scispace - formally typeset
Journal ArticleDOI

Recovery of phenolic compounds through the decomposition of lignin in near and supercritical water

Wahyudiono, +2 more
- 01 Sep 2008 - 
- Vol. 47, Iss: 9, pp 1609-1619
TLDR
In this article, the degradation of lignin was studied in near and supercritical water at temperatures 623 and 673 K using a batch type reactor, where the effects of temperature and reaction time were combined into a single severity parameter that was used to monitor the degradation.
Abstract
Lignin as a part of wood biomass has been proposed to be an alternative source of chemical compounds for industrial applications. The degradation of lignin was studied in near and supercritical water at temperatures 623 and 673 K using a batch type reactor. The effects of temperature and reaction time were combined into a single severity parameter that was used to monitor the degradation of lignin to liquid fraction. With an increase in the reaction time at the same conditions, higher molecular weight fractions decreased and the amount of lower molecular weight fractions increased. The chemical species in liquid products and solid residues (char) were analyzed using high performance liquid chromatography with a Jasco MD-2010 Plus and Fourier transform infrared spectrophotometer, respectively. The main products in methanol soluble fraction were catechol (28.37 wt%), phenol (7.53 wt%), m,p-cresol (7.87 wt%) and o-cresol (3.80 wt%). Based on the experimental results, a reaction mechanism for the degradation of lignin was proposed. Next, optimum-operating conditions for high yields of valuable chemicals could be explored.

read more

Citations
More filters
Journal ArticleDOI

Conversion of biomass to selected chemical products

TL;DR: This critical review provides a survey illustrated by recent references of different strategies to achieve a sustainable conversion of biomass to bioproducts to examine critically the green character of conversion processes.
Journal ArticleDOI

Chemicals from lignin: an interplay of lignocellulose fractionation, depolymerisation, and upgrading

TL;DR: This review provides a summary and perspective of the extensive research that has been devoted to each of these three interconnected biorefinery aspects, ranging from industrially well-established techniques to the latest cutting edge innovations.
Journal ArticleDOI

Liquid fuels, hydrogen and chemicals from lignin: A critical review

TL;DR: In this article, the authors assess how thermochemical processes can be used to isolate lignin from the lignocellulosic biomass, and subsequently convert it to liquid fuels, hydrogen, and aromatic monomers.
Journal ArticleDOI

A review on process conditions for optimum bio-oil yield in hydrothermal liquefaction of biomass

TL;DR: The role of processing conditions including final liquefaction temperature, residence times, rate of biomass heating, size of biomass particles, type of solvent media and hydrogen donor solvents is discussed in this paper.
Journal ArticleDOI

Lignin utilization: A review of lignin depolymerization from various aspects

TL;DR: Different methods for lignin depolymerization can be divided into thermochemical treatment, mechanical treatment, chemical catalysis, and biological treatment, and their characteristics and products are extensively discussed in this article.
References
More filters
Journal ArticleDOI

Characterization of chars from pyrolysis of lignin

TL;DR: The surface area of lignin char was measured by Brunauer-Emmett-Teller method and surface morphology obtained by scanning electron microscopy (SEM).
Journal ArticleDOI

Dissolution and Hydrolysis of Cellulose in Subcritical and Supercritical Water

TL;DR: In this paper, microcrystalline cellulose decomposition experiments were conducted in subcritical and supercritical water (25 MPa, 320−400 °C, and 0.05−10.0 s).
Journal ArticleDOI

Cellulose hydrolysis in subcritical and supercritical water

TL;DR: Around the critical point, the hydrolysis rate jumps to more than an order of magnitude higher level and becomes faster than the glucose or oligomer decomposition rate and this is the reason why a high yield of Hydrolysis products in supercritical water was obtained.
Journal ArticleDOI

Biomass Gasification in Supercritical Water

TL;DR: In this paper, three different tubular flow reactors were used to produce high yields of gas with a high content of hydrogen (57 mol %) at the highest temperatures employed in this work, and all three reactors plugged after 1−2 h of use with feedstocks.
Related Papers (5)