Institution
University of Maribor
Education•Maribor, Slovenia•
About: University of Maribor is a education organization based out in Maribor, Slovenia. It is known for research contribution in the topics: Population & KEKB. The organization has 3987 authors who have published 13077 publications receiving 258339 citations. The organization is also known as: Univerza v Mariboru.
Papers published on a yearly basis
Papers
More filters
••
TL;DR: There are numerous orthopaedic applications of threeD printing for the pelvis and acetabulum and custom-made metal 3D printed patient-specific implants and instruments are increasingly being studied for pelvic oncologic resection and reconstruction of resected defects as well as for revision hip arthroplasties with favourable results.
Abstract: There are numerous orthopaedic applications of three-dimensional (3D) printing for the pelvis and acetabulum. The authors reviewed recently published articles and summarized their experience. 3D printed anatomical models are particularly useful in pelvic and acetabular fracture surgery for planning, implant templating and for anatomical assessment of pathologies such as CAM-type femoroacetabular impingement and rare deformities. Custom-made metal 3D printed patient-specific implants and instruments are increasingly being studied for pelvic oncologic resection and reconstruction of resected defects as well as for revision hip arthroplasties with favourable results. This article also discusses cost-effectiveness considerations when preparing pelvic 3D printed models from a hospital 3D printing centre.
73 citations
••
TL;DR: It is found that the successful use of frameworks is mainly dependent on two factors: continuous framework usage intention and the perceived usefulness of the framework.
73 citations
••
TL;DR: In this article, a numerical model for determining the pitting resistance of gear teeth flanks is presented, which considers the material fatigue process leading to pitting, i.e. the conditions required for crack initiation and then simulation of fatigue crack propagation.
Abstract: — A numerical model for determining the pitting resistance of gear teeth flanks is presented in this paper. The model considers the material fatigue process leading to pitting, i.e. the conditions required for crack initiation and then simulation of fatigue crack propagation. The theory of dislocation motion on persistent slip bands is used to describe the process of crack initiation, where the microstructure of a material plays a crucial role. The simulation of crack growth takes into account both short crack growth, where the modified Bilby, Cottrell and Swinden model is used for simulation of dislocation motion, and long crack growth, where the theory of linear elastic fracture mechanics is applied. The stress field in the contact area of meshing spur gear teeth and the functional relationship between the stress intensity factor and crack length are determined by the finite element method. For numerical simulations of crack initiation and crack propagation in the contact area of spur gear teeth, an equivalent model of two cylinders is used. On the basis of numerical results, and with consideration of some particular material parameters, the service life of gear teeth flanks is estimated. The developed model is applied to a real spur gear pair, which is also experimentally tested. The comparison of numerical and experimental results shows good agreement and it can be concluded that the developed model is appropriate for determining the pitting resistance of gear teeth flanks.
73 citations
••
TL;DR: In this paper, the corrosion inhibition efficiency of certain azoles for C15 grade mild steel in 3.5% NaCl solution by employing immersion tests and different electrochemical techniques was analyzed.
73 citations
••
TL;DR: In this paper, measurements of the kinematic distributions of J/ψ mesons produced in p-C, p-Ti and p-W collisions at the HERA-B experiment at the DESY laboratory are presented.
Abstract: Measurements of the kinematic distributions of J/ψ mesons produced in p–C, p–Ti and p–W collisions at $\sqrt{s}=41.6~\mathrm{GeV}$
in the Feynman-x region −0.34
73 citations
Authors
Showing all 4077 results
Name | H-index | Papers | Citations |
---|---|---|---|
Ignacio E. Grossmann | 112 | 776 | 46185 |
Mirjam Cvetič | 89 | 456 | 27867 |
T. Sumiyoshi | 88 | 855 | 62277 |
M. Bračko | 87 | 738 | 30195 |
Xin-She Yang | 85 | 444 | 61136 |
Matjaž Perc | 84 | 400 | 22115 |
Baowen Li | 83 | 477 | 23080 |
S. Nishida | 82 | 678 | 27709 |
P. Križan | 78 | 749 | 26408 |
S. Korpar | 78 | 615 | 23802 |
Attila Szolnoki | 76 | 231 | 20423 |
H. Kawai | 76 | 477 | 22713 |
John Shawe-Taylor | 72 | 503 | 52369 |
Matjaz Perc | 57 | 148 | 12886 |
Mitja Lainscak | 55 | 287 | 22004 |