scispace - formally typeset
Journal ArticleDOI

Compact efficient broadband grating coupler for silicon-on-insulator waveguides.

Dirk Taillaert, +2 more
- 01 Dec 2004 - 
- Vol. 29, Iss: 23, pp 2749-2751
Reads0
Chats0
TLDR
A high-efficiency broadband grating coupler for coupling between silicon-on-insulator (SOI) waveguides and optical fibers and the size of the grooves is optimized numerically.
Abstract
We have designed a high-efficiency broadband grating coupler for coupling between silicon-on-insulator (SOI) waveguides and optical fibers. The grating is only 13 µm long and 12 µm wide, and the size of the grooves is optimized numerically. For TE polarization the coupling loss to single-mode fiber is below 1 dB over a 35-nm wavelength range when using SOI with a two-pair bottom reflector. The tolerances to fabrication errors are also calculated.

read more

Content maybe subject to copyright    Report

Citations
More filters
Journal ArticleDOI

Air-suspended SU-8 polymer waveguide grating couplers

TL;DR: In this paper, the SU-8 polymer waveguide grating couplers for TE mode with enhanced refractive index contrast by employing air as upper and lower cladding layer were successfully fabricated and characterized.
Journal ArticleDOI

Direct Imaging of Isofrequency Contours of Guided Modes in Extremely Anisotropic All-Dielectric Metasurface

TL;DR: In this paper, an all-dielectric metasurface based on the silicon on insulator platform for manipulating guided modes in the visible and near-infrared spectral ranges is investigated.
Journal ArticleDOI

Grating Couplers for Fiber-to-Fiber Characterizations of Stand-Alone Dielectric Loaded Surface Plasmon Waveguide Components

TL;DR: In this paper, the dispersion of the plasmonic Bloch modes supported by DLGs as a function of the period and the filling factor of the gratings is analyzed for fiber-to-fiber characterizations of DLSPPW components.

Silicon nitride membrane photonics

TL;DR: In this article, a novel metallic photonic crystal grating coupler is proposed to realize large area nanophotonic circuits in a silicon nitride membrane, which can be fabricated using a single lithography and etching step.
Journal ArticleDOI

3D-printed optical probes for wafer-level testing of photonic integrated circuits.

TL;DR: 3D-printed coupling elements based on 3D- printed freeform coupling elements that fit into deep-etched dicing trenches on the wafer surface represent a key step towards highly reproducible wafer-level testing of edge-coupled photonic integrated circuits.
References
More filters
Journal Article

Electromagnetic Optimization by Genetic Algorithms

TL;DR: This book describes numerous applications of genetic algorithms to the design and optimization of various low- and high-frequency electromagnetic components and provides a comprehensive list of the up-to-date references applicable to electromagneticdesign problems.
Journal ArticleDOI

Ultra-low loss photonic integrated circuit with membrane-type photonic crystal waveguides

TL;DR: The combination of an efficient two-stage coupling scheme and utilization of ultra-long (up to 2mm) photonic crystal waveguides reduces the uncertainty in determining the loss figure to 3dB/cm.
Journal ArticleDOI

An out-of-plane grating coupler for efficient butt-coupling between compact planar waveguides and single-mode fibers

TL;DR: In this paper, an out-of-plane coupler for butt-coupling from fiber to compact planar waveguides is proposed based on a short second-order grating or photonic crystal, etched in a waveguide with a low-index oxide cladding.
Journal ArticleDOI

Low loss mode size converter from 0.3 [micro sign]m square Si wire waveguides to singlemode fibres

TL;DR: In this article, a novel integrated mode size converter for single-mode Si wire waveguides is presented, which is constructed with two-dimensional tapered Si waveguide and overlaid high-index polymer waveguide.
Journal ArticleDOI

Optical modelling of photonic crystals and VCSELs using eigenmode expansion and perfectly matched layers

TL;DR: In this paper, a modeling approach for photonic crystal structures and vertical-cavity surface-emitting lasers (VCSELs) is presented based on vectorial eigenmode expansion combined with perfectly matched layer (PML) boundary conditions.
Related Papers (5)