Journal ArticleDOI
Polymer microfluidic devices
Holger Becker,Laurie E. Locascio +1 more
Reads0
Chats0
TLDR
This article presents a review of polymer-based microfluidic systems including their material properties, fabrication methods, device applications, and finally an analysis of the market that drives their development.About:
This article is published in Talanta.The article was published on 2002-02-11. It has received 1150 citations till now.read more
Citations
More filters
Dissertation
Design of a fast cycle time hot micro-embossing machine
TL;DR: Thesis (S.M.) as mentioned in this paper, Massachusetts Institute of Technology, Dept. of Mechanical Engineering, June 2005, Section 5.1, Section 7.1.2, Section 6.
Reconfigurable Micro-mould for the Manufacture of Truly 3D Polymer Microfluidic Devices
TL;DR: In this paper, the concept, the design and the manufacturing steps for the fabrication of a precision mold for micro-injection molding of truly three dimensional microfluidic devices are discussed.
Journal ArticleDOI
Laser-based fabrication of polymer micropump
Joohan Kim,Xianfan Xu +1 more
TL;DR: In this paper, the fluid flow inside the diffuser polymer micropump is also calculated using computational fluid dynamics methods and the simulated results are compared with the experimental data, and it is demonstrated that polymer-based micropumps can be conveniently fabricated using the laser machining technique.
Journal ArticleDOI
Fluorescence affinity sensing by using a self-contained fluid manoeuvring microfluidic chip.
TL;DR: The microfluidic chip described in this work could be applied to various biological and chemical analyses using integrated washing steps or fluid replacement steps with minimum sample handling.
Journal ArticleDOI
Patterning of platinum microelectrodes in polymeric microfluidic chips
TL;DR: In this article, a novel fabrication scheme was described for forming integrated microelectrodes in a poly-di-methyl-siloxane (PDMS) microchip. But no techniques have been reported so far for depositing platinum electrodes in soft polymeric microchannels.
References
More filters
Book
CRC Handbook of Chemistry and Physics
TL;DR: CRC handbook of chemistry and physics, CRC Handbook of Chemistry and Physics, CRC handbook as discussed by the authors, CRC Handbook for Chemistry and Physiology, CRC Handbook for Physics,
Journal ArticleDOI
Rapid prototyping of microfluidic systems in poly(dimethylsiloxane)
TL;DR: A procedure that makes it possible to design and fabricate microfluidic systems in an elastomeric material poly(dimethylsiloxane) (PDMS) in less than 24 h by fabricating a miniaturized capillary electrophoresis system is described.
Journal ArticleDOI
Fabrication of microfluidic systems in poly(dimethylsiloxane)
J.C. McDonald,David C. Duffy,Janelle R. Anderson,Daniel T. Chiu,Hongkai Wu,Olivier Schueller,George M. Whitesides +6 more
TL;DR: Fabrication of microfluidic devices in poly(dimethylsiloxane) (PDMS) by soft lithography provides faster, less expensive routes to devices that handle aqueous solutions.
Journal ArticleDOI
A Sequencing Method Based on Real-Time Pyrophosphate
Journal ArticleDOI
Micromachining a Miniaturized Capillary Electrophoresis-Based Chemical Analysis System on a Chip
TL;DR: In this article, the authors demonstrated a miniaturized system for sample handling and separation using electrophoresis-based separations of amino acids with up to 75,000 theoretical plates in about 15 seconds.