Journal ArticleDOI
Electromagnetic interference (EMI) of system-on-package (SOP)
Reads0
Chats0
TLDR
In this paper, the authors discuss the design and development of system-on-package (SOP) integrated high-performance digital LSIs and for radio frequency (RF) and analog circuits.Abstract:
Electromagnetic interference (EMI) issues are expected to be crucial for next-generation system-on-package (SOP) integrated high-performance digital LSIs and for radio frequency (RF) and analog circuits. Ordinarily in SOPs, high-performance digital LSIs are sources of EMI, while RF and analog circuits are affected by EMI (victims). This paper describes the following aspects of EMI in SOPs: 1) die/package-level EMI; 2) substrate-level EMI; 3) electromagnetic modeling and simulation; and 4) near electromagnetic field measurement. First, LSI designs are discussed with regard to radiated emission. The signal-return path loop and switching current in the power/ground line are inherent sources of EMI. The EMI of substrate, which work as coupling paths or unwanted antennas, is described. Maintaining the return current path is an important aspect of substrate design for suppressing EMI and for maintaining signal integrity (SI). In addition, isolating and suppressing the resonance of the DC power bus in a substrate is another important design aspect for EMI and for power integrity (PI). Various electromagnetic simulation methodologies are introduced as indispensable design tools for achieving high-performance SOPs without EMI problems. Measurement techniques for near electric and magnetic fields are explained, as they are necessary to confirm the appropriateness of designs and to investigate the causes of EMI problems. This paper is expected to be useful in the design and development of SOPs that take EMI into consideration.read more
Citations
More filters
Journal ArticleDOI
Analysis and Application of an On-Package Planar Inverted-F Antenna
TL;DR: An on-package planar inverted-F antenna (PIFA) consists of a single folded metal plate and has several advantages, including small size, light weight, low cost, and ease of fabrication.
Journal ArticleDOI
Impedance Matching of Traces and Multilayer via Transitions for On-Package Links
TL;DR: In this article, a method for impedance matching between traces and multilayer via transitions in on-package chip-to-chip links is presented, which allows determining of the geometry for minimizing the return loss when a signal propagates through the link.
Journal ArticleDOI
A Novel Package Lid Using Mushroom-Type EBG Structures for Unintentional Radiation Mitigation
TL;DR: In this paper, a novel package lid is proposed based on the gap waveguide theory, which adopts mushroom-type electromagnetic bandgap structures to mitigate the increased unintentional emission, and a scalable equivalent circuit model is presented as an assistance for designing the proposed package lid.
Journal ArticleDOI
Shielded-Loop-Type Onchip Magnetic-Field Probe to Evaluate Radiated Emission From Thin-Film Noise Suppressor
TL;DR: In this paper, a silicon integrated RF magnetic field probe has been designed and microfabricated using CMOS-silicon-on-insulator (SOI) technology with a 0.15mum design rule on a high-resistivity silicon substrate.
Journal ArticleDOI
Suppressing Electromagnetic Radiation by Trapping Ferrite Nanoparticles and Carbon Nanotubes in Hierarchical Nanoporous Structures Designed by Crystallization‐Induced Phase Separation
TL;DR: In this paper, a unique approach was adopted to prepare ultra-thin (500 mu m), flexible, lightweight composite membranes wherein hierarchical nanoporous structures were initially developed by crystallization induced phase separation in a classical upper critical solution temperature (UCST) pair Polyvinylidene fluoride/poly methyl methacrylate (PVDF/PMMA) and subsequently etching out the PMMA phase.
References
More filters
Journal ArticleDOI
A perfectly matched layer for the absorption of electromagnetic waves
TL;DR: Numerical experiments and numerical comparisons show that the PML technique works better than the others in all cases; using it allows to obtain a higher accuracy in some problems and a release of computational requirements in some others.
Book
Introduction to Electromagnetic Compatibility
TL;DR: In this paper, the authors present the Phasor Solution Method for calculating per-unit-length parameters and Crosstalk of multiconductor transmission lines for EMC systems.
Book
Advances in Computational Electrodynamics: The Finite-Difference Time-Domain Method
TL;DR: A survey of the Finite-Difference Time Domain literature can be found in this article, where the authors present a set of techniques for time-domain analysis using multiresolution expansions.
Journal ArticleDOI
High-frequency characterization of power/ground-plane structures
TL;DR: In this article, the authors describe a strategy to characterize power and groundplane structures using a full cavity-mode frequency-domain resonator model, and introduce a novel technique to suppress modal impedances, minimizing both transfer and input impedances.
Journal ArticleDOI
Power bus decoupling on multilayer printed circuit boards
TL;DR: In this article, a decoupling strategy for multilayer boards must account for the low inductance and relatively high capacitance of the power bus, which is not appropriate for one-sided or two-sided printed circuit boards.