scispace - formally typeset
Open AccessJournal ArticleDOI

Hydrodynamic resistance and mobility of deformable objects in microfluidic channels.

P. Sajeesh, +2 more
- 06 Oct 2014 - 
- Vol. 8, Iss: 5, pp 054112-054112
TLDR
This work reports experimental and theoretical studies of hydrodynamic behaviour of deformable objects such as droplets and cells in a microchannel, and provides a mathematical formula that correlates induced hydrod dynamic resistance of a single droplet with the droplet size and viscosity.
Abstract
This work reports experimental and theoretical studies of hydrodynamic behaviour of deformable objects such as droplets and cells in a microchannel. Effects of mechanical properties including size and viscosity of these objects on their deformability, mobility, and induced hydrodynamic resistance are investigated. The experimental results revealed that the deformability of droplets, which is quantified in terms of deformability index (D.I.), depends on the droplet-to-channel size ratio ρ and droplet-to-medium viscosity ratio λ. Using a large set of experimental data, for the first time, we provide a mathematical formula that correlates induced hydrodynamic resistance of a single droplet ΔRd with the droplet size ρ and viscosity λ. A simple theoretical model is developed to obtain closed form expressions for droplet mobility ϕ and ΔRd. The predictions of the theoretical model successfully confront the experimental results in terms of the droplet mobility ϕ and induced hydrodynamic resistance ΔRd. Numerical simulations are carried out using volume-of-fluid model to predict droplet generation and deformation of droplets of different size ratio ρ and viscosity ratio λ, which compare well with that obtained from the experiments. In a novel effort, we performed experiments to measure the bulk induced hydrodynamic resistance ΔR of different biological cells (yeast, L6, and HEK 293). The results reveal that the bulk induced hydrodynamic resistance ΔR is related to the cell concentration and apparent viscosity of the cells.

read more

Content maybe subject to copyright    Report

Citations
More filters
Journal ArticleDOI

Single step fabrication and characterization of PDMS micro lens and its use in optocapillary flow manipulation

TL;DR: In this paper, a single-step fabrication and characterization of PDMS microlens and their use in optocapillary flow manipulation is described. But the authors focus on focusing light from a low power IR laser for the manipulation of capillary flow in a microchannel.
Journal ArticleDOI

Scalable production of double emulsion drops with thin shells

TL;DR: A new microfluidic device is introduced, the aspiration device, that reduces the shell thickness of double emulsions down to 240 nm at a high throughput; thereby, the shell volume is reduced by up to 95%.
Journal ArticleDOI

Optofluidics based lab-on-chip device for in situ measurement of mean droplet size and droplet size distribution of an emulsion

TL;DR: In this article, an optofluidic device was developed for the measurement of mean droplet size and distribution of a water-in-oil emulsion. But the measurement accuracy was only 2%.
Journal ArticleDOI

Dynamics of aqueous ferrofluid droplets at coflowing liquid-liquid interface under a non-uniform magnetic field

Abstract: We report the dynamical behaviour of aqueous ferrofluid droplets (FFDs) of different sizes and concentrations at the interface of coflowing immiscible oils in a microchannel in the presence of the magnetic field. We show that the migration and sorting phenomena are governed by the interplay between magnetic force F m, non-inertial lift force F l, and interfacial tension force F i. Depending on the force ratios, namely, the lift force ratio [ K L = F l / F i] and magnetic force ratio [ K M = F m / F i], three different regimes are identified. The results also reveal that the FFD trajectory and migration length ( L m i g *) depend on the net force ratio [ F R , n e t = F m + F l / F i ] and magnet location x m *. Finally, size-based sorting of FFD is demonstrated, which shows a remarkable improvement in terms of the size range and resolution compared to when the magnetic field is not present.
Journal ArticleDOI

Entry and passage behavior of biological cells in a constricted compliant microchannel

TL;DR: Understanding of the passage of cells in compliant micro-confinements that can have significant impact on mechanophenotyping of single cells is provided.
References
More filters
Journal ArticleDOI

A continuum method for modeling surface tension

TL;DR: In this paper, a force density proportional to the surface curvature of constant color is defined at each point in the transition region; this force-density is normalized in such a way that the conventional description of surface tension on an interface is recovered when the ratio of local transition-reion thickness to local curvature radius approaches zero.
Journal ArticleDOI

Formation of dispersions using “flow focusing” in microchannels

TL;DR: In this paper, a flow-focusing geometry is integrated into a microfluidic device and used to study drop formation in liquid-liquid systems, where both monodisperse and polydisperse emulsions can be produced.
Journal ArticleDOI

Continuous inertial focusing, ordering, and separation of particles in microchannels

TL;DR: The ability to differentially order particles of different sizes, continuously, at high rates, and without external forces in microchannels is expected to have a broad range of applications in continuous bioparticle separation, high-throughput cytometry, and large-scale filtration systems.
Journal ArticleDOI

Planar chips technology for miniaturization and integration of separation techniques into monitoring systems. Capillary electrophoresis on a chip

TL;DR: In this paper, a chip-like structure for capillary electrophoresis is presented, which is based on the photolithographic technique for structures in the micrometer range.
Journal ArticleDOI

Dynamics of microfluidic droplets.

TL;DR: This critical review discusses the current understanding of the formation, transport, and merging of drops in microfluidics and focuses on the physical ingredients which determine the flow of Drops in microchannels.
Related Papers (5)