scispace - formally typeset
Journal ArticleDOI

Combustion properties of biomass

Reads0
Chats0
TLDR
In this paper, a review of the properties of biomass relevant to combustion is briefly reviewed and the compositions of biomass among fuel types are variable, especially with respect to inorganic constituents important to the critical problems of fouling and slagging.
About
This article is published in Fuel Processing Technology.The article was published on 1998-03-01. It has received 1764 citations till now. The article focuses on the topics: Combustion & Heat of combustion.

read more

Citations
More filters
Journal ArticleDOI

A review of catalytic microwave pyrolysis of lignocellulosic biomass for value-added fuel and chemicals.

TL;DR: Microwave technology by itself cannot efficiently produce high quality bio-oil products, catalysts are used to improve the reaction conditions and selectivity for valued products during MAP, and future prospects and scientific development of MAP are considered.
Journal ArticleDOI

Characterization of biochar from switchgrass carbonization.

TL;DR: In this article, the authors investigated the characteristics of switchgrass biochar produced via carbonization and explored its potential use as a solid fuel in existing power plants that were built to accommodate coal and peat.
Journal ArticleDOI

Synthetic fuels from biomass using concentrated solar energy – A review

TL;DR: In this article, the area of land required for growing biomass can be reduced using the application of thermal solar to one half of that needed for a standard gasification system, and if hydrogen is generated by solar means, the figure becomes one third.
ReportDOI

Hot Gas Conditioning: Recent Progress with Larger-Scale Biomass Gasification Systems; Update and Summary of Recent Progress

TL;DR: An update of efforts related to large-scale biomass gasification systems and summarizes recent progress can be found in this article, where the authors also provide an overview of the major research and development issues.
Journal ArticleDOI

Relationship between fuel quality and gaseous and particulate matter emissions in a domestic pellet-fired boiler

TL;DR: In this article, the relationship between the fuel quality and the gaseous and particulate matter (PM) emissions in a domestic boiler fired with five different types of pellets, namely, two commercial pellet from pine residues, commercial pellets from cork residues, and in-house made pellets from olive wood and olive pruning residues.
References
More filters
Journal ArticleDOI

Mechanism and modeling of nitrogen chemistry in combustion

TL;DR: In this article, the mechanisms and rate parameters for the gas-phase reactions of nitrogen compounds that are applicable to combustion-generated air pollution are discussed and illustrated by comparison of results from detailed kinetics calculations with experimental data.
Book

Atmospheric Chemistry and Physics of Air Pollution

TL;DR: The Gaussian Plume Equation and Air Quality Models Atmospheric Removal Processes and Residence Times Air Pollution Statistics Acid Rain Index (AIRI) as mentioned in this paper, which measures the amount of acid rain in the air.
Journal ArticleDOI

The behavior of inorganic material in biomass-fired power boilers: Field and laboratory experiences

TL;DR: Alkali Deposits Investigation (ADI) as mentioned in this paper was a collaborative effort to understand the causes of unmanageable ash deposits in biomass-fired electric power boilers.
Journal ArticleDOI

Wood ash composition as a function of furnace temperature

TL;DR: In this paper, the elemental and molecular composition of mineral matter in five wood types and two barks was investigated as a function of temperature using thermal gravimetric analysis, differential thermal analysis, inductively coupled plasma emission spectroscopy, and X-ray diffraction.
Journal ArticleDOI

Ash deposition during biomass and coal combustion: A mechanistic approach

TL;DR: In this article, a mechanistic approach to describing the fate of inorganic material in solid fuels with a particular focus on the mechanisms of ash deposition is presented. But this approach has the potential of embracing a large range of fuel variations, combustor types, and operating conditions without the need of developing extensive databases or testing procedures for each new situation.