scispace - formally typeset
Journal ArticleDOI

Crystallization and electrical resistivity of Cu2O and CuO obtained by thermal oxidation of Cu thin films on SiO2/Si substrates

Reads0
Chats0
TLDR
In this paper, the authors studied the electrical resistivity of the formed oxides in a Cu/SiO2/Si thin film after thermal oxidation by ex-situ annealing at different temperatures up to 1000°C.
About
This article is published in Thin Solid Films.The article was published on 2012-08-01. It has received 259 citations till now. The article focuses on the topics: Crystallization & Electrical resistivity and conductivity.

read more

Citations
More filters
Journal ArticleDOI

Nanostructured copper oxide semiconductors: a perspective on materials, synthesis methods and applications

TL;DR: In this article, a review of nanostructured CuxO focusing on their material properties, methods of synthesis and an overview of various applications that have been associated with the nanostructure of the oxides of copper is presented.
Journal Article

Nanostructured copper oxide semiconductors : a perspective on materials, synthesis methods and applications

TL;DR: In this paper, a review of nanostructured CuxO focusing on their material properties, methods of synthesis and an overview of various applications that have been associated with the nanostructure of the oxides of copper is presented.
Journal ArticleDOI

High-Resolution p-Type Metal Oxide Semiconductor Nanowire Array as an Ultrasensitive Sensor for Volatile Organic Compounds.

TL;DR: This study fabricated a high-resolution polycrystalline p-type MOS nanowire array with an ultrathin, high-aspect-ratio structure composed of ultrasmall grains that exhibited higher sensitivity, faster response or shorter recovery time than that of previously reported p- type MOS sensors.
Journal ArticleDOI

Current Status and Future Prospects of Copper Oxide Heterojunction Solar Cells

TL;DR: The current state of thin film heterojunction solar cells based on cuprous oxide (Cu2O), cupric oxide ( CuO) and copper (III) oxide (Co2O3) is reviewed and early stage study of Cu4O3/GaN deposited on sapphire substrate has shown a photovoltaic effect and an η of ~10−2%.
Journal ArticleDOI

A review of recent advances in transparent p-type Cu2O-based thin film transistors

TL;DR: In this paper, a review summarizes recent research on using copper oxide Cu2O thin films to produce p-type transparent thin-film transistors (TFTs) and complementary metal-oxide-semiconductor (CMOS) devices.
References
More filters
Journal ArticleDOI

Electronic structure of Cu2O and CuO

TL;DR: In this article, the electronic structure of copper oxides has been investigated by photoelectron (x-ray photoemission, ultraviolet photo-emission), Auger electron, and bremsstrahlung isochromat spectroscopies.
Journal ArticleDOI

Transport processes during the growth of oxide films at elevated temperature

TL;DR: In this article, the authors reviewed the current understanding of the growth of thermal oxide films in terms of the transport properties of the oxides and examined quantitative relationships between the film growth rate and other measurable parameters of oxides.
Journal ArticleDOI

Dilute magnetic semiconducting oxides

TL;DR: A review of recent results on transition metal doping of electronic oxides such as ZnO, TiO 2, SnO2, BaTiO 3, Cu2O, SrTiO3 and KTaO3 is presented in this article.
Journal ArticleDOI

Heterojunction solar cell with 2% efficiency based on a Cu2O substrate

TL;DR: In this article, the authors report on the fabrication of heterojunction solar cells made by deposition of transparent conducting oxide (TCO) films on Cu2O substrates, which have reached an open-circuit voltage of 0.595V, a short-ccurrent current density of 6.78mA∕cm2, a fill factor of 50%, and a conversion efficiency of 2% under simulated AM1.5G illumination.
Journal ArticleDOI

A photoelectrochemical determination of the position of the conduction and valence band edges of p‐type CuO

TL;DR: In this article, a low mobility semiconductor with an indirect band gap of 1.35 eV and a flatband potential of + 0.55 V, with respect to the saturated calomel electrode (SCE), when in contact with an electrolyte at a pH of 9.4.
Related Papers (5)