Showing papers on "Piperidine published in 2017"

Selective Piperidine Synthesis Exploiting Iodine-Catalyzed Csp3–H Amination under Visible Light

Abstract: A route to selective piperidine formation through intramolecular catalytic Csp3–H amination is described. This hydrocarbon amination reaction employs a homogeneous iodine catalyst derived from halogen coordination between molecular iodine and a terminal oxidant. It relies on visible light initiation and proceeds within two catalytic cycles that comprise a radical C–H functionalization and an iodine-catalyzed C–N bond formation. Under these conditions, the commonly observed preference for pyrrolidine synthesis based on halogenated nitrogen intermediates within the Hofmann–Loffler domain is effectively altered in favor of a free-radical-promoted piperidine formation. The protocol is demonstrated for a total of 30 applications.

Mechanism of the Piperidine-Catalyzed Knoevenagel Condensation Reaction in Methanol: The Role of Iminium and Enolate Ions.

Abstract: The free energy profile of the piperidine catalyzed Knoevenagel condensation reaction of acetylacetone with benzaldehyde has been obtained by theoretical calculations. The carbinolamine formation step involves catalysis by methanol solvent, and its decomposition takes place via hydroxide ion elimination without a classical transition state, leading to the iminium ion. Hydroxide ion deprotonates the acetylacetone, forming an enolate that attacks the iminium ion and leads to an addition intermediate. The final step involves elimination of piperidine catalyst. Our analysis suggests the iminium ion formation has the highest barrier and the catalytic effect of piperidine is facilitating the elimination step rather than activation of the benzaldehyde electrophile. Experimental measures of the kinetics lead to an observed free energy barrier of 20.0 kcal mol–1, in good agreement with the theoretical value of 21.8 kcal mol–1 based on the free energy profile.

Stereoselective Synthesis of Isoxazolidines via Copper-Catalyzed Alkene Diamination.

Abstract: A convenient copper-catalyzed intramolecular/intermolecular alkene diamination reaction to synthesize 3-aminomethyl-functionalized isoxazolidines under mild reaction conditions and with generally high levels of diastereoselectivity was achieved. This reaction demonstrates that previously underutilized unsaturated carbamates are good [Cu]-catalyzed diamination substrates. Sulfonamides, anilines, benzamide, morpholine, and piperidine can serve as the external amine source. This relatively broad amine range is attributed to the mild reaction conditions. Reduction of the N–O bond could also be achieved, revealing the corresponding 3,4-diamino-1-alcohols efficiently.

Stereoselective Synthesis of Piperidines by Iridium-Catalyzed Cyclocondensation.

Abstract: An iridium-catalyzed cyclocondensation of amino alcohols and aldehydes is reported. Intramolecular allylic substitution by an enamine intermediate and subsequent in situ reduction furnishes 3,4-disubstituted piperidines with high enantiospecificity and good diastereoselectivity. The modular approach and the broad functional group tolerance provide access to diverse piperidine derivatives, which were further functionalized to give a versatile set of products.

Efficient Synthesis of Peptides with 4-Methylpiperidine as Fmoc Removal Reagent by Solid Phase Synthesis

Abstract: Solid phase peptide synthesis using the Fmoc/t-Bu strategy (SPPS-Fmoc/tBu) is the most widely used methodology for obtaining synthetic peptides. In this paper, we evaluate the viability of using 4-methylpiperidine as a reagent for deprotection of the amino acid alpha amino group in SPPS-Fmoc/tBu. For this purpose, the peptide (RRWQWRMKKLG) was simultaneously synthesized using 4-methylpiperidine or piperidine for Fmoc removal reagent. The obtained products had similar purities and yields. Finally, 21 peptides were synthesized using 4-methylpiperidine. Our results suggest that is possible to obtain synthetic peptides efficiently by the strategy SPPS-Fmoc/tBu when 4-methylpiperidine was used as reagent to remove Fmoc groups N-alpha protected amino acids.

Ligands and complexes based on piperidine and their exploitation of the ring opening polymerisation of rac-lactide

Abstract: A range of ligands based upon 2-(aminomethyl)piperidine have been successfully complexed to Mg(ii), Zn(ii) and group IV metal centres. These complexes have been characterised both in solution and solid state with different coordination geometries realised dependant on the nature of the ligand. For the Mg(ii) and Zn(ii) complexes, M(1-2)2, were isolated and analysed by DOSY NMR spectroscopy. These ligands also furnished diastereomeric group IV complexes, M(1-2)2(OiPr)2. Group IV salalen and salan complexes, M(4-5)(OR)2 were also found to be diastereomeric in nature, with either β-cis or α-cis geometriesrespectively. The tridentate ligand, 6H2, yielded five coordinate complexes with both Ti(iv) and Zr(iv). All complexes were screened for the ring opening polymerisation of rac-lactide under both solvent and melt conditions. For the Mg(ii) and Zn(ii) complexes, good activity was observed with Zn(1-2)2 demonstrating immortal polymerisation characteristics.

Stereoselective Coupling of N-tert-Butanesulfinyl Aldimines and β-Keto Acids: Access to β-Amino Ketones

Abstract: The reaction of chiral N-tert-butanesulfinyl aldimines with β-keto acids under basic conditions at room temperature proceeds with high levels of diastereocontrol, leading to β-amino ketones in high yields. Based on DFT calculations, an eight-membered cyclic transition state involving coordination of the lithium atom to the oxygens of carboxylate and sulfinyl units was proposed, being in agreement with the observed experimental diastereomeric ratios. The synthesis of the piperidine alkaloid (−)-pelletierine was successfully undertaken in order to demonstrate the utility of this methodology.

Piperidine Promoted Direct Sulfenylation of 2‐Naphthol with Aryl Thiols under Aqueous Conditions

Abstract: An efficient and convenient method has been developed for the preparation of aryl sulfides via a piperidine promoted direct sulfenylation of naphthols with arylthiols under aqueous conditions. This synthetic strategy features environmental friendliness, easy operation, and mild reaction conditions.

Design, Synthesis, and Fungicidal Activity of Novel Thiosemicarbazide Derivatives Containing Piperidine Fragments.

Abstract: In order to discover novel eco-friendly lead compounds for plant pathogenic fungi control, a series of benzaldehyde thiosemicarbazide derivatives with a piperidine moiety have been designed and synthesized. Fungicidal activities of all the synthesized compounds were evaluated in vitro. The results indicated that all the title compounds exhibited moderate to good fungicidal activities. Compound 3b displayed excellent activities against Pythium aphanidermatum, Rhizoctonia solani, Valsa mali, and Gaeu-mannomyces graminsis, with EC50 values lower than 10 μg/mL. Especially, in the case of Pythium aphanidermatum, its activity (EC50 = 1.6 μg/mL) is superior to the commercial azoxystrobin (EC50 = 16.9 μg/mL) and close to fluopicolide (EC50 = 1.0 μg/mL). Initial structure-activity relationship (SAR) analysis showed that the heterocyclic piperidine group can influence the biological activities of the title compounds significantly. The fungicidal activity of compounds with piperidine is better than that of compounds without piperidine. The highly-active compound 3b, with its simple structure and easy synthetic route, is worthy to be further studied as a new lead fungicide.

Phosphorus–nitrogen compounds. Part 37. Syntheses and structural characterizations, biological activities of mono and bis(4-fluorobenzyl)spirocyclotetraphosphazenes

Abstract: The Cl substitution reactions of octachlorocyclotetraphosphazene, N4P4Cl8, with one equimolar amount of (4-fluorobenzyl)diamines (1–3) affords mono(4-fluorobenzyl)spirocyclotetraphosphazenes (4–6) as minor products. However, the reactions of N4P4Cl8 with two equimolar amounts of (4-fluorobenzyl)diamines (1–3) leads to the formation of mono (4–6), 2-trans-6-bis (7–9, as major products) and 2-cis-6-bis (4-fluorobenzyl)spirocyclotetraphosphazenes (10–12). The 2-cis-6-bis compounds (10 and 12) were separated and purified using column chromatography as minor products, whereas compound 11 could not be isolated. The mono-spiro (4–6) and 2-trans-6-bis-spiro (7–9) cyclotetraphosphazenes were reacted with excess pyrrolidine in THF to afford the fully substituted hexapyrrolidino (4a-6a) and tetrapyrrolidino (7a-9a) products in high yield. Compound 9 was also reacted with piperidine, morpholine and 1,4-dioxa-8-azaspiro[4,5]decane (DASD) to obtain the tetraamino products (9b, 9c and 9d), respectively, due to its very high yield. The elemental analyses, mass spectra (ESI-MS), Fourier transform infrared (FTIR) spectra, and 1H, 13C{1H}, and 31P{1H} NMR data of the cyclotetraphosphazenes were in agreement with the suggested structures. The molecular structures of 7, 9 and 12 were established by X-ray crystallography. The antibacterial activities of the compounds against G(+) and G(−) bacteria and their antifungal activities against yeast strains were scrutinized. The results indicated that 4a and 5a were the most active compounds, especially to yeast strains. In addition, it was found that the most active compound toward DNA was 8. The cytotoxic activities of the cyclotetraphosphazenes against L929 fibroblast and MCF-7 breast cancer cell lines were elucidated. Compound 8a exhibited the most toxic effects against both types of cells.

Improved Fmoc Solid-Phase Peptide Synthesis of Oxytocin with High Bioactivity

Abstract: We described here the synthesis of oxytocin by an improved Fmoc solid-phase peptide synthesis (SPPS) method with a Rink-Amide resin as the solid support, HBTU as the coupling reagent, Fmoc-protected amino acids as the building blocks, and piperazine for Fmoc removal as a substitute for the standard reagent piperidine. Unlike previously reported syntheses, the removal of the S-Acm protecting group of Cys and cyclization forming the disulfide bond were carried out by using iodine on the resin with the fully protected peptide chains. Finally, a crude oxytocin with a purity of 92% was obtained by simultaneous cleavage of the peptide chains from the resin and removal of all side-chain protecting groups with trifluoroacetic acid containing the scavengers (yield 85%). The crude peptide was purified by using preparative RP-HPLC to obtain oxytocin (high purity 99.3%) with a bioactivity of 588 IU/mg, the highest reported so far in the literature. This investigation provides a contribution in efforts for the large-scale synthesis of oxytocin in high purity under mild conditions with iodine for on-resin disulfide bond formation and a substitute for the standard Fmoc-deprotecting reagent piperidine, a controlled substance.

Synthesis of 2-amino- and 2-arylazoazulenes via nucleophilic aromatic substitution of 2-chloroazulenes with amines and arylhydrazines

Abstract: The SNAr reaction of 2-chloroazulene derivative 1 with ethoxycarbonyl groups at the 1,3-positions of the azulene ring with several amines afforded the corresponding 2-aminoazulenes 3–9 in excellent yields. 2-Chloroazulene (2) without the electron-withdrawing groups reacted with highly nucleophilic cyclic amines (i.e., morpholine, piperidine and pyrrolidine) under the high-temperature conditions in a sealed tube to produce the corresponding 2-aminoazulenes 10–12 in good yields. 2-Aminoazulenes 10–14 without the electron-withdrawing groups were also obtained in good yields by the treatment of compounds 3–7 with 100% H3PO4, but in the cases of the reaction of 8 and 9 with a secondary amine function, the decomposition of the products resulted. The synthesis of 2-arylazoazulenes 15–18 was also established via the SNAr reaction of 1 with arylhydrazines. The optical and electrochemical properties of the 2-arylazoazulene derivatives were examined by UV/Vis spectroscopy, theoretical calculations and voltammetric experiments.

Liquid Microjet Measurements of the Entry of Organic Acids and Bases into Salty Water

Abstract: We explore collisions of hydrogen-bonding molecules with salty water using gas–microjet scattering experiments. Two aqueous solutions, 8 molal (m) LiBr/H2O and ∼4 m K2SO3/H2O at 253 K were exposed to seven organic gases representing different functional groups. These gases comprise weak acids (formic and acetic), weak bases (dimethylamine and piperidine), and an alcohol, ether, and ester (ethanol, dimethyl ether, and methyl formate). The scattering experiments are used to monitor the disappearance of each gas into the aqueous solutions over a ∼100 μs observation time. They demonstrate that formic acid and piperidine disappear into both solutions on almost every collision. Dimers of formic and acetic acid are also captured by the solutions on every collision, despite their pre-existing double hydrogen bonds. The methylene ring of piperidine, (CH2)5NH, also does not interfere with uptake. At the opposite extreme, methyl formate and dimethyl ether are so weakly soluble that they evaporate completely within t...

Anticholinesterase activity screening of some novel dithiocarbamate derivatives including piperidine and piperazine moieties

Abstract: GRAPHICAL ABSTRACT ABSTRACT The present study was undertaken to synthesize some novel lipophilic piperazine and piperidinedithiocarbamates and investigate their inhibitory potencies against cholinesterase enzymes. In the synthetic studies, 44 new compounds were isolated. The structures of the synthesized compounds were confirmed by spectroscopic analyses. Enzymatic studies were carried out using modified Ellman's assay against Acetylcholinesterase (AChE) and Butrylcholinesterase (BChE) enzymes, and it was observed that some of the compounds selectively inhibit AChE. Theoretical ADME predictions were calculated for selected compounds in the series. Enzyme kinetics and molecular docking studies were performed for the most active compound C41 and nature of inhibition and interactions between enzyme and ligand were explained.

Novel copolymers of styrene. 8. Fluoro, methoxy, and methyl ring-disubstituted propyl 2-cyano-3-phenyl-2-propenoates

Abstract: Novel trisubstituted ethylenes, ring-disubstituted propyl 2-cyano-3-phenyl-2-propenoates, RPhCH˭C(CN)CO2C3H7 (where R is 2-fluoro-5-methoxy, 2-fluoro-6-methoxy, 3-fluoro-4-methoxy, 4-fluoro-3-methoxy, 5-fluoro-2-methoxy, 2-fluoro-6-methyl, 3-fluoro-2-methyl, 4-fluoro-2-methyl, 4-fluoro-3-methyl, 5-fluoro-2-methyl) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and propyl cyanoacetate and characterized by CHN elemental analysis, IR, 1H- and 13C-NMR. All the ethylenes were copolymerized with styrene (M1) in solution with radical initiation (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, 1H and 13C-NMR, GPC, DSC, and TGA. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (1.4–3.0% wt.), which then decomposed in the 500–800°C range.