Open AccessBook
Tribology: Friction and Wear of Engineering Materials
TLDR
In this paper, surface topography and surfaces in contact are discussed, as well as surface engineering in tribology, materials for bearings and sliding wear by hard particles, friction and friction.Abstract:
Preface * Introduction * Surface topography and surfaces in contact * Friction * Lubricants and lubrication * Sliding wear * Wear by hard particles * Wear and design * Surface engineering in tribology * Materials for bearings * Author index * Subject index.read more
Citations
More filters
Journal ArticleDOI
Mechanical properties and scratch test studies of new ultra-hard AlMgB14 modified by TiB2
TL;DR: In this paper, the abrasion resistance of AlMgB14 composites with varying amounts of TiB2 has been studied using single-point diamond scratch tests with loads ranging from 20 to 70 n in 10 n increments.
Journal ArticleDOI
Sliding wear behavior of Cu50Hf41.5Al8.5 bulk metallic glass
TL;DR: In this article, the sliding wear behavior of a copper-based bulk metallic glass (Cu 50 Hf 41.5 Al 8.5 ) was investigated for both as-cast and annealed samples.
Journal ArticleDOI
Friction and wear behavior of self-lubricating and heavily loaded metal–PTFE composites
Dinghan Xiang,Kunlun Shan +1 more
TL;DR: In this paper, a new 16 MnNb steel-PTFE composite (A) containing 60% area proportion of PTFE composites was developed and another type of common solid lubricant embedded C86300 bronze composite (B) was selected for a comparative investigation under similar testing conditions.
Journal ArticleDOI
Microstructure and Wear Properties of Electron Beam Melted Ti-6Al-4V Parts: A Comparison Study against As-Cast Form
TL;DR: In this article, powder-bed-based electron beam melting (EBM) was used to additively manufacture Ti-6Al-4V (Ti64) parts of varying thicknesses.
Journal ArticleDOI
Dry sliding wear behavior of aluminum based hybrid composites with graphite nanofiber–alumina fiber
TL;DR: In this article, the wear behavior of aluminum based hybrid composites reinforced with graphite nanofiber (GNF) and alumina short fiber (Al2O3sf) in different volume fraction of fibers (10, 15% and 20%) was studied under dry sliding conditions.