Journal ArticleDOI
3D Printing of Polymer Nanocomposites via Stereolithography
TLDR
In this paper, the application of stereolithography (SLA) for polymer nanocomposites fabrication is discussed, and the potential of the technology's potential in increasing the applicability of current SLA-printed parts.Abstract:
Additive manufacturing (AM) is still underutilized as an industrial process, but is quickly gaining momentum with the development of innovative techniques and materials for various applications. In particular, stereolithography (SLA) is now shifting from rapid prototyping to rapid manufacturing, but is facing challenges in parts performance and printing speed, among others. This review discusses the application of SLA for polymer nanocomposites fabrication to show the technology's potential in increasing the applicability of current SLA-printed parts. Photopolymerization chemistry, nanocomposite preparation, and applications in various industries are also explained to provide a comprehensive picture of the current and future capabilities of the technique and materials involved.read more
Citations
More filters
Journal ArticleDOI
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
TL;DR: A comprehensive review of the main 3D printing methods, materials and their development in trending applications was carried out in this paper, where the revolutionary applications of AM in biomedical, aerospace, buildings and protective structures were discussed.
Journal ArticleDOI
Mechanical characterization of 3D-printed polymers
John Ryan C. Dizon,John Ryan C. Dizon,Alejandro H. Espera,Alejandro H. Espera,Qiyi Chen,Rigoberto C. Advincula +5 more
TL;DR: In this article, the authors provide a brief discussion about additive manufacturing and also the most employed additive manufacturing technologies for polymers, specifically, properties under different loading types such as tensile, bending, compressive, fatigue, impact and others.
Journal ArticleDOI
FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments.
TL;DR: The most common defects on printed parts, in particular the void formation, surface roughness and poor bonding between fibre and matrix, are explored and an inclusive discussion on the effectiveness of chemical, laser, heat and ultrasound treatments to minimize these drawbacks is provided.
Journal ArticleDOI
Additive manufacturing technology for porous metal implant applications and triple minimal surface structures: A review.
Li Yuan,Songlin Ding,Cuie Wen +2 more
TL;DR: This review explores open-cellular structural design for porous metal implant applications, in relation to the mechanical properties, biocompatibility, and biodegradability, of metal implants with an enhanced biomorphic environment.
A review on stereolithography and its applications in biomedical engineering
TL;DR: Stereolithography is a solid freeform technique (SFF) that was introduced in the late 1980s as discussed by the authors, which has the highest fabrication accuracy and an increasing number of materials that can be processed is becoming available.
References
More filters
Journal ArticleDOI
Ultrastructural Characterization of the Lower Motor System in a Mouse Model of Krabbe Disease.
Valentina Cappello,Laura Marchetti,Paola Parlanti,Paola Parlanti,Silvia Landi,Ilaria Tonazzini,Marco Cecchini,Vincenzo Piazza,Mauro Gemmi +8 more
TL;DR: The data further characterize the ultrastructural analysis of the KD mouse model, and support recent theories of a dying-back mechanism for neuronal degeneration, which is independent of demyelination.
Journal ArticleDOI
Continuous liquid interface production of 3D objects
John R. Tumbleston,David Shirvanyants,Nikita Ermoshkin,Rima Janusziewicz,Ashley R. Johnson,David L. Kelly,Kai Chen,Robert Pinschmidt,Jason P. Rolland,Alexander Ermoshkin,Edward T. Samulski,Joseph M. DeSimone,Joseph M. DeSimone +12 more
TL;DR: The continuous generation of monolithic polymeric parts up to tens of centimeters in size with feature resolution below 100 micrometers is demonstrated and critical control parameters are delineated and shown that complex solid parts can be drawn out of the resin at rates of hundreds of millimeters per hour.
Journal ArticleDOI
A review on stereolithography and its applications in biomedical engineering
TL;DR: Stereolithography is a solid freeform technique (SFF) that was introduced in the late 1980s as mentioned in this paper, and it has been widely used in biomedical applications, as well as the biodegradable resin materials developed for use with stereolithography.
Journal ArticleDOI
Nanoscale Size Effect of Magnetic Nanocrystals and Their Utilization for Cancer Diagnosis via Magnetic Resonance Imaging
Young-wook Jun,Yong Min Huh,Jin Sil Choi,Jae Hyun Lee,Ho Taek Song,Sungjun Kim,Sarah Yoon,Kyung-Sup Kim,Jeon Soo Shin,Jin Suck Suh,Jinwoo Cheon +10 more
TL;DR: The development of a synthetically controlled magnetic nanocrystal model system that correlates the nanoscale tunabilities in terms of size, magnetism, and induced nuclear spin relaxation processes led to the development of high-performance Nanocrystal-antibody probe systems for the diagnosis of breast cancer cells via magnetic resonance imaging.
Journal ArticleDOI
Nanocomposites: synthesis, structure, properties and new application opportunities
TL;DR: In this article, a unified overview of matrix nanocomposites is presented underlining the need for these materials, their processing methods and some recent results on structure, properties and potential applications, perspectives including need for such materials in future space mission and other interesting applications together with market and safety aspects.