Showing papers on "Catalysis published in 2006"
TL;DR: Hydrogen Production by Water−Gas Shift Reaction 4056 4.1.
Abstract: 1.0. Introduction 4044 2.0. Biomass Chemistry and Growth Rates 4047 2.1. Lignocellulose and Starch-Based Plants 4047 2.2. Triglyceride-Producing Plants 4049 2.3. Algae 4050 2.4. Terpenes and Rubber-Producing Plants 4052 3.0. Biomass Gasification 4052 3.1. Gasification Chemistry 4052 3.2. Gasification Reactors 4054 3.3. Supercritical Gasification 4054 3.4. Solar Gasification 4055 3.5. Gas Conditioning 4055 4.0. Syn-Gas Utilization 4056 4.1. Hydrogen Production by Water−Gas Shift Reaction 4056
7,067 citations
TL;DR: The results of this study show that heteroatomic polymers can be used not only to stabilize the non-precious metal in the acidic environment of the PEFC cathode but also to generate active sites for oxygen reduction reaction.
Abstract: Fuel cells, as devices for direct conversion of the chemical energy of a fuel into electricity by electrochemical reactions, are among the key enabling technologies for the transition to a hydrogen-based economy. Of several different types of fuel cells under development today, polymer electrolyte fuel cells (PEFCs) have been recognized as a potential future power source for zero-emission vehicles. However, to become commercially viable, PEFCs have to overcome the barrier of high catalyst cost caused by the exclusive use of platinum and platinum-based catalysts in the fuel-cell electrodes. Here we demonstrate a new class of low-cost (non-precious metal)/(heteroatomic polymer) nanocomposite catalysts for the PEFC cathode, capable of combining high oxygen-reduction activity with good performance durability. Without any optimization, the cobalt-polypyrrole composite catalyst enables power densities of about 0.15 W cm(-2) in H2-O2 fuel cells and displays no signs of performance degradation for more than 100 hours. The results of this study show that heteroatomic polymers can be used not only to stabilize the non-precious metal in the acidic environment of the PEFC cathode but also to generate active sites for oxygen reduction reaction.
1,933 citations
TL;DR: It is shown that Au/Pd-TiO2 catalysts give very high turnover frequencies (up to 270,000 turnovers per hour) for the oxidation of alcohols, including primary alkyl alcohols and the addition of Au to Pd nanocrystals improved the overall selectivity.
Abstract: The oxidation of alcohols to aldehydes with O2 in place of stoichiometric oxygen donors is a crucial process for the synthesis of fine chemicals. However, the catalysts that have been identified so far are relatively inactive with primary alkyl alcohols. We showed that Au/Pd-TiO2 catalysts give very high turnover frequencies (up to 270,000 turnovers per hour) for the oxidation of alcohols, including primary alkyl alcohols. The addition of Au to Pd nanocrystals improved the overall selectivity and, using scanning transmission electron microscopy combined with x-ray photoelectron spectroscopy, we showed that the Au-Pd nanocrystals were made up of a Au-rich core with a Pd-rich shell, indicating that the Au electronically influences the catalytic properties of Pd.
1,907 citations
TL;DR: In this paper, the functionalization of C-H bonds in complex organic substrates catalyzed by transition metal catalysts is studied and the key concepts and approaches aimed at achieving selectivity in complex settings are discussed.
Abstract: Direct and selective replacement of carbon-hydrogen bonds with new bonds (such as C-C, C-O, and C-N) represents an important and long-standing goal in chemistry. These transformations have broad potential in synthesis because C-H bonds are ubiquitous in organic substances. At the same time, achieving selectivity among many different C-H bonds remains a challenge. Here, we focus on the functionalization of C-H bonds in complex organic substrates catalyzed by transition metal catalysts. We outline the key concepts and approaches aimed at achieving selectivity in complex settings and discuss the impact these reactions have on synthetic planning and strategy in organic synthesis.
1,812 citations
TL;DR: The direct synthesis of H 2O2 from O2 and H2 using a variety of catalysts, and the factors influencing the formation and decomposition of H2O2 are examined in detail in this Review.
Abstract: Hydrogen peroxide (H2O2) is widely used in almost all industrial areas, particularly in the chemical industry and environmental protection. The only degradation product of its use is water, and thus it has played a large role in environmentally friendly methods in the chemical industry. Hydrogen peroxide is produced on an industrial scale by the anthraquinone oxidation (AO) process. However, this process can hardly be considered a green method. It involves the sequential hydrogenation and oxidation of an alkylanthraquinone precursor dissolved in a mixture of organic solvents followed by liquid–liquid extraction to recover H2O2. The AO process is a multistep method that requires significant energy input and generates waste, which has a negative effect on its sustainability and production costs. The transport, storage, and handling of bulk H2O2 involve hazards and escalating expenses. Thus, novel, cleaner methods for the production of H2O2 are being explored. The direct synthesis of H2O2 from O2 and H2 using a variety of catalysts, and the factors influencing the formation and decomposition of H2O2 are examined in detail in this Review.
1,773 citations
TL;DR: The compound (C6H2Me3)2PH(C 6F4)BH(C6F5)2 (Me, methyl), which is derived through an unusual reaction involving dimesitylphosphine substitution at a para carbon of tris(pentafluorophenyl) borane, cleanly loses H2 at temperatures above 100°C.
Abstract: Although reversible covalent activation of molecular hydrogen (H2) is a common reaction at transition metal centers, it has proven elusive in compounds of the lighter elements. We report that the compound (C6H2Me3)2PH(C6F4)BH(C6F5)2 (Me, methyl), which we derived through an unusual reaction involving dimesitylphosphine substitution at a para carbon of tris(pentafluorophenyl) borane, cleanly loses H2 at temperatures above 100°C. Preliminary kinetic studies reveal this process to be first order. Remarkably, the dehydrogenated product (C6H2Me3)2P(C6F4)B(C6F5)2 is stable and reacts with 1 atmosphere of H2 at 25°C to reform the starting complex. Deuteration studies were also carried out to probe the mechanism.
1,617 citations
TL;DR: More than 100 articles related to anode catalysts for the direct methanol fuel cell (DMFC) are reviewed, mainly focusing on the three most active areas: (1) progress in preparation methods of Pt-Ru catalysts with respect to activity improvement and utilization optimization; (2) preparation of novel carbon materials as catalyst supports to create a highly dispersed and stably supported catalysts; (3) exploration of new catalysts having a low noble metal content and non-noble metal elements through fast activity down-selection methods such as combinatorial methods.
1,607 citations
TL;DR: This review documents the structural and mechanistic features that contribute to high enantioselectivity in hydrogen-bond-mediated catalytic processes in small-molecule, synthetic catalyst systems.
Abstract: Hydrogen bonding is responsible for the structure of much of the world around us. The unusual and complex properties of bulk water, the ability of proteins to fold into stable three-dimensional structures, the fidelity of DNA base pairing, and the binding of ligands to receptors are among the manifestations of this ubiquitous noncovalent interaction. In addition to its primacy as a structural determinant, hydrogen bonding plays a crucial functional role in catalysis. Hydrogen bonding to an electrophile serves to decrease the electron density of this species, activating it toward nucleophilic attack. This principle is employed frequently by Nature's catalysts, enzymes, for the acceleration of a wide range of chemical processes. Recently, organic chemists have begun to appreciate the tremendous potential offered by hydrogen bonding as a mechanism for electrophile activation in small-molecule, synthetic catalyst systems. In particular, chiral hydrogen-bond donors have emerged as a broadly applicable class of catalysts for enantioselective synthesis. This review documents these advances, emphasizing the structural and mechanistic features that contribute to high enantioselectivity in hydrogen-bond-mediated catalytic processes.
1,580 citations
TL;DR: In this paper, the synthesis of novel 3D flower-like iron oxide nanostructures by an ethylene glycol (EG)-mediated self-assembly process is reported, which can be used to further understand the mechanism of self-organization and expand the applications of IR nanomaterials.
Abstract: 3D nanostructures have attracted much attention because of their unique properties and potential applications. The simplest synthetic route to 3D nanostructures is probably selfassembly, in which ordered aggregates are formed in a spontaneous process. However, it is still a big challenge to develop simple and reliable synthetic methods for hierarchically selfassembled architectures with designed chemical components and controlled morphologies, which strongly affect the properties of nanomaterials. Iron oxides have been extensively studied in diverse fields including catalysis, environment protection, sensors, magnetic storage media, and clinical diagnosis and treatment. Various iron oxide structures, such as nanocrystals, particles, cubes, spindles, rods, wires, tubes, and flakes, have been successfully fabricated by a variety of methods. However, the self-assembly of these low-dimensional building blocks into complex 3D ordered nanostructures is still considerably more difficult. In order to further understand the mechanism of self-organization and expand the applications of iron oxide nanomaterials, self-assembled iron oxide 3D nanostructures need to be explored in more detail. Herein, we report the synthesis of novel 3D flowerlike iron oxide nanostructures by an ethylene glycol (EG)-mediated self-assembly process. Such a method has been adopted previously for the preparation of V2O5 hollow microspheres, [7]
1,508 citations
TL;DR: Gold nanoparticles supported on TiO2 or Fe2O3 catalyzed the chemoselective hydrogenation of functionalized nitroarenes with H2 under mild reaction conditions that avoided the accumulation of hydroxylamines and their potential exothermic decomposition.
Abstract: The selective reduction of a nitro group when other reducible functions are present is a difficult process that often requires stoichiometric amounts of reducing agents or, if H2 is used, the addition of soluble metals. Gold nanoparticles supported on TiO2 or Fe2O3 catalyzed the chemoselective hydrogenation of functionalized nitroarenes with H2 under mild reaction conditions that avoided the accumulation of hydroxylamines and their potential exothermic decomposition. These chemoselective hydrogenation gold catalysts also provide a previously unknown route for the synthesis of the industrially relevant cyclohexanone oxime from 1-nitro-1-cyclohexene.
1,331 citations
TL;DR: X-ray absorption spectroscopy revealed that cobalt was metallic, even for small particle sizes, after the in situ reduction treatment, which is a prerequisite for catalytic operation and is difficult to achieve using traditional oxidic supports.
Abstract: The influence of cobalt particle size in the range of 2.6-27 nm on the performance in Fischer-Tropsch synthesis has been investigated for the first time using well-defined catalysts based on an inert carbon nanofibers support material. X-ray absorption spectroscopy revealed that cobalt was metallic, even for small particle sizes, after the in situ reduction treatment, which is a prerequisite for catalytic operation and is difficult to achieve using traditional oxidic supports. The turnover frequency (TOF) for CO hydrogenation was independent of cobalt particle size for catalysts with sizes larger than 6 nm (1 bar) or 8 nm (35 bar), while both the selectivity and the activity changed for catalysts with smaller particles. At 35 bar, the TOF decreased from 23 x 10(-3) to 1.4 x 10(-3) s(-1), while the C5+ selectivity decreased from 85 to 51 wt % when the cobalt particle size was reduced from 16 to 2.6 nm. This demonstrates that the minimal required cobalt particle size for Fischer-Tropsch catalysis is larger (6-8 nm) than can be explained by classical structure sensitivity. Other explanations raised in the literature, such as formation of CoO or Co carbide species on small particles during catalytic testing, were not substantiated by experimental evidence from X-ray absorption spectroscopy. Interestingly, we found with EXAFS a decrease of the cobalt coordination number under reaction conditions, which points to reconstruction of the cobalt particles. It is argued that the cobalt particle size effects can be attributed to nonclassical structure sensitivity in combination with CO-induced surface reconstruction. The profound influences of particle size may be important for the design of new Fischer-Tropsch catalysts.
TL;DR: An overview of the mechanism of this remarkable reaction is presented as a means to explain the myriad of experimental results, particularly the various methods of catalyst generation, solvent and substrate effects, and choice of base or ligand as discussed by the authors.
TL;DR: Water has emerged as a versatile solvent for organic chemistry in recent years and gives completely new reactivity, including pericyclic reactions, reactions of carbanion equivalent, and reactions of carbocation equivalent.
Abstract: Water has emerged as a versatile solvent for organic chemistry in recent years. Water as a solvent is not only inexpensive and environmentally benign, but also gives completely new reactivity. The types of organic reactions in water are broad including pericyclic reactions, reactions of carbanion equivalent, reactions of carbocation equivalent, reactions of radicals and carbenes, transition-metal catalysis, oxidations-reductions, which we discuss in this tutorial review. Aqueous organic reactions have broad applications such as synthesis of biological compounds from carbohydrates and chemical modification of biomolecules.
TL;DR: In this tutorial review the most significant advances recently achieved in the stereoselective reduction of unsaturated organic compounds catalyzed by homogeneous transition metal complexes are critically reviewed.
Abstract: Hydrogen transfer reduction processes are attracting increasing interest from synthetic chemists in view of their operational simplicity and high selectivity. In this tutorial review the most significant advances recently achieved in the stereoselective reduction of unsaturated organic compounds catalyzed by homogeneous transition metal complexes are critically reviewed. A sharp growth of the synthetic applications of this technique in the synthesis of fine chemicals is predictable as the use of transition metal catalyzed reactions will become more familiar to synthetic chemists.
Book•
[...]
TL;DR: In this article, it was shown that supported gold catalysts can affect the oxidation of carbon monoxide at or below ambient temperature, with high activity at sites at the gold support interface, with the support making a vital contribution.
Abstract: Despite occasional references in the older literature to the ability of gold to catalyze certain reactions, the metal has until recently had the reputation of being one of the least catalytically useful. The recent discovery that some supported gold catalysts can affect the oxidation of carbon monoxide at or below ambient temperature has, however, focused attention on the metal's ability in this respect. For oxidation of carbon monoxide at low temperature, catalysts comprising small (<5 nm) gold particles supported preferably on an oxide of the first transition series (e.g., TiO2, α-Fe2O3) are needed. Deposition–precipitation and coprecipitation are better methods than impregnation for this purpose and provide the desired intimacy of contact between metal and support. High activity may well originate at sites at the gold–support interface, with the support making a vital contribution. Stable activity can result by optimizing aging in solution during the preparation, and low calcination temperatures are ge...
TL;DR: This is a story of the exploration of the olefin-metathesis reaction, a reaction that has been the major emphasis of my independent research and contributed to oleFin metathesis becoming the indispensable synthetic tool that it is today.
Abstract: This is a story of our exploration of the olefin-metathesis reaction, a reaction that has been the major emphasis of my independent research. As with all stories of scientific discovery, there are three components: the discoveries, the resulting applications, and, perhaps the most important of all, the people involved. Starting from observations made from seemingly unrelated work, our investigations into the fundamental chemistry of this transformation have been an exciting journey, with major advances often resulting from complete surprises, mistakes, and simple intuition. Ultimately, these efforts have contributed to olefin metathesis becoming the indispensable synthetic tool that it is today.
TL;DR: This work overviews the recent developments in this area by exploring the various techniques in which nanotubes can be functionalized with metals and other nanoparticles and explore the diverse applications of the resulting materials.
Abstract: A review. C nanotubes are one of the most intensively explored nanostructured materials. In particular, C nanotubes are unique and ideal templates onto which to immobilize nanoparticles allowing the construction of designed nanoarchitectures that are extremely attractive as supports for heterogeneous catalysts, for use in fuel cells, and in related technologies that exploit the inherent smallness and hollow characteristics of the nanoparticles. Here we overview the recent developments in this area by exploring the various techniques in which nanotubes can be functionalized with metals and other nanoparticles and explore the diverse applications of the resulting materials. [on SciFinder(R)]
TL;DR: A new microporous metal-organic framework compound featuring chiral (salen)Mn struts is highly effective as an asymmetric catalyst for olefin epoxidation, yielding enantiomeric excesses that rival those of the free molecular analogue.
TL;DR: In this article, a convenient process for the regioselective synthesis of 1,5-disubstituted 1,2,3-triazoles and 1,4,5-trisubstitized 1, 2,3, 4,5, 5 triazoles from organic azides and alkynes employs catalytic ruthenium.
Abstract: A convenient process for the regioselective synthesis of 1 ,5-disubstituted 1 ,2,3-triazoles and 1 ,4,5-trisubstituted 1 ,2,3-triazoles from organic azides and alkynes employs catalytic ruthenium.
TL;DR: The most active catalysts were formed when Fe was added to the support before the pyrolysis; however, samples in which Ni or no metal was added still showed increased activity for oxygen reduction compared with untreated carbon as mentioned in this paper.
TL;DR: In this paper, a comprehensive account of the currently available methods of the above transformation that afford high enantioselectivities and synthetically useful yields is given. But this review is limited to all-carbon quaternary stereocenters, i.e. carbon atoms bearing four different carbon substituents.
Abstract: Catalytic enantioselective construction of all-carbon quaternary stereocenters, i.e. carbon atoms bearing four different carbon substituents, poses a particular challenge in organic synthesis. This review gives a comprehensive account on the currently available methods of the above transformation that afford high enantioselectivities and synthetically useful yields.
TL;DR: Experimental and computational evidence indicates that the pivalate anion is a key component in the palladium-pivalic acid cocatalyst system, that it lowers the energy of C-H bond cleavage and acts as a catalytic proton shuttle from benzene to the stoichiometric carbonate base.
Abstract: A palladium−pivalic acid cocatalyst system has been developed that exhibits unprecedented reactivity in direct arylation This reactivity is illustrated with the first examples of high yielding direct metalation−arylation reactions of a completely unactivated arene, benzene Experimental and computational evidence indicates that the pivalate anion is a key component in the palladation/C−H bond breaking event, that it lowers the energy of C−H bond cleavage and acts as a catalytic proton shuttle from benzene to the stoichiometric carbonate base Eight examples of substituted aryl bromides are included which undergo direct arylation with benzene in 55−85% yield
TL;DR: A rate equation for the degradation based on Langmuir-Hinshelwood (L-H) model has been proposed and results show that the adsorption constant and rate constant in L-H model are dependent to the light intensity, and increase with increasing the lightintensity.
TL;DR: A number of chiral acid catalysts have been developed recently as discussed by the authors, with a focus being placed on thiourea, TADDOL, and phosphoric acids, which are rapidly growing areas in organocatalysis.
Abstract: Hydrogen bond catalysis and Bronsted acid catalysis are rapidly growing areas in organocatalysis. A number of chiral acid catalysts has been developed recently. Recent progress in the chiral Bronsted acid catalysis has been reviewed with a focus being placed on thiourea, TADDOL, and phosphoric acids. 1 Introduction 2 Hydrogen Bond Catalysis 2.1 Monofunctional Thiourea Catalysts 2.2 Bifunctional Thiourea Catalysts 2.3 TADDOL Derivatives 2.4 BINOL Derivatives 3 Bronsted Acid Catalysis 3.1 Ammonium Salts 3.2 Phosphoric Acids 4 Conclusion
TL;DR: In this paper, the concept of initiators for continuous activator regeneration (ICAR) in atom transfer radical polymerization (ATRP) is introduced, whereby a constant source of organic free radicals works to regenerate the CuI activator, which is otherwise consumed in termination reactions when used at very low concentrations.
Abstract: The concept of initiators for continuous activator regeneration (ICAR) in atom transfer radical polymerization (ATRP) is introduced, whereby a constant source of organic free radicals works to regenerate the CuI activator, which is otherwise consumed in termination reactions when used at very low concentrations. With this technique, controlled synthesis of polystyrene and poly(methyl methacrylate) (Mw/Mn < 1.2) can be implemented with catalyst concentrations between 10 and 50 ppm, where its removal or recycling would be unwarranted for many applications. Additionally, various organic reducing agents (derivatives of hydrazine and phenol) are used to continuously regenerate the CuI activator in activators regenerated by electron transfer (ARGET) ATRP. Controlled polymer synthesis of acrylates (Mw/Mn < 1.2) is realized with catalyst concentrations as low as 50 ppm. The rational selection of suitable Cu complexing ligands {tris[2-(dimethylamino)ethyl]amine (Me6TREN) and tris[(2-pyridyl)methyl]amine (TPMA)} is discussed in regards to specific side reactions in each technique (i.e., complex dissociation, acid evolution, and reducing agent complexation). Additionally, mechanistic studies and kinetic modeling are used to optimize each system. The performance of the selected catalysts/reducing agents in homo and block (co)polymerizations is evaluated.
TL;DR: The utilization of complex 4 led to the development of a reliable, easily employed Suzuki-Miyama protocol and Employing various reaction conditions allowed a large array of hindered biaryl and drug-like heteroaromatic compounds to be synthesized without difficulty.
Abstract: The synthesis of NHC-PdCl(2)-3-chloropyridine (NHC=N-heterocyclic carbene) complexes from readily available starting materials in air is described. The 2,6-diisopropylphenyl derivative was found to be highly catalytically active in alkyl-alkyl Suzuki and Negishi cross-coupling reactions. The synthesis, ease-of-use, and activity of this complex are substantial improvements over in situ catalyst generation and all current Pd-NHC complexes. The utilization of complex 4 led to the development of a reliable, easily employed Suzuki-Miyama protocol. Employing various reaction conditions allowed a large array of hindered biaryl and drug-like heteroaromatic compounds to be synthesized without difficulty.
TL;DR: In this article, four catalytic challenges for nickel steam reforming catalysts are discussed from both a practical and a fundamental point of view: activity, sulphur poisoning, carbon formation and sintering.
TL;DR: Improvements in Catalytic Systems and Superior Reactivity of N2 as the Nucleofuge 4637 and Related Matsuda−Heck Reactions 4637.
Abstract: 2.1.4. Effect of Bases and Other Additives 4628 2.1.5. Improved Catalytic Systems 4629 2.1.6. Applications in Synthesis 4630 2.1.7. Mechanistic Studies 4632 2.1.8. Related Matsuda−Heck Reactions 4633 2.2. Suzuki−Miyaura Reaction 4634 2.2.1. Early Studies 4634 2.2.2. Modification of the Boronic Counterpart 4635 2.2.3. Improved Catalytic Systems 4637 2.2.4. Superior Reactivity of N2 as the Nucleofuge 4637