scispace - formally typeset
Journal ArticleDOI

Stretchable nanoparticle conductors with self-organized conductive pathways

Reads0
Chats0
TLDR
Stretchable conductors of polyurethane containing spherical nanoparticles deposited by either layer-by-layer assembly or vacuum-assisted flocculation are demonstrated, demonstrating the electronic tunability of mechanical properties, which arise from the dynamic self-organization of the nanoparticles under stress.
Abstract
Research in stretchable conductors is fuelled by diverse technological needs. Flexible electronics, neuroprosthetic and cardiostimulating implants, soft robotics and other curvilinear systems require materials with high conductivity over a tensile strain of 100 per cent (refs 1-3). Furthermore, implantable devices or stretchable displays need materials with conductivities a thousand times higher while retaining a strain of 100 per cent. However, the molecular mechanisms that operate during material deformation and stiffening make stretchability and conductivity fundamentally difficult properties to combine. The macroscale stretching of solids elongates chemical bonds, leading to the reduced overlap and delocalization of electronic orbitals. This conductivity-stretchability dilemma can be exemplified by liquid metals, in which conduction pathways are retained on large deformation but weak interatomic bonds lead to compromised strength. The best-known stretchable conductors use polymer matrices containing percolated networks of high-aspect-ratio nanometre-scale tubes or nanowires to address this dilemma to some extent. Further improvements have been achieved by using fillers (the conductive component) with increased aspect ratio, of all-metallic composition, or with specific alignment (the way the fillers are arranged in the matrix). However, the synthesis and separation of high-aspect-ratio fillers is challenging, stiffness increases with the volume content of metallic filler, and anisotropy increases with alignment. Pre-strained substrates, buckled microwires and three-dimensional microfluidic polymer networks have also been explored. Here we demonstrate stretchable conductors of polyurethane containing spherical nanoparticles deposited by either layer-by-layer assembly or vacuum-assisted flocculation. High conductivity and stretchability were observed in both composites despite the minimal aspect ratio of the nanoparticles. These materials also demonstrate the electronic tunability of mechanical properties, which arise from the dynamic self-organization of the nanoparticles under stress. A modified percolation theory incorporating the self-assembly behaviour of nanoparticles gave an excellent match with the experimental data.

read more

Citations
More filters
Journal ArticleDOI

Strain- and Strain-Rate-Invariant Conductance in a Stretchable and Compressible 3D Conducting Polymer Foam

TL;DR: In this article, a 3D-structured polymeric material with conductance that has zero dependence on tensile and compressive strain over an 80% strain range and a strain rate from 2.5% to 2.560% was presented.
Journal ArticleDOI

Recent Advances of Wearable Antennas in Materials, Fabrication Methods, Designs, and Their Applications: State-of-the-Art

TL;DR: This article attempts to critically review the wearable antennas especially in light of new materials and fabrication methods, and novel designs, such asminiaturized button antennas and miniaturized single and multi-band antennas, and their unique smart applications in WBAN.
Journal ArticleDOI

Porous Polydimethylsiloxane–Silver Nanowire Devices for Wearable Pressure Sensors

TL;DR: In this article, a non-lithographic method for fabricating piezoresistive pressure sensors with a broad range of working pressures and low detection limit is presented, and a wearable pressure sensor is presented.
Journal ArticleDOI

Recent Advances and Opportunities of Active Materials for Haptic Technologies in Virtual and Augmented Reality

TL;DR: The current status and opportunities of active material‐based haptic technology with a focus on VR/AR applications are reviewed and the state‐of‐the‐art haptic interfaces that are relevant to the materials are highlighted with an aim to provide perspectives on the role of active materials and their potential integration in haptic devices.
References
More filters
Journal ArticleDOI

Carbon Nanotubes--the Route Toward Applications

TL;DR: Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects.
Journal ArticleDOI

Fuzzy Nanoassemblies: Toward Layered Polymeric Multicomposites

TL;DR: In this article, a general approach for multilayers by consecutive adsorption of polyanions and polycations has been proposed and has been extended to other materials such as proteins or colloids.
Journal ArticleDOI

Materials and mechanics for stretchable electronics

TL;DR: Inorganic and organic electronic materials in microstructured and nanostructured forms, intimately integrated with elastomeric substrates, offer particularly attractive characteristics, with realistic pathways to sophisticated embodiments, and applications in systems ranging from electronic eyeball cameras to deformable light-emitting displays are described.
Journal ArticleDOI

Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes

TL;DR: Transparent, conducting spray-deposited films of single-walled carbon nanotubes are reported that can be rendered stretchable by applying strain along each axis, and then releasing this strain.
Journal ArticleDOI

Stretchable active-matrix organic light-emitting diode display using printable elastic conductors

TL;DR: The manufacture of printable elastic conductors comprising single-walled carbon nanotubes (SWNTs) uniformly dispersed in a fluorinated rubber is described, which is constructed a rubber-like stretchable active-matrix display comprising integrated printed elastic conductor, organic transistors and organic light-emitting diodes.
Related Papers (5)