Journal ArticleDOI
Polymer microfluidic devices
Holger Becker,Laurie E. Locascio +1 more
Reads0
Chats0
TLDR
This article presents a review of polymer-based microfluidic systems including their material properties, fabrication methods, device applications, and finally an analysis of the market that drives their development.About:
This article is published in Talanta.The article was published on 2002-02-11. It has received 1150 citations till now.read more
Citations
More filters
Journal ArticleDOI
Characterization of liquid flows in microfluidic systems
TL;DR: In this article, the authors present major findings in the literature on fundamentals of flow physics in microchannels and provide an extensive overview on the available knowledge base as well as the areas that require intensive investigation.
Journal ArticleDOI
A State-of-the-Art Review of Mixing in Microfluidic Mixers
TL;DR: In this paper, an overview of the flow phenomena and mixing characteristics in active and passive micromixers is presented, including the types of physical phenomena and their utilization in microfluidic mixers.
Journal ArticleDOI
A novel fabrication method of flexible and monolithic 3D microfluidic structures using lamination of SU-8 films
I. Patrick Abgrall,Christine Lattes,Véronique Conédéra,Xavier Dollat,Stéphane Colin,Anne Marie Gué +5 more
TL;DR: In this article, the fabrication of three-dimensional (3D) microfluidic networks entirely made of SU-8 with integrated electrodes is reported. But unlike other reported methods, transferred layers are patterned following the bonding step allowing a more accurate and simple alignment between levels than techniques using already patterned layers.
Journal ArticleDOI
Microfluidics Based Point-of-Care Diagnostics
Chandra Mouli Pandey,Shine Augustine,Saurabh Kumar,Suveen Kumar,Sharda Nara,Saurabh Srivastava,Bansi D. Malhotra +6 more
TL;DR: The overview of the different materials (glass, silicon, polymer, paper, and techniques for the fabrication of MF based POC devices along with their wide range of biosensor applications is presented.
References
More filters
Book
CRC Handbook of Chemistry and Physics
TL;DR: CRC handbook of chemistry and physics, CRC Handbook of Chemistry and Physics, CRC handbook as discussed by the authors, CRC Handbook for Chemistry and Physiology, CRC Handbook for Physics,
Journal ArticleDOI
Rapid prototyping of microfluidic systems in poly(dimethylsiloxane)
TL;DR: A procedure that makes it possible to design and fabricate microfluidic systems in an elastomeric material poly(dimethylsiloxane) (PDMS) in less than 24 h by fabricating a miniaturized capillary electrophoresis system is described.
Journal ArticleDOI
Fabrication of microfluidic systems in poly(dimethylsiloxane)
J.C. McDonald,David C. Duffy,Janelle R. Anderson,Daniel T. Chiu,Hongkai Wu,Olivier Schueller,George M. Whitesides +6 more
TL;DR: Fabrication of microfluidic devices in poly(dimethylsiloxane) (PDMS) by soft lithography provides faster, less expensive routes to devices that handle aqueous solutions.
Journal ArticleDOI
A Sequencing Method Based on Real-Time Pyrophosphate
Journal ArticleDOI
Micromachining a Miniaturized Capillary Electrophoresis-Based Chemical Analysis System on a Chip
TL;DR: In this article, the authors demonstrated a miniaturized system for sample handling and separation using electrophoresis-based separations of amino acids with up to 75,000 theoretical plates in about 15 seconds.