Journal ArticleDOI
Thermomechanical processing of advanced high strength steels
Jingwei Zhao,Zhengyi Jiang +1 more
TLDR
A comprehensive review of recent progress in TMP of AHSSs, with focus on the processing-microstructure-property relationships of the processed AHSS, is provided in this paper.About:
This article is published in Progress in Materials Science.The article was published on 2018-05-01. It has received 251 citations till now.read more
Citations
More filters
Journal ArticleDOI
Effect of ultrafine microstructure on interdiffusion-driven phase transformations in Ni-Sn sandwich diffusion couples
TL;DR: In this paper , a novel sandwich diffusion couple approach was utilized to demonstrate the effects of microstructure on interdiffusion-driven phase formation in the Ni-Sn system, and two sandwich diffusion couples were prepared for phase growth analysis at each interface after annealing at 200 °C for 96 h.
Journal ArticleDOI
Stress and Deformation Distribution and Microstructure Changes Around Pin-Loaded Holes in Medium Manganese Steel Plates
TL;DR: In this article, the effects of traction load, plate thickness, and pin radius on stress and deformation distribution were investigated by simulation symmetrical pin traction experiment and analytical calculation methods.
Journal ArticleDOI
Effects of annealing temperature on micro deep drawing of stainless steel-copper composite
TL;DR: In this article , the deformation behavior of two-layer stainless steel-copper composite foils during micro-deep drawing (MDD) was studied and the results showed that complete circular cups cannot be formed using the as-received material due to its poor formability.
Journal ArticleDOI
Effects of Thermomechanical Processing on Hydrogen Embrittlement Properties of UltraHigh-Strength TRIP-Aided Bainitic Ferrite Steels
TL;DR: In this article , the effects of thermomechanical processing on the microstructure and hydrogen embrittlement properties of ultrahigh-strength, low-alloy, transformation-induced plasticity (TRIP)-aided bainitic ferrite (TBF) steels were investigated to apply to automobile forging parts such as engine and drivetrain parts.
Journal ArticleDOI
Copper-Induced Strengthening in 0.2 C Bainite Steel.
TL;DR: In this article, the authors investigated the Cu precipitation potential during prolonged isothermal bainitization treatment and found that the presence of Mn did not cause an Mn-Cu precipitation strengthening synergy, observed previously during martensite tempering procedure.
References
More filters
Journal ArticleDOI
The Deformation and Ageing of Mild Steel: III Discussion of Results
TL;DR: In this paper, an attempt is made to explain the observed phenomena in the yielding and ageing of mild steel, described in two previous papers, in the general terms of a grain-boundary theory.
Journal ArticleDOI
Current issues in recrystallization: a review
Roger D. Doherty,D.A. Hughes,F.J. Humphreys,John J. Jonas,D. Juul Jensen,Michael E. Kassner,Wayne E. King,Terry R. McNelley,H.J. McQueen,Anthony D. Rollett +9 more
TL;DR: The current understanding of the fundamentals of recrystallization is summarized in this paper, which includes understanding the as-deformed state, nucleation and growth, the development of misorientation during deformation, continuous, dynamic, and geometric dynamic recystallization, particle effects, and texture.
Journal ArticleDOI
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
TL;DR: In this paper, the evolution of the new microstructures produced by two types of dynamic recrystallization is reviewed, including those brought about by severe plastic deformation (SPD).