scispace - formally typeset
Journal ArticleDOI

Improvement of photoelectrochemical hydrogen generation by surface modification of p-type silicon semiconductor photocathodes

Reads0
Chats0
TLDR
In this article, the improvement of H/sub 2/ evolution from two different types of catalytic p-type photocathode surfaces has been examined, and a comparison of the naked p-Si, the simply platinized, and the (PQ/sup 2 +//sup ///sup +/.)sub n/.nPt(0))/sub surf/ system compared to the same surface directly platinised confirm an important difference in the mechanism of H /sub 2 / evolution catalysis for the two surface catalyst systems.
Abstract
The improvement of H/sub 2/ evolution from two different types of catalytic p-type photocathode surfaces has been examined. p-Type Si has been platinized by phtotelectrochemically plating Pt(0) onto the Si surface. Such a photocathode shows significant improvement (compared to naked p-type Si) for photochemical H/sub 2/ evolution with respect to output photovoltage, fill factor, and overall efficiency. Such photocathodes having an optimun amount of Pt(0) give a pH-dependent output voltage with respect to the H/sub 2/O/H/sub 2/ couple, but the dependence is not a simple 59-mV/pH dependence. No pH dependence would be expected if Pt(0) formed a Schottky barrier when plated onto p-type Si. A second kind of H/sub 2/ evolution catalyst has been confined to the surface of p-type Si. Polymeric quantities of an electroactive N,N'-dialkyl-4,4'-bipridinium reagent, (PQ/sup 2 +/.)/sub n/, have been confined to the surface. The Br/sup -/ counterions of the polymer are then exchanged by PtCl/sub 6//sup 2 -/. Photoreduction then yields Pt(0) dispersed in the polymer. Such a surface is again significantly improved compared to naked p-type Si with respect to H/sub 2/ evolution. A comparison of the naked p-Si, the simply platinized, and the (PQ/sup 2 +//sup ///sup +//sub n/.nPt(0))/sub surf./ system is mademore » and contrasted to the expected behavior of an external Schottky barrier photocell driving an electrolysis cell with a Pt cathode. Experiments with n-type MoS/sub 2/, n-type Si, Pt, Au, and W cathodes functionalized with the (PQ/sup 2 +//sup ///sup +/.)sub n/.nPt(0))/sub surf./ system compared to the same surface directly platinized confirm an important difference in the mechanism of H/sub 2/ evolution catalysis for the two surface catalyst systems. p-Type Si modified with optimum amounts of Pt(0) by direct platinization appears to give improved H/sub 2/ evolution efficiency by a mechanism where the Pt(0) serves as a catalyst that does not alter the interface energetics of the semiconductor.« less

read more

Citations
More filters
Journal ArticleDOI

Solar Water Splitting Cells

TL;DR: The biggest challenge is whether or not the goals need to be met to fully utilize solar energy for the global energy demand can be met in a costeffective way on the terawatt scale.
Journal ArticleDOI

Amorphous Molybdenum Sulfide Catalysts for Electrochemical Hydrogen Production: Insights into the Origin of their Catalytic Activity

TL;DR: In this article, a scalable wet chemical synthesis for a catalytically active nanostructured amorphous molybdenum sulfide material was presented, which achieved a current density of 10 mA/cm2 at ∼200 mV overpotential.
Journal ArticleDOI

Photochemical and Photoelectrochemical Reduction of CO2

TL;DR: Energy gap matching for reduction of CO(2) to different products, including CO, formic acid, and methanol, is used to identify the most promising systems.
Journal ArticleDOI

Photoelectrochemical cells for solar hydrogen production: current state of promising photoelectrodes, methods to improve their properties, and outlook

TL;DR: In this article, a review focusing on recent developments of some promising photoelectrode materials, such as BiVO4, a-Fe2O3, TaON, and Ta3N5 for solar hydrogen production is presented.
Journal ArticleDOI

Will Solar-Driven Water-Splitting Devices See the Light of Day?

TL;DR: In this paper, the major design constraints that motivate continued research in the field of solar-driven water splitting are summarized, and key device components that are now available for use in demonstration systems and prototypes.
Related Papers (5)