work.

Soft wetting and the Shuttleworth effect, at the crossroads between thermodynamics and mechanics.

Abstract: Extremely compliant elastic materials, such as thin membranes or soft gels, can be deformed when wetted by a liquid drop. It is commonly assumed that the solid capillarity in "soft wetting" can be treated in the same manner as liquid surface tension. However, the physical chemistry of a solid interface is itself affected by any distortion with respect to the elastic reference state. This gives rise to phenomena that have no counterpart in liquids: the mechanical surface stress is different from the excess free energy in surface. Here we point out some striking consequences of this "Shuttleworth effect" in the context of wetting on deformable substrates, such as the appearance of elastic singularities and unconventional capillary forces. We provide a synthesis between different viewpoints on soft wetting (microscopic and macroscopic, mechanics and thermodynamics), and point out key open issues in the field.

Enlightening force chains: a review of photoelasticimetry in granular matter

Abstract: A photoelastic material will reveal its internal stresses when observed through polarizing filters. This eye-catching property has enlightened our understanding of granular materials for over half a century, whether in the service of art, education, or scientific research. In this review article in honor of Robert Behringer, we highlight both his pioneering use of the method in physics research, and its reach into the public sphere through museum exhibits and outreach programs. We aim to provide clear protocols for artists, exhibit-designers, educators, and scientists to use in their own endeavors. It is our hope that this will build awareness about the ubiquitous presence of granular matter in our lives, enlighten its puzzling behavior, and promote conversations about its importance in environmental and industrial contexts. To aid in this endeavor, this paper also serves as a front door to a detailed wiki containing open, community-curated guidance on putting these methods into practice.

Osmosis, from molecular insights to large-scale applications

Abstract: Osmosis is a universal phenomenon occurring in a broad variety of processes and fields. It is the archetype of entropic forces, both trivial in its fundamental expression - the van 't Hoff perfect gas law - and highly subtle in its physical roots. While osmosis is intimately linked with transport across membranes, it also manifests itself as an interfacial transport phenomenon: the so-called diffusio-osmosis and -phoresis, whose consequences are presently actively explored for example for the manipulation of colloidal suspensions or the development of active colloidal swimmers. Here we give a global and unifying view of the phenomenon of osmosis and its consequences with a multi-disciplinary perspective. Pushing the fundamental understanding of osmosis allows to propose new perspectives for different fields and we highlight a number of examples along these lines, for example introducing the concepts of osmotic diodes, active separation and far from equilibrium osmosis, raising in turn fundamental questions in the thermodynamics of separation. The applications of osmosis are also obviously considerable and span very diverse fields. Here we discuss a selection of phenomena and applications where osmosis shows great promises: osmotic phenomena in membrane science (with recent developments in separation, desalination, reverse osmosis for water purification thanks in particular to the emergence of new nanomaterials); applications in biology and health (in particular discussing the kidney filtration process); osmosis and energy harvesting (in particular, osmotic power and blue energy as well as capacitive mixing); applications in detergency and cleaning, as well as for oil recovery in porous media.

Solid Propellants

Abstract: Solid propellants are energetic materials used to launch and propel rockets and missiles. Although their history dates to the use of black powder more than two millennia ago, greater performance demands and the need for "insensitive munitions" that are resistant to accidental ignition have driven much research and development over the past half-century. The focus of this review is the material aspects of propellants, rather than their performance, with an emphasis on the polymers that serve as binders for oxidizer particles and as fuel for composite propellants. The prevalent modern binders are discussed along with a discussion of the limitations of state-of-the-art modeling of composite motors.

Viewing Earth's surface as a soft matter landscape.

Abstract: The Earth's surface is composed of a staggering diversity of particulate-fluid mixtures: dry to wet, dilute to dense, colloidal to granular, and attractive to repulsive particles. This material variety is matched by the range of relevant stresses and strain rates, from laminar to turbulent flows, and steady to intermittent forcing, leading to anything from rapid and catastrophic landslides to the slow relaxation of soil and rocks over geologic timescales. Geophysical flows sculpt landscapes, but also threaten human lives and infrastructure. From a physics point of view, virtually all Earth and planetary landscapes are composed of soft matter, in the sense they are both deformable and sensitive to collective effects. Geophysical materials, however, often involve compositions and flow geometries that have not yet been examined in physics. In this review we explore how a soft-matter perspective has helped to illuminate, and even predict, the rich dynamics of Earth materials and their associated landscapes. We also highlight some novel phenomena of geophysical flows that challenge, and will hopefully inspire, more fundamental work in soft matter.

Dense active matter model of motion patterns in confluent cell monolayers

Abstract: Epithelial cell monolayers show remarkable displacement and velocity correlations over distances of ten or more cell sizes that are reminiscent of supercooled liquids and active nematics. We show that many observed features can be described within the framework of dense active matter, and argue that persistent uncoordinated cell motility coupled to the collective elastic modes of the cell sheet is sufficient to produce swirl-like correlations. We obtain this result using both continuum active linear elasticity and a normal modes formalism, and validate analytical predictions with numerical simulations of two agent-based cell models, soft elastic particles and the self-propelled Voronoi model together with in-vitro experiments of confluent corneal epithelial cell sheets. Simulations and normal mode analysis perfectly match when tissue-level reorganisation occurs on times longer than the persistence time of cell motility. Our analytical model quantitatively matches measured velocity correlation functions over more than a decade with a single fitting parameter.

A phase diagram for bacterial swarming

Abstract: Bacterial swarming is a rapid mass-migration, in which thousands of cells spread collectively to colonize a surface. Physically, swarming is a natural example of active particles that use energy to generate motion. Accordingly, understanding the constraints physics imposes on the dynamics is essential to understand the mechanisms underlying the swarming phenomenon. We present new experiments of swarming Bacillus subtilis mutants with different aspect ratios and densities. Analyzing the dynamics reveals a rich phase diagram of qualitatively distinct swarming regimes, describing how the shape and density of cells govern the global dynamical characteristics of the entire swarm. Moreover, we show that under standard conditions bacteria inhabit a region of phase space that is associated with rapid mixing and robust dynamics, with homogeneous density and no preferred direction of motion. This contrasts characteristic clustering behavior of self-propelled rods that is recovered only for very elongated mutant species. Thus, bacteria have adapted their physics to optimize the principle functions assumed for swarming.

Feedback-Controlled Active Brownian Colloids with Space-Dependent Rotational Dynamics

Abstract: The non-thermal nature of self-propelling colloids offers new insights into non-equilibrium physics. The central mathematical model to describe their trajectories is active Brownian motion, where a particle moves with a constant speed, while randomly changing direction due to rotational diffusion. While several feedback strategies exist to achieve position-dependent velocity, the possibility of spatial and temporal control over rotational diffusion, which is inherently dictated by thermal fluctuations, remains untapped. Here, we decouple rotational diffusion from thermal noise. Using external magnetic fields and discrete-time feedback loops, we tune the rotational diffusivity of active colloids above and below its thermal value at will and explore a rich range of phenomena including anomalous diffusion, directed transport, and localization. These findings add a new dimension to the control of active matter, with implications for a broad range of disciplines, from optimal transport to smart materials.

Extreme active matter at high densities

Abstract: Extreme active matter, an assembly of self-propelled particles with large persistence time $\tau_p$ and high Peclet number, exhibits remarkable behaviour at high densities. As $\tau_p\to 0$, the assembly undergoes a gradual slowing down of density relaxations, as one reduces the active propulsion force $f$, until at the glass transition, the relaxation times diverge. In the other limit, $\tau_p \to \infty$, the fluid jams on lowering $f$, at a critical threshold $f^*(\infty)$, with stresses concentrated along force-chains. As one moves away from this jamming threshold, the force-chains dynamically remodel, and the lifetime of the force-balanced configurations diverges as one approaches $f^*(\infty)$, by tuning $\tau_p$. In between these limits, the approach to dynamical arrest at low $f$, goes through a phase characterised by intermittency in the kinetic energy. This intermittency is a consequence of long periods of jamming followed by bursts of plastic yielding associated with Eshelby deformations, akin to the response of dense amorphous solids to an externally imposed shear. The frequency of these plastic bursts increases as one moves towards the intermittent phase-fluid boundary, where the correlated plastic events result in large scale vorticity and turbulence. Dense extreme active matter brings together the physics of glass, jamming, plasticity and turbulence, in a new state of driven classical matter.

Mechanics of a Plant in Fluid Flow

Abstract: Plants live in constantly moving fluid, whether air or water. In response to the loads associated with fluid motion, plants bend and twist, often with great amplitude. These large deformations are not found in traditional engineering application and thus necessitate new specialised scientific developments. Studying Fluid-Structure Interactions (FSI) in botany, forestry and agricultural science is crucial to the optimisation of biomass production for food, energy, and construction materials. FSI are also central in the study of the ecological adaptation of plants to their environment. This review paper surveys the mechanics of FSI on individual plants. We present a short refresher on fluids mechanics then dive in the statics and dynamics of plant-fluid interactions. For every phenomenon considered, we present the appropriate dimensionless numbers to characterise the problem, discuss the implications of these phenomena on biological processes, and propose future research avenues. We cover the concept of reconfiguration while considering poroelasticity, torsion, chirality, buoyancy, and skin friction. We also cover the dynamical phenomena of wave action, flutter, and vortex-induced vibrations.

Unsupervised learning for local structure detection in colloidal systems

Abstract: We introduce a simple, fast, and easy to implement unsupervised learning algorithm for detecting different local environments on a single-particle level in colloidal systems. In this algorithm, we use a vector of standard bond-orientational order parameters to describe the local environment of each particle. We then use a neural-network-based autoencoder combined with Gaussian mixture models in order to autonomously group together similar environments. We test the performance of the method on snapshots of a wide variety of colloidal systems obtained via computer simulations, ranging from simple isotropically interacting systems, to binary mixtures, and even anisotropic hard cubes. Additionally, we look at a variety of common self-assembled situations such as fluid-crystal and crystal-crystal coexistences, grain boundaries, and nucleation. In all cases, we are able to identify the relevant local environments to a similar precision as "standard", manually-tuned and system-specific, order parameters. In addition to classifying such environments, we also use the trained autoencoder in order to determine the most relevant bond orientational order parameters in the systems analyzed.

Directed aging, memory and Nature's greed

Abstract: Disordered materials are often out of equilibrium and evolve very slowly. This allows a memory of the imposed strains or preparation conditions to be encoded in the material. Here we consider "directed aging", where the elastic properties of a material evolve in the direction defined by its aging history. The evolution to a lower-energy configuration is controlled by steepest decent and affects stressed regions differently from unstressed ones. This process can be considered to be a "greedy algorithm" of Nature. Our experiments and simulations illustrate directed aging in examples in which the material's elasticity evolves as a direct consequence of the imposed deformation; the material itself decides how to evolve in order to produce responses that were not present inherently in the material.

Freezing a Flock: Motility-Induced Phase Separation in Polar Active Liquids

Abstract: Combining model experiments and theory, we investigate the dense phases of polar active matter beyond the conventional flocking picture. We show that above a critical density flocks assembled from self-propelled colloids arrest their collective motion, lose their orientational order and form solids that actively rearrange their local structure while continuously melting and freezing at their boundaries. We establish that active solidification is a first-order dynamical transition: active solids nucleate, grow, and slowly coarsen until complete phase separation with the polar liquids they coexists with. We then theoretically elucidate this phase behaviour by introducing a minimal hydrodynamic description of dense polar flocks and show that the active solids originate from a Motility-Induced Phase Separation. We argue that the suppression of collective motion in the form of solid jams is a generic feature of flocks assembled from motile units that reduce their speed as density increases, a feature common to a broad class of active bodies, from synthetic colloids to living creatures.

Activity-controlled Annealing of Colloidal Monolayers

Abstract: Molecular motors are essential to the living, they generate additional fluctuations that boost transport and assist assembly. Self-propelled colloids, that consume energy to move, hold similar potential for the man-made assembly of microparticles. Yet, experiments showing their use as a powerhouse in materials science lack. Our work explores the design of man-made materials controlled by fluctuations, arising from the internal forces generated by active colloids. Here we show a massive acceleration of the annealing of a monolayer of passive beads by moderate addition of self-propelled microparticles. We rationalize our observations with a model of collisions that drive active fluctuations to overcome kinetic barriers and activate the annealing. The experiment is quantitatively compared with Brownian dynamic simulations that further unveil a dynamical transition in the mechanism of annealing. Active dopants travel uniformly in the system or co-localize at the grain boundaries as a result of the persistence of their motion. Our findings uncover the potential of man-made materials controlled by internal activity and lay the groundwork for the rise of materials science beyond equilibrium.

Shear jamming and fragility in dense suspensions

Abstract: The phenomenon of shear-induced jamming is a factor in the complex rheological behavior of dense suspensions. Such shear-jammed states are fragile, i.e., they are not stable against applied stresses that are incompatible with the stress imposed to create them. This peculiar flow-history dependence of the stress response is due to flow-induced microstructures. To examine jammed states realized under constant shear stress, we perform dynamic simulations of non-Brownian particles with frictional contact forces and hydrodynamic lubrication forces. We find clear signatures that distinguish these fragile states from the more conventional isotropic jammed states.