scispace - formally typeset
Journal ArticleDOI

Focused ion beam stimulated deposition of aluminum from trialkylamine alanes

M. E. Gross, +2 more
- 01 Nov 1990 - 
- Vol. 68, Iss: 9, pp 4820-4824
TLDR
In this paper, focused ion beam stimulated deposition of aluminum from trimethylamine alane, a white solid, and triethylamines, a colorless liquid, is reported.
Abstract
Focused ion beam stimulated deposition of aluminum from trimethylamine alane, a white solid, and triethylamine alane, a colorless liquid, is reported. Initiation of growth on Si and SiO2 substrates is enhanced by in situ sputter cleaning of the surface with the Ga+ beam prior to introduction of the metallo‐organic. Alternatively gas phase chemical activation with a silane coupling agent can enhance nucleation. Uniform nucleation on Al surfaces does not require any pretreatment. The Al features are electrically conducting, but incorporation of C and N from the amines leads to a resistivity approximately 300 times that of bulk Al. A qualitative model is presented that describes the balance condition for net material deposition as opposed to sputtering in terms of precursor flux and sticking probability as well as ion beam current density and beam scanning parameters. Film morphology and composition are also discussed.

read more

Citations
More filters
Journal ArticleDOI

Gas-assisted focused electron beam and ion beam processing and fabrication

TL;DR: A review of the state of the art and level of understanding of direct ion and electron beam fabrication and point out some of the unsolved problems can be found in this article, where the authors also discuss structures that are made for research purposes or for demonstration of the processing capabilities.
Journal ArticleDOI

High‐resolution focused ion beams

TL;DR: In this article, it was demonstrated that sub-micrometer focused ion beams can be produced with current densities greater than 1 A ǫ cm−2 using a liquid-metal ion source.
Journal ArticleDOI

Focused-ion-beam-induced deposition of superconducting nanowires

TL;DR: In this article, superconducting nanowires were synthesized using an ion-beam-induced deposition, with a gallium focused ion beam and tungsten carboxyl, W(CO)6, as precursor.
Journal ArticleDOI

Fundamentals of Focused Ion Beam Nanostructural Processing: Below, At, and Above the Surface

TL;DR: In this article, the authors considered the fundamentals of what happens in a solid when it is impacted by a medium-energy gallium ion and considered the FIB/sample interaction in three categories according to geometry: below, at and above the surface.
Journal ArticleDOI

Microfabrication techniques using focused ion beams and emergent applications

TL;DR: The application of focused ion beam (FIB) machining in several technologies aimed at microstructure fabrication is presented in this paper, where the ion milling of three-dimensional cavities by the exact solution of a mathematical model of the FIB deflection is demonstrated.
References
More filters
Book

Silane Coupling Agents

TL;DR: In this article, a novel organosilane coupling agent is described and its use as an adhesion promoter in mineral-filled unsaturated polymer systems is described, where the coupling agent comprises the reaction product of an isocyanatoalkyl ester of acrylic or methacrylic acid with an aminoorganosilanes.
Journal ArticleDOI

Focused ion beam induced deposition of gold

TL;DR: A finely focused ion beam is scanned over a surface on which a local gas ambient of dimethyl gold hexafluoro acetylacetonate is created by a directed miniature nozzle.
Journal ArticleDOI

Ion Beam Assisted Deposition of Metal Organic Films Using Focused Ion Beams

TL;DR: In this article, 80 nm thick films were deposited at a dose of 1×1016/cm2 and the film composition and its depth dependence was measured by Auger electron spectroscopy.
Journal ArticleDOI

Integrated circuit repair using focused ion beam milling

TL;DR: In this article, a method of repairing short circuit defects in integrated circuits using a submicron focused ion beam is described, which is applicable to cutting conductive lines in fully processed wafers, whether or not they have been encapsulated.
Related Papers (5)