scispace - formally typeset
Journal ArticleDOI

Reflection phase characterizations of the EBG ground plane for low profile wire antenna applications

Reads0
Chats0
TLDR
In this article, the authors focus on the reflection phase feature of EBG surfaces, which can be used to identify the input-match frequency band inside of which a low profile wire antenna exhibits a good return loss.
Abstract
Mushroom-like electromagnetic band-gap (EBG) structures exhibit unique electromagnetic properties that have led to a wide range of electromagnetic device applications. This paper focuses on the reflection phase feature of EBG surfaces: when plane waves normally illuminate an EBG structure, the phase of the reflected field changes continuously from 180/spl deg/ to -180/spl deg/ versus frequency. One important application of this feature is that one can replace a conventional perfect electric conductor (PEC) ground plane with an EBG ground plane for a low profile wire antenna design. For this design, the operational frequency band of an EBG structure is defined as the frequency region within which a low profile wire antenna radiates efficiently, namely, having a good return loss and radiation patterns. The operational frequency band is the overlap of the input-match frequency band and the surface-wave frequency bandgap. It is revealed that the reflection phase curve can be used to identify the input-match frequency band inside of which a low profile wire antenna exhibits a good return loss. The surface-wave frequency bandgap of the EBG surface that helps improve radiation patterns is very close to its input-match frequency band, resulting in an effective operational frequency band. In contrast, a thin grounded slab cannot work efficiently as a ground plane for low profile wire antennas because its surface-wave frequency bandgap and input-match frequency band do not overlap. Parametric studies have been performed to obtain design guidelines for EBG ground planes. Two novel EBG ground planes with interesting electromagnetic features are also presented. The rectangular patch EBG ground plane has a polarization dependent reflection phase and the slotted patch EBG ground plane shows a compact size.

read more

Content maybe subject to copyright    Report

Citations
More filters
Journal ArticleDOI

Embedded Wideband Metaresonator Antenna on a High-Impedance Ground Plane for Vehicular Applications

TL;DR: Very good agreement was obtained between full-wave simulation results and measurements of the reflection coefficient and radiation pattern, and the embedded multilayer ceramic antenna was fabricated using a low-temperature co-fired ceramic technique and is well suited for embedment in the armor.
Journal ArticleDOI

The Design of Broadband 60 GHz AMC Antenna in Multi-Chip RF Data Transmission

TL;DR: In this paper, a 60 GHz antenna with ground-shielded metal and a periodically-patched artificial magnetic conductor (AMC) structure is proposed to widen the reflection coefficient bandwidth.
Proceedings ArticleDOI

EBG structure to improve the B1 efficiency of stripline coil for 7 Tesla MRI

TL;DR: In this paper, an offset multilayer electromagnetic band gap (EBG) structure is utilized as a high impedance surface behind an extended half-wavelength (meandered) dipole.
Patent

Microwave monitoring of heart function

TL;DR: In this article, a plurality of antennas (24, 26, 28, 30, 32) are configured to be disposed at different, respective locations on a thorax of a living body so as to direct radio frequency (RF) electromagnetic waves from different directions toward a heart in the body and to output RF signals responsively to the waves that are scattered from the heart.
Journal ArticleDOI

Electromagnetic band gap-dipole sub-array antennas creating an enhanced tilted beams for future base station

TL;DR: In this article, a modified EBG-dipole sub-array antenna with a tilted beam for future base-station applications is presented, which can achieve a high directivity at fixed down-tilt angle.
References
More filters
Journal ArticleDOI

Negative Refraction Makes a Perfect Lens

TL;DR: The authors' simulations show that a version of the lens operating at the frequency of visible light can be realized in the form of a thin slab of silver, which resolves objects only a few nanometers across.
Journal ArticleDOI

Experimental Verification of a Negative Index of Refraction

TL;DR: These experiments directly confirm the predictions of Maxwell's equations that n is given by the negative square root ofɛ·μ for the frequencies where both the permittivity and the permeability are negative.
Journal ArticleDOI

High-impedance electromagnetic surfaces with a forbidden frequency band

TL;DR: In this paper, a new type of metallic structure has been developed that is characterized by having high surface impedance, which is analogous to a corrugated metal surface in which the corrugations have been folded up into lumped-circuit elements and distributed in a two-dimensional lattice.
Proceedings Article

Photonic crystals

TL;DR: In this paper, the authors describe photonic crystals as the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures, and the interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.
Related Papers (5)