Showing papers on "Petroleum reservoir published in 2020"

A Review on Wettability Alteration in Carbonate Rocks: Wettability Modifiers

Abstract: More than half of the global oil reserves are in carbonate reservoirs. Carbonate rocks, however, in most cases tend to be mixed-wet or oil-wet. Wettability alteration of carbonate reservoir rock ha...

Toward Reservoir-on-a-Chip: Rapid Performance Evaluation of Enhanced Oil Recovery Surfactants for Carbonate Reservoirs Using a Calcite-Coated Micromodel.

Abstract: Enhanced oil recovery (EOR) plays a significant role in improving oil production. Tertiary EOR, including surfactant flooding, can potentially mobilize residual oil after water flooding. Prior to the field deployment, the surfactant performance must be evaluated using site-specific crude oil at reservoir conditions. Core flood experiments are common practice to evaluate surfactants for oil displacement efficiency using core samples. Core flood experiments, however, are expensive and time-consuming and do not allow for pore scale observations of fluid-fluid interactions. This work introduces the framework to evaluate the performance of EOR surfactants via a Reservoir-on-a-Chip approach, which uses microfluidic devices to mimic the oil reservoir. A unique feature of this study is the use of chemically modified micromodels such that the pore surfaces are representative of carbonate reservoir rock. To represent calcium carbonate reservoir pores, the inner channels of glass microfluidic devices were coated with thin layers of calcium carbonate nanocrystals and the surface was modified to exhibit oil-wet conditions through a crude oil aging process. During surfactant screening, oil and water phases were imaged by fluorescence microscopy to reveal the micro to macro scale mechanisms controlling surfactant-assisted oil recovery. The role of the interfacial tension (IFT) and wettability in the microfluidic device was simulated using a phase-field model and compared to laboratory results. We demonstrated the effect of low IFT at the oil-water interface and wettability alteration on surfactant-enhanced oil displacement efficiency; thus providing a time-efficient and low-cost strategy for quantitative and qualitative assessment. In addition, this framework is an effective method for pre-screening EOR surfactants for use in carbonate reservoirs prior to further core and field scale testing.

Review of Shale Gas Sorption and Its Models

Abstract: Shale is a self-sourced reservoir rock that contains tremendous natural gas resources. Shale incorporates unique gas storage mechanisms, and both free gas and adsorbed gas contribute significantly ...

Pore-scale mechanisms of CO2 storage in oilfields.

Abstract: Rapid implementation of global scale carbon capture and storage is required to limit temperature rises to 1.5 °C this century. Depleted oilfields provide an immediate option for storage, since injection infrastructure is in place and there is an economic benefit from enhanced oil recovery. To design secure storage, we need to understand how the fluids are configured in the microscopic pore spaces of the reservoir rock. We use high-resolution X-ray imaging to study the flow of oil, water and CO2 in an oil-wet rock at subsurface conditions of high temperature and pressure. We show that contrary to conventional understanding, CO2 does not reside in the largest pores, which would facilitate its escape, but instead occupies smaller pores or is present in layers in the corners of the pore space. The CO2 flow is restricted by a factor of ten, compared to if it occupied the larger pores. This shows that CO2 injection in oilfields provides secure storage with limited recycling of gas; the injection of large amounts of water to capillary trap the CO2 is unnecessary.

Dynamics of water injection in an oil-wet reservoir rock at subsurface conditions: Invasion patterns and pore-filling events

Abstract: We use fast synchrotron x-ray microtomography to investigate the pore-scale dynamics of water injection in an oil-wet carbonate reservoir rock at subsurface conditions. We measure, in situ, the geometric contact angles to confirm the oil-wet nature of the rock and define the displacement contact angles using an energy-balance-based approach. We observe that the displacement of oil by water is a drainagelike process, where water advances as a connected front displacing oil in the center of the pores, confining the oil to wetting layers. The displacement is an invasion percolation process, where throats, the restrictions between pores, fill in order of size, with the largest available throats filled first. In our heterogeneous carbonate rock, the displacement is predominantly size controlled; wettability has a smaller effect, due to the wide range of pore and throat sizes, as well as largely oil-wet surfaces. Wettability only has an impact early in the displacement, where the less oil-wet pores fill by water first. We observe drainage associated pore-filling dynamics including Haines jumps and snap-off events. Haines jumps occur on single- and/or multiple-pore levels accompanied by the rearrangement of water in the pore space to allow the rapid filling. Snap-off events are observed both locally and distally and the capillary pressure of the trapped water ganglia is shown to reach a new capillary equilibrium state. We measure the curvature of the oil-water interface. We find that the total curvature, the sum of the curvatures in orthogonal directions, is negative, giving a negative capillary pressure, consistent with oil-wet conditions, where displacement occurs as the water pressure exceeds that of the oil. However, the product of the principal curvatures, the Gaussian curvature, is generally negative, meaning that water bulges into oil in one direction, while oil bulges into water in the other. A negative Gaussian curvature provides a topological quantification of the good connectivity of the phases throughout the displacement.

Small-scale diagenetic facies heterogeneity controls porosity and permeability pattern in reservoir sandstones

Abstract: The fluvial-aeolian Upper Rotliegend sandstones from the Bebertal outcrop (Flechtingen High, Germany) are the famous reservoir analog for the deeply buried Upper Rotliegend gas reservoirs of the Southern Permian Basin. While most diagenetic and reservoir quality investigations are conducted on a meter scale, there is an emerging consensus that significant reservoir heterogeneity is inherited from diagenetic complexity at smaller scales. In this study, we utilize information about diagenetic products and processes at the pore- and plug-scale and analyze their impact on the heterogeneity of porosity, permeability, and cement patterns. Eodiagenetic poikilitic calcite cements, illite/iron oxide grain coatings, and the amount of infiltrated clay are responsible for mm- to cm-scale reservoir heterogeneities in the Parchim formation of the Upper Rotliegend sandstones. Using the Petrel E&P software platform, spatial fluctuations and spatial variations of permeability, porosity, and calcite cements are modeled and compared, offering opportunities for predicting small-scale reservoir rock properties based on diagenetic constraints.

Coupling Between Poromechanical Behavior and Fluid Flow in Tight Rock

Abstract: Proper characterization of the mechanical and flow properties of participating rock formations is crucial for subsurface geo-energy projects, including hydrocarbon extraction, geologic carbon storage, and enhanced geothermal systems. Application of mechanical and hydraulic pressures changes the porosity of rock and modifies flow paths. For low-permeable or “tight” rock that mainly contains nanoscale pores and serves as the confining layer for underground storage operations, a significant change in permeability may occur due to a small change in porosity. The pore volume changes in nanoporous geomaterials are extremely difficult to measure directly, but can be assessed from the knowledge of the hydro-mechanical response. Experimental methods to measure the stress-dependent permeability and poroelastic parameters of fluid-saturated tight rock are introduced. Eau Claire shale, Opalinus clay (claystone), and Charcoal granite are selected as representative materials for tight rock and their pore structure and material properties are carefully investigated. The porosity–permeability relationship for tight rock is established by adopting a power-law dependence with the exponent value in the range of 15–17, thus being significantly larger than that for a porous reservoir rock. Consequently, even small perturbations of porosity can cause orders of magnitude changes in permeability possessing a risk on the sealing capacity of the tight formations.

Numerical Modeling of Coupled Fluid Flow and Geomechanical Stresses in a Petroleum Reservoir

Abstract: A fully coupled hydro and geomechanical model has been used to predict the transient pressure disturbance, reservoir deformation, and effective stress distribution in both homogeneous and heterogeneous reservoirs. The heterogeneous reservoir is conceptualized by explicitly considering the spatial distributions of porosity and permeability as against assuming it as constant values. The finite element method was used in the coupled model in conjunction with the poroelasticity. Transient pressure disturbance is significantly influenced by the overburden during the production in both homogeneous and heterogeneous reservoirs for all the perforation schemes. Perforation scheme 2 provides the optimum reservoir performance when compared with other three schemes in terms of transient pressure distribution and reservoir subsidence. It also has the ability to overcome both the water and gas coning problems when the reservoir fluid flow is driven by both gas cap and water drive mechanisms. A Biot–Willis coefficient is found to significantly influence both the pressure and stress distribution right from the wellbore to the reservoir boundary. Maximum effective stresses have been generated in the vicinity of the wellbore in the reservoir at a high Biot–Willis coefficient of 0.9. Thus, the present work clearly projects that a Biot–Willis coefficient of 0 cannot be treated to be a homogeneous reservoir by default, while the coupled effect of hydro and geomechanical stresses plays a very critical role. Therefore, the implementation of the coupled hydro and geomechanical numerical models can improve the prediction of transient reservoir behavior efficiently for the simple and complex geological systems effectively.