Showing papers in "arXiv: Materials Science in 2009"
TL;DR: Quantum ESPRESSO as discussed by the authors is an integrated suite of computer codes for electronic-structure calculations and materials modeling, based on density functional theory, plane waves, and pseudopotentials (norm-conserving, ultrasoft, and projector-augmented wave).
Abstract: Quantum ESPRESSO is an integrated suite of computer codes for electronic-structure calculations and materials modeling, based on density-functional theory, plane waves, and pseudopotentials (norm-conserving, ultrasoft, and projector-augmented wave). Quantum ESPRESSO stands for "opEn Source Package for Research in Electronic Structure, Simulation, and Optimization". It is freely available to researchers around the world under the terms of the GNU General Public License. Quantum ESPRESSO builds upon newly-restructured electronic-structure codes that have been developed and tested by some of the original authors of novel electronic-structure algorithms and applied in the last twenty years by some of the leading materials modeling groups worldwide. Innovation and efficiency are still its main focus, with special attention paid to massively-parallel architectures, and a great effort being devoted to user friendliness. Quantum ESPRESSO is evolving towards a distribution of independent and inter-operable codes in the spirit of an open-source project, where researchers active in the field of electronic-structure calculations are encouraged to participate in the project by contributing their own codes or by implementing their own ideas into existing codes.
13,052 citations
Posted Content•
TL;DR: In this paper, an efficient and reliable methodology for crystal structure prediction, merging ab initio total energy calculations and a specifically devised evolutionary algorithm, was developed, which allows one to predict the most stable crystal structure and a number of low-energy metastable structures for a given compound at any P-T conditions without requiring any experimental input.
Abstract: We have developed an efficient and reliable methodology for crystal structure prediction, merging ab initio total-energy calculations and a specifically devised evolutionary algorithm. This method allows one to predict the most stable crystal structure and a number of low-energy metastable structures for a given compound at any P-T conditions without requiring any experimental input. Extremely high success rate has been observed in a few tens of tests done so far, including ionic, covalent, metallic, and molecular structures with up to 40 atoms in the unit cell. We have been able to resolve some important problems in high-pressure crystallography and report a number of new high-pressure crystal structures. Physical reasons for the success of this methodology are discussed.
1,584 citations
TL;DR: In this paper, the authors used a carbon isotope labeling technique to elucidate the growth kinetics and unambiguously demonstrate that graphene growth on Cu is by surface adsorption whereas on Ni is by segregation-precipitation.
Abstract: Large-area graphene is a new material with properties that make it desirable for advanced scaled electronic devices1. Recently, chemical vapor deposition (CVD) of graphene and few-layer graphene using hydrocarbons on metal substrates such as Ni and Cu has shown to be a promising technique2-5. It has been proposed in recent publications that graphene growth on Ni occurs by C segregation2 or precipitation3, while that on Cu is by surface adsorption5. In this letter, we used a carbon isotope labeling technique to elucidate the growth kinetics and unambiguously demonstrate that graphene growth on Cu is by surface adsorption whereas on Ni is by segregation-precipitation. An understanding of the evolution of graphene growth and thus growth mechanism(s) is desired to obtain uniform graphene films. The results presented in this letter clearly demonstrate that surface adsorption is preferred over precipitation to grow graphene because it is a self-limiting process and thus manufacturable.
1,108 citations
TL;DR: In this article, the authors highlight the physical concepts of multiferroicity and the current challenges to integrate the magnetism and ferroelectricity into a single-phase system, and summarize various strategies used to combine the two types of orders.
Abstract: Multiferroics, defined for those multifunctional materials in which two or more kinds of fundamental ferroicities coexist, have become one of the hottest topics of condensed matter physics and materials science in recent years. The coexistence of several order parameters in multiferroics brings out novel physical phenomena and offers possibilities for new device functions. The revival of research activities on multiferroics is evidenced by some novel discoveries and concepts, both experimentally and theoretically. In this review article, we outline some of the progressive milestones in this stimulating field, specially for those single phase multiferroics where magnetism and ferroelectricity coexist. Firstly, we will highlight the physical concepts of multiferroicity and the current challenges to integrate the magnetism and ferroelectricity into a single-phase system. Subsequently, we will summarize various strategies used to combine the two types of orders. Special attentions to three novel mechanisms for multiferroicity generation: (1) the ferroelectricity induced by the spin orders such as spiral and E-phase antiferromagnetic spin orders, which break the spatial inversion symmetry, (2) the ferroelectricity originating from the charge ordered states, and (3) the ferrotoroidic system, will be paid. Then, we will address the elementary excitations such as electromagnons, and application potentials of multiferroics. Finally, open questions and opportunities will be prospected.
1,088 citations
TL;DR: In this paper, the authors show that the room-temperature thermal conductivity changes from K~3000 W/mK to 1500 W /mK as the number of atomic plains in few-layer graphene increases from 2 to 4.
Abstract: Graphene, in addition to its unique electronic and optical properties, revealed unusually high thermal conductivity. The fact that thermal conductivity of large enough graphene sheets should be higher than that of basal planes of bulk graphite was predicted theoretically by Klemens. However, the exact mechanisms behind drastic alteration of material's intrinsic ability to conduct heat as its dimensionality changes from 2-D to 3-D remain elusive. Recent availability of high-quality few-layer graphene materials allowed us to study dimensional crossover experimentally. Here we show that the room-temperature thermal conductivity changes from K~3000 W/mK to 1500 W/mK as the number of atomic plains in few-layer graphene increases from 2 to 4. We explained the observed evolution from 2-D to bulk by the cross-plane coupling of the low-energy phonons and corresponding changes in the phonon Umklapp scattering. The obtained results shed light on heat conduction in low-dimensional materials and may open up few-layer graphene applications in thermal management of nanoelectronics.
876 citations
Posted Content•
TL;DR: In this article, the two-dimensional systems MoS2 and NbSe2 were analyzed and compared with the three-dimensional analogue of this compound, and it was shown that MoS$_2$ is a semiconductor with a gap which is rather close to that of the three dimensional analogue.
Abstract: We report on ab-initio calculations of the two-dimensional systems MoS2 and NbSe2, which recently were synthesized. We find that two-dimensional MoS$_2$ is a semiconductor with a gap which is rather close to that of the three dimensional analogue, and that NbSe$_2$ is a metal, which is similar to the three dimensional analogue of this compound.
We further computed the electronic structure of the two-dimensional hexagonal (graphene like) lattices of Si and Ge, and compare them with the electronic structure of graphene. It is found that the properties related to the Dirac cone do not appear in the case of two-dimensional hexagonal germanium, which is metallic, contrary to two-dimensional hexagonal silicon, which has an electronic structure very similar to the one of graphene, making them possibly equivalent.
827 citations
Posted Content•
TL;DR: In this article, the authors presented a 180 solvothermal reduction method for GS and GO, which is more effective than the earlier reduction methods in lowering the oxygen and defect levels in GS, increasing the graphene domains, and bringing the conductivity of GS close to pristine graphene.
Abstract: Graphene has attracted much attention due to its interesting properties and potential applications. Chemical exfoliation methods have been developed to make graphene recently, aimed at large-scale assembly and applications such as composites and Li ion batteries. Although efficient, the chemical exfoliation methods involve oxidation of graphene and introduce defects in the as-made sheets. Hydrazine reduction at 100 has shown to partially restore the structure and conductance of graphite oxide. However, the reduced GO still shows strong defect peaks in Raman spectra with higher resistivity than pristine graphene by 2 to 3 orders of magnitude. It is important to produce much less defective graphene sheets than GO, and develop more effective graphene reduction. Recently, we reported a mild exfoliation-reintercalation-expansion method to form high-quality GS with higher conductivity and lower oxidation degree than GO.5 Here, we present a 180 solvothermal reduction method for our GS and GO. The solvothermal reduction is more effective than the earlier reduction methods in lowering the oxygen and defect levels in GS, increasing the graphene domains, and bringing the conductivity of GS close to pristine graphene. The reduced GS possess the highest degree of pristinity among chemically derived graphene.
714 citations
TL;DR: The synthesis of several new poly(ethylene glycol) grafted branched polymers for functionalization of various nanomaterials including carbon nanotubes, gold nanoparticles (NPs), and gold nanorods (NRs), affording high aqueous solubility and stability for these materials.
Abstract: Nanomaterials have been actively pursued for biological and medical applications in recent years. Here, we report the synthesis of several new poly(ethylene glycol) grafted branched-polymers for functionalization of various nanomaterials including carbon nanotubes, gold nanoparticles (NP) and gold nanorods (NRs), affording high aqueous solubility and stability for these materials. We synthesize different surfactant polymers based upon poly-(g-glutamic acid) (gPGA) and poly(maleic anhydride-alt-1-octadecene) (PMHC18). We use the abundant free carboxylic acid groups of gPGA for attaching lipophilic species such as pyrene or phospholipid, which bind to nanomaterials via robust physisorption. Additionally, the remaining carboxylic acids on gPGA or the amine-reactive anhydrides of PMHC18 are then PEGylated, providing extended hydrophilic groups, affording polymeric amphiphiles. We show that single-walled carbon nanotubes (SWNTs), Au NPs and NRs functionalized by the polymers exhibit high stability in aqueous solutions at different pHs, at elevated temperatures and in serum. Morever, the polymer-coated SWNTs exhibit remarkably long blood circulation (t1/2 22.1 h) upon intravenous injection into mice, far exceeding the previous record of 5.4 h. The ultra-long blood circulation time suggests greatly delayed clearance of nanomaterials by the reticuloendothelial system (RES) of mice, a highly desired property for in vivo applications of nanomaterials, including imaging and drug delivery.
492 citations
TL;DR: In this article, the authors proposed a simple model for the lattice thermal conductivity of graphene in the framework of Klemens approximation, and the Gruneisen parameters were introduced separately for the longitudinal and transverse phonon branches through averaging over phonon modes obtained from the first-principles.
Abstract: The authors proposed a simple model for the lattice thermal conductivity of graphene in the framework of Klemens approximation. The Gruneisen parameters were introduced separately for the longitudinal and transverse phonon branches through averaging over phonon modes obtained from the first-principles. The calculations show that Umklapp-limited thermal conductivity of graphene grows with the increasing linear dimensions of graphene flakes and can exceed that of the basal planes of bulk graphite when the flake size is on the order of few micrometers. The obtained results are in agreement with experimental data and reflect the two-dimensional nature of phonon transport in graphene.
411 citations
TL;DR: In this paper, the authors demonstrate that the excess negative charge can be fully compensated by non-covalently functionalizing graphene with the strong electron acceptor tetrafluorotetracyanoquinodimethane (F4-TCNQ).
Abstract: Paul Scherrer Institut, CH-5232 Villigen-PSI, Switzerland(Dated: March 16, 2010)Epitaxial graphene on SiC(0001) suffers from strong intrinsic n-type doping. We demonstrate thatthe excess negative charge can be fully compensated by non-covalently functionalizing graphene withthe strong electron acceptor tetrafluorotetracyanoquinodimethane (F4-TCNQ). Charge neutralitycan be reached in monolayer graphene as shown in electron dispersion spectra from angular re-solved photoemission spectroscopy (ARPES). In bilayer graphene the band gap that originates fromthe SiC/graphene interface dipole increases with increasing F4-TCNQ deposition and, as a con-sequence of the molecular doping, the Fermi level is shifted into the band gap. The reduction ofthe charge carrier density upon molecular deposition is quantified using electronic Fermi surfacesand Raman spectroscopy. The structural and electronic characteristics of the graphene/F4-TCNQcharge transfer complex are investigated by X-ray photoelectron spectroscopy (XPS) and ultravioletphotoelectron spectroscopy (UPS). The doping effect on graphene is preserved in air and is temper-ature resistant up to 200
342 citations
Posted Content•
TL;DR: In this paper, the authors summarize the previously developed protocols for functionalization and bioconjugation of single wall carbon nanotubes (SWNTs) for various biomedical applications including biological imaging, sensing and drug delivery.
Abstract: Biomedical applications of carbon nanotubes have attracted much attention in recent years. Here, we summarize our previously developed protocols for functionalization and bioconjugation of single wall carbon nanotubes (SWNTs) for various biomedical applications including biological imaging, sensing and drug delivery. Sonication of SWNTs in solutions of phospholipid-polyethylene glycol (PL-PEG) is our most commonly used protocol of SWNT functionalization. Compared to other frequently used covalent strategies, our non-covalent functionalization protocol largely retains the intrinsic optical properties of SWNTs, which are useful in various biological imaging and sensing applications. Functionalized SWNTs are conjugated with targeting ligands for specific cell labeling in vitro or tumor targeting in vivo. Radio labels are introduced for tracking and imaging of SWNTs in real time in vivo. Moreover, SWNTs can be conjugated with small interfering RNA (siRNA) or loaded with chemotherapy drugs for drug delivery. These procedures take various times ranging from one to five days.
IBM1
TL;DR: An organic polymer buffer layer between graphene and conventional gate dielectrics in top-gated graphene transistors does not significantly degrade carrier mobility, allowing for high field-effect mobilities to be retained inTop-gate operation.
Abstract: We utilize an organic polymer buffer layer between graphene and conventional gate dielectrics in top-gated graphene transistors. Unlike other insulators, this dielectric stack does not significantly degrade carrier mobility, allowing for high field-effect mobilities to be retained in top-gate operation. This is demonstrated in both two-point and four-point analysis, and in the high-frequency operation of a graphene transistor. Temperature dependence of the carrier mobility suggests that phonons are the dominant scatterers in these devices.
IBM1
TL;DR: In this article, the temperature distribution in a biased single-layer graphene transistor using Raman scattering microscopy of the 2D-phonon band was measured, and it was shown that remote scattering by substrate polar surface phonons increases the energy transfer to the substrate and at the same time limits the high-bias electronic conduction of graphene.
Abstract: We measure the temperature distribution in a biased single-layer graphene transistor using Raman scattering microscopy of the 2D-phonon band. Peak operating temperatures of 1050 K are reached in the middle of the graphene sheet at 210 KW cm^(-2) of dissipated electric power. The metallic contacts act as heat sinks, but not in a dominant fashion. To explain the observed temperature profile and heating rate, we have to include heat-flow from the graphene to the gate oxide underneath, especially at elevated temperatures, where the graphene thermal conductivity is lowered due to umklapp scattering. Velocity saturation due to phonons with about 50 meV energy is inferred from the measured charge density via shifts in the Raman G-phonon band, suggesting that remote scattering (through field coupling) by substrate polar surface phonons increases the energy transfer to the substrate and at the same time limits the high-bias electronic conduction of graphene.
TL;DR: First principles calculations reveal that an oxidative cut of graphene is realized by forming epoxy and then carbonyl pairs, and the proposed epoxy pairs may be related to some long puzzling experimental observations on graphene oxide.
Abstract: Our first principles calculations reveal that oxidative cut of graphene is realized by forming epoxy and then carbonyl pairs. Direct forming carbonyl pair to tear graphene up from an edge position is not favorable in energy. This atomic picture is valuable for developing effective graphene manipulation means. The proposed epoxy pairs may be related to some long puzzling experimental observations on graphene oxide.
Posted Content•
TL;DR: In this article, the heat flux in graphene nano ribbons has been studied by using molecular dynamics simulations and it is found that the heat flow runs preferentially along the direction of decreasing width, which demonstrates significant thermal rectification effect in the asymmetric graphene ribbons.
Abstract: In this paper, heat flux in graphene nano ribbons has been studied by using molecular dynamics simulations. It is found that the heat flux runs preferentially along the direction of decreasing width, which demonstrates significant thermal rectification effect in the asymmetric graphene ribbons. The dependence of rectification ratio on the vertex angle and the length are also discussed. Compared to the carbon nanotube based one-dimensional thermal rectifier, graphene nano ribbons have much higher rectification ratio even in large scale. Our results demonstrate that asymmetric graphene ribbon might be a promising structure for practical thermal (phononics) device.
TL;DR: In this paper, the authors investigated the Raman spectra of single-layer and multi-layer graphene under ultraviolet laser excitation at the wavelength of 325 nm and found that while the G peak of graphene remains pronounced in UV Raman, the 2D band intensity undergoes severe quenching.
Abstract: We investigated Raman spectra of single-layer and multi-layer graphene under ultraviolet laser excitation at the wavelength of 325 nm. It was found that while the G peak of graphene remains pronounced in UV Raman spectra, the 2D band intensity undergoes severe quenching. The evolution of the ratio of the intensities of the G and 2D peaks, I(G)/I(2D), as the number of graphene layers n changes from n=1 to n=5, is different in UV Raman spectra from that in conventional visible Raman spectra excited at the 488 nm and 633 nm wavelengths. The 2D band under UV excitation shifts to larger wave numbers and is found near 2825 1/cm. The observed UV Raman features of graphene were explained by invoking the resonant scattering model. The obtained results contribute to the Raman nanometrology of graphene by providing an additional metric for determining the number of graphene layers and assessing its quality.
TL;DR: In this paper, a short overview of the calculation of thermal properties of materials from first principles, using the quasi-harmonic approximation (QHA) method, is given, along with some codes that implement it.
Abstract: This paper gives a short overview of the calculation of thermal properties of materials from first principles, using the Quasi-Harmonic Approximation (QHA) We first introduce some of the thermal properties of interest and describe how they can be calculated in the framework of the QHA; then we briefly recall Density-Functional Perturbation Theory as a tool for calculating phonons from first principles, and present some codes that implement it; finally we review recent applications of first-principle QHA
TL;DR: In this paper, an oxide thermal rectifier made of two cobalt oxides with different thermal conductivities was used to detect the thermal rectification, and the rectifying coefficient was found to be 1.43, which was in good agreement with the numerical calculation.
Abstract: We have experimentally demonstrated thermal rectification as bulk effect. According to a theoretical design of a thermal rectifier, we have prepared an oxide thermal rectifier made of two cobalt oxides with different thermal conductivities, and have made an experimental system to detect the thermal rectification. The rectifying coefficient of the device is found to be 1.43, which is in good agreement with the numerical calculation.
TL;DR: In this article, the authors present an experimental demonstration of strong coupling between a surface plasmon propagating on a planar silver substrate, and the lowest excited state of CdSe nanocrystals.
Abstract: We present an experimental demonstration of strong coupling between a surface plasmon propagating on a planar silver substrate, and the lowest excited state of CdSe nanocrystals. Variable-angle spectroscopic ellipsometry measurements demonstrated the formation of plasmon-exciton mixed states, characterized by a Rabi splitting of $\sim$ 82 meV at room temperature. Such a coherent interaction has the potential for the development of plasmonic non-linear devices, and furthermore, this system is akin to those studied in cavity quantum electrodynamics, thus offering the possibility to study the regime of strong light-matter coupling in semiconductor nanocrystals at easily accessible experimental conditions.
Posted Content•
TL;DR: In this article, a meso-scale analysis is performed to determine the fracture process zone of concrete subjected to uniaxial tension, which is then used to calibrate an integral-type nonlocal model.
Abstract: A meso-scale analysis is performed to determine the fracture process zone of concrete subjected to uniaxial tension. The meso-structure of concrete is idealised as stiff aggregates embedded in a soft matrix and separated by weak interfaces. The mechanical response of the matrix, the inclusions and the interface between the matrix and the inclusions is modelled by a discrete lattice approach. The inelastic response of the lattice elements is described by a damage approach, which corresponds to a continuous reduction of the stiffness of the springs. The fracture process in uniaxial tension is approximated by an analysis of a two-dimensional cell with periodic boundary conditions. The spatial distribution of dissipated energy density at the meso-scale of concrete is determined. The size and shape of the deterministic FPZ is obtained as the average of random meso-scale analyses. Additionally, periodicity of the discretisation is prescribed to avoid influences of the boundaries of the periodic cell on fracture patterns. The results of these analyses are then used to calibrate an integral-type nonlocal model.
TL;DR: The dry transfer of epitaxial graphene (EG) from the C-face of 4H-SiC onto SiO(2), GaN and Al(2)O(3) substrates using a thermal release tape is demonstrated to enable EG films amenable for use in device fabrication on arbitrary substrates and films that are deemed most beneficial to carrier transport.
Abstract: In order to make graphene technologically viable, the transfer of graphene films to substrates appropriate for specific applications is required. We demonstrate the dry transfer of epitaxial graphene (EG) from the C-face of 4H-SiC onto SiO2, GaN and Al2O3 substrates using a thermal release tape. We further report on the impact of this process on the electrical properties of the EG films. This process enables EG films to be used in flexible electronic devices or as optically transparent contacts.
TL;DR: In this paper, optical spectroscopy on two-dimensional self-organized layers of a perovskite has been carried out and the exciton-phonon interaction was found to be more than one order of magnitude higher than in GaAs QWs.
Abstract: We report on optical spectroscopy (photoluminescence and photoluminescence excitation) on two-dimensional self-organized layers of $(C_{6}H_{5}C_{2}H_{4}-NH_{3})_{2}PbI_{4}$ perovskite. Temperature and excitation power dependance of the optical spectra gives a new insight into the excitonic and phononic properties of this hybrid organic/inorganic semiconductor. In particular, exciton-phonon interaction is found to be more than one order of magnitude higher than in GaAs QWs. As a result, photoluminescence emission lines have to be interpreted in the framework of a polaron model.
TL;DR: The most relevant results indicate that Young's modulus is considerable higher than those determined for graphene and carbon nanotubes, suggesting the potential for using carbon nanostructures in nano-electronic devices in the near future.
Abstract: Herein, we investigate the structural, electronic and mechanical properties of zigzag graphene nanoribbons upon the presence of stress applying Density Functional Theory within the GGA-PBE approximation. The uniaxial stress is applied along the periodic direction, allowing a unitary deformation in the range of +/- 0.02%. The mechanical properties show a linear-response within that range while the non-linear dependence is found for higher strain. The most relevant results indicate that Young's modulus is considerable higher than those determined for graphene and carbon nanotubes. The geometrical reconstruction of the C-C bonds at the edges hardness the nanostructure. Electronic structure features are not sensitive to strain in this linear elastic regime, being an additional promise for the using of carbon nanostructures in nano-electronic devices in the near future.
TL;DR: It is shown that the spinodal and miscibility gaps generally shrink as the host particle size decreases to the nanoscale, which is motivated by recent experiments on the high-rate Li-ion battery material LiFePO(4).
Abstract: Using a recently-proposed mathematical model for intercalation dynamics in phase-separating materials [Singh, Ceder, Bazant, Electrochimica Acta 53, 7599 (2008)], we show that the spinodal and miscibility gaps generally shrink as the host particle size decreases to the nano-scale. Our work is motivated by recent experiments on the high-rate Li-ion battery material LiFePO4; this serves as the basis for our examples, but our analysis and conclusions apply to any intercalation material. We describe two general mechanisms for the suppression of phase separation in nano-particles: (i) a classical bulk effect, predicted by the Cahn-Hilliard equation, in which the diffuse phase boundary becomes confined by the particle geometry; and (ii) a novel surface effect, predicted by chemical-potential-dependent reaction kinetics, in which insertion/extraction reactions stabilize composition gradients near surfaces in equilibrium with the local environment. Composition-dependent surface energy and (especially) elastic strain can contribute to these effects but are not required to predict decreased spinodal and miscibility gaps at the nano-scale.
TL;DR: In this paper, the elastic properties of MgSiO3 perovskite, the major mineral of the lower mantle, at relevant thermodynamic conditions were analyzed using molecular dynamics simulations.
Abstract: The temperature anomalies in the Earth's mantle associated with thermal convection1 can be inferred from seismic tomography, provided that the elastic properties of mantle minerals are known as a function of temperature at mantle pressures. At present, however, such information is difficult to obtain directly through laboratory experiments. We have therefore taken advantage of recent advances in computer technology, and have performed finite-temperature ab initio molecular dynamics simulations of the elastic properties of MgSiO3 perovskite, the major mineral of the lower mantle, at relevant thermodynamic conditions. When combined with the results from tomographic images of the mantle, our results indicate that the lower mantle is either significantly anelastic or compositionally heterogeneous on large scales. We found the temperature contrast between the coldest and hottest regions of the mantle, at a given depth, to be about 800K at 1000 km, 1500K at 2000 km, and possibly over 2000K at the core-mantle boundary.
TL;DR: In this article, the spin-filter and spin-valve are conserved in a single device simultaneously, which opens a new way to the application of all-carbon composite spintronics.
Abstract: We report ab initio calculations of spin-dependent transport in single atomic carbon chains bridging two zigzag graphene nanoribbon electrodes. Our calculations show that carbon atomic chains coupled to graphene electrodes are perfect spin-filters with almost 100 % spin polarization. Moreover, carbon atomic chains can also show a very large bias-dependent magnetoresistance up to 1000000 % as perfect spin-valves. These two spin-related properties are independent on the length of carbon chains. Our report, the spin-filter and spin-valve are conserved in a single device simultaneously, opens a new way to the application of all-carbon composite spintronics.
TL;DR: In this paper, a voltage-induced magnetization switching in ferromagnetic metals was demonstrated in the direction of the magnetic easy axis between in-plane and perpendicular directions by employing a perpendicularly magnetized film.
Abstract: Growing demands for the voltage-driven spintronic applications with ultralow-power consumption have led to new interest in exploring the voltage-induced magnetization switching in ferromagnetic metals. In this study, we observed a large perpendicular magnetic anisotropy change in Au(001) / ultrathin Fe80Co20(001) / MgO(001) / Polyimide / ITO junctions, and succeeded in realizing a clear switching of magnetic easy axis between in-plane and perpendicular directions. Furthermore, employing a perpendicularly magnetized film, voltage-induced magnetization switching in the perpendicular direction under the assistance of magnetic fields was demonstrated. These pioneering results may open a new window of electric-field controlled spintronics devices.
TL;DR: It is quantitatively demonstrate that crystals tend to adopt one of the few simplest structures consistent with their chemistry, providing a thermodynamic justification of Pauling's fifth rule.
Abstract: We explore whether the topology of energy landscapes in chemical systems obeys any rules and what these rules are. To answer this and related questions we use several tools: (i)Reduced energy surface and its density of states, (ii) descriptor of structure called fingerprint function, which can be represented as a one-dimensional function or a vector in abstract multidimensional space, (iii) definition of a ''distance'' between two structures enabling quantification of energy landscapes, (iv) definition of a degree of order of a structure, and (v) definitions of the quasi-entropy quantifying structural diversity. Our approach can be used for rationalizing large databases of crystal structures and for tuning computational algorithms for structure prediction. It enables quantitative and intuitive representations of energy landscapes and reappraisal of some of the traditional chemical notions and rules. Our analysis confirms the expectations that low-energy minima are clustered in compact regions of configuration space ("funnels") and that chemical systems tend to have very few funnels, sometimes only one. This analysis can be applied to the physical properties of solids, opening new ways of discovering structure-property relations. We quantitatively demonstrate that crystals tend to adopt one of the few simplest structures consistent with their chemistry, providing a thermodynamic justification of Pauling's fifth rule.
TL;DR: In this paper, a simple scheme for introducing long-range RPA correlation into density functional theory is proposed and tested, which provides good thermochemical results and models van derWaals interactions accurately.
Abstract: We recently demonstrated a connection between the random phase approximation (RPA) and coupled cluster theory [J. Chem. Phys. 129, 231101 (2008)]. Based on this result, we here propose and test a simple scheme for introducing long-range RPA correlation into density functional theory. Our method provides good thermochemical results and models van derWaals interactions accurately.
TL;DR: In this article, an element-specific investigation of electronic and magnetic properties of the graphene/Ni(111) system was performed using magnetic circular dichroism, and the occurrence of an induced magnetic moment of the carbon atoms in the graphene layer aligned parallel to the Ni 3d magnetization was observed.
Abstract: We report an element-specific investigation of electronic and magnetic properties of the graphene/Ni(111) system. Using magnetic circular dichroism, the occurrence of an induced magnetic moment of the carbon atoms in the graphene layer aligned parallel to the Ni 3d magnetization is observed. We attribute this magnetic moment to the strong hybridization between C $\pi$ and Ni 3d valence band states. The net magnetic moment of carbon in the graphene layer is estimated to be in the range of $0.05-0.1 \mu_B$ per atom.