scispace - formally typeset
Journal ArticleDOI

Reflection phase characterizations of the EBG ground plane for low profile wire antenna applications

Reads0
Chats0
TLDR
In this article, the authors focus on the reflection phase feature of EBG surfaces, which can be used to identify the input-match frequency band inside of which a low profile wire antenna exhibits a good return loss.
Abstract
Mushroom-like electromagnetic band-gap (EBG) structures exhibit unique electromagnetic properties that have led to a wide range of electromagnetic device applications. This paper focuses on the reflection phase feature of EBG surfaces: when plane waves normally illuminate an EBG structure, the phase of the reflected field changes continuously from 180/spl deg/ to -180/spl deg/ versus frequency. One important application of this feature is that one can replace a conventional perfect electric conductor (PEC) ground plane with an EBG ground plane for a low profile wire antenna design. For this design, the operational frequency band of an EBG structure is defined as the frequency region within which a low profile wire antenna radiates efficiently, namely, having a good return loss and radiation patterns. The operational frequency band is the overlap of the input-match frequency band and the surface-wave frequency bandgap. It is revealed that the reflection phase curve can be used to identify the input-match frequency band inside of which a low profile wire antenna exhibits a good return loss. The surface-wave frequency bandgap of the EBG surface that helps improve radiation patterns is very close to its input-match frequency band, resulting in an effective operational frequency band. In contrast, a thin grounded slab cannot work efficiently as a ground plane for low profile wire antennas because its surface-wave frequency bandgap and input-match frequency band do not overlap. Parametric studies have been performed to obtain design guidelines for EBG ground planes. Two novel EBG ground planes with interesting electromagnetic features are also presented. The rectangular patch EBG ground plane has a polarization dependent reflection phase and the slotted patch EBG ground plane shows a compact size.

read more

Content maybe subject to copyright    Report

Citations
More filters
Proceedings ArticleDOI

A very low profile CP EBG antenna for RFID reader

TL;DR: In this article, a compact and very low profile spiral curl antenna design is proposed using a small EBG ground plane, good circular polarization can be achieved with overall height less than 2.5% of wavelength.

Planar Beam-forming Antenna Array for 60-GHz Broadband Communication

TL;DR: In this article, the authors present a complete development cycle for millimeter-wave antenna arrays, viz modelling, design, optimisation, manufacturing, measurement and verification for three antenna prototype generations.
Journal ArticleDOI

Radiation Efficiency Issues in Planar Antennas on Electrically Thick Substrates and Solutions

TL;DR: In this article, the authors analyzed the non-monotonic dependency of the radiation efficiency of an infinitesimal horizontal electric dipole on grounded and ungrounded substrates versus the substrate electrical thickness.
Journal ArticleDOI

High-gain wideband low-profile antenna

TL;DR: When trying to increase the bandwidth of antennas based on high‐impedance surfaces, the radiation pattern tends to split near the resonance frequency of the artificial perfect magnetic conductor (PMC), so a 30% impedance bandwidth is achieved with directivity larger than 9 dB over the whole useful band.
Proceedings Article

A band-notched UWB antenna using uni-planar EBG structure

TL;DR: In this article, the effect of the meander line and the inter-digital capacitor of the unit cell is studied and a band notched UWB antenna is designed and fabricated giving a notch at 5.2 GHz WLAN frequency.
References
More filters
Journal ArticleDOI

Negative Refraction Makes a Perfect Lens

TL;DR: The authors' simulations show that a version of the lens operating at the frequency of visible light can be realized in the form of a thin slab of silver, which resolves objects only a few nanometers across.
Journal ArticleDOI

Experimental Verification of a Negative Index of Refraction

TL;DR: These experiments directly confirm the predictions of Maxwell's equations that n is given by the negative square root ofɛ·μ for the frequencies where both the permittivity and the permeability are negative.
Journal ArticleDOI

High-impedance electromagnetic surfaces with a forbidden frequency band

TL;DR: In this paper, a new type of metallic structure has been developed that is characterized by having high surface impedance, which is analogous to a corrugated metal surface in which the corrugations have been folded up into lumped-circuit elements and distributed in a two-dimensional lattice.
Proceedings Article

Photonic crystals

TL;DR: In this paper, the authors describe photonic crystals as the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures, and the interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.
Related Papers (5)