scispace - formally typeset
Journal ArticleDOI

Low-threshold continuous-wave 1.5-/spl mu/m GaInNAsSb lasers grown on GaAs

TLDR
In this article, the first continuous-wave edge-emitting GaAs-based laser operation beyond 1.5 µm was reported, with a threshold current density of 1.06 kA/cm/sup 2, external quantum efficiency of 31%, and characteristic temperature T/sub 0/ of 139 K.
Abstract
We present the first continuous-wave (CW) edge-emitting lasers at 1.5 /spl mu/m grown on GaAs by molecular beam epitaxy (MBE). These single quantum well (QW) devices show dramatic improvement in all areas of device performance as compared to previous reports. CW output powers as high as 140 mW (both facets) were obtained from 20 /spl mu/m /spl times/ 2450 /spl mu/m ridge-waveguide lasers possessing a threshold current density of 1.06 kA/cm/sup 2/, external quantum efficiency of 31%, and characteristic temperature T/sub 0/ of 139 K from 10/spl deg/C-60/spl deg/C. The lasing wavelength shifted 0.58 nm/K, resulting in CW laser action at 1.52 /spl mu/m at 70/spl deg/C. This is the first report of CW GaAs-based laser operation beyond 1.5 /spl mu/m. Evidence of Auger recombination and intervalence band absorption was found over the range of operation and prevented CW operation above 70/spl deg/C. Maximum CW output power was limited by insufficient thermal heatsinking; however, devices with a highly reflective (HR) coating applied to one facet produced 707 mW of pulsed output power limited by the laser driver. Similar CW output powers are expected with more sophisticated packaging and further optimization of the gain region. It is expected that such lasers will find application in next-generation optical networks as pump lasers for Raman amplifiers or doped fiber amplifiers, and could displace InP-based lasers for applications from 1.2 to 1.6 /spl mu/m.

read more

Citations
More filters
Journal ArticleDOI

Dilute nitride GaInNAs and GaInNAsSb solar cells by molecular beam epitaxy

TL;DR: In this article, the use of biased deflection plates during GaInNAs growth improved the performance of dilute nitride solar cells and achieved the best performance in terms of dark current density, open-circuit voltage, and fill factor.
Journal ArticleDOI

Physics of optoelectronic devices

M. Henini
TL;DR: In this article, the authors present materials for light-emitting diodes in the visible spectrum (400 700 nm) are semiconductors with bandgaps between 1.8 and 3.1 eV, with Eg (eV) = hν = 1240 /λ (nm).
Journal ArticleDOI

Band engineering in dilute nitride and bismide semiconductor lasers

TL;DR: In this article, the effects of spin-orbit-splitting energy on the dominant Auger recombination loss mechanism were investigated for high-mismatched semiconductor alloys such as GaInNAs and GaBiAs.
Journal ArticleDOI

Band engineering in dilute nitride and bismide semiconductor lasers

TL;DR: In this paper, the electronic structure of GaNAs and GaBiAs has been reviewed and their consequences for ideal lasers have been discussed, and substantial progress has been made in the demonstration of actual GaInNAs telecomm lasers.
Journal ArticleDOI

Low threshold InGaAsN/GaAs lasers beyond 1500 nm

TL;DR: In this paper, a threshold current density of 690 A/cm 2 was achieved for an emission wavelength of 1400nm with 1200μm long devices. But no indications for 3D growth are detected and carrier localization is below 25meV.
References
More filters
Journal ArticleDOI

The role of Sb in the MBE growth of (GaIn)(NAsSb)

TL;DR: In this paper, the role of Sb as an alloy constituent as well as a surfactant in the growth of this pentanary alloy was elucidated, and compositional changes of the material resulting from the addition of sb were shown.
Journal ArticleDOI

Long-wavelength GaInNAs(Sb) lasers on GaAs

TL;DR: In this paper, the results of photoluminescence, as well as in-plane laser studies, made with these combinations of materials were presented, with GaAs or GaNAsSb barriers, the blue shift due to post-growth annealing is suppressed, and longer wavelength laser emission is achieved.
Journal ArticleDOI

GaInNAsSb for 1.3-1.6-/spl mu/m-long wavelength lasers grown by molecular beam epitaxy

TL;DR: In this paper, Sb was added to the GaInNAs quaternary to achieve longer luminescent wavelengths while maintaining high intensity, and three QW GaIn-NAsSb in-plane lasers were fabricated with room-temperature pulsed operation out to 1.49 /spl mu/m.
Journal ArticleDOI

Low-threshold CW GaInNAsSb/GaAs laser at 1.49 μm

TL;DR: In this article, a low-threshold room temperature continuous wave 149'µm GaInNAsSb laser was used with a high external quantum efficiency of 40% and maximum output power of 30'mW from both facets.
Journal ArticleDOI

Temperature analysis and characteristics of highly strained InGaAs-GaAsP-GaAs (/spl lambda/ > 1.17 /spl mu/m) quantum-well lasers

TL;DR: In this paper, the temperature analysis of the threshold current and the external differential quantum efficiency (T/sub 0) was studied as simple functions of the temperature dependence of the physical parameters of the semiconductor lasers.
Related Papers (5)