scispace - formally typeset
Journal ArticleDOI

Manganese oxides for lithium batteries

Reads0
Chats0
About
This article is published in Progress in Solid State Chemistry.The article was published on 1997-01-01. It has received 1332 citations till now. The article focuses on the topics: Lithium vanadium phosphate battery & Lithium.

read more

Citations
More filters
Journal ArticleDOI

Porous sphere-like LiNi0.5Mn1.5O4-CeO2 composite with high cycling stability as cathode material for lithium-ion battery

TL;DR: LiNi0.5Mn1.5O4-CeO2 as mentioned in this paper is a new type of microsized porous spherical LiNi 0.5mn 1.5 o4 cathode material composed of aggregated nanosized particles with P4332 space groups was prepared by an ethanol-assisted hydrothermal method.
Journal ArticleDOI

Synthesis and electrochemistry of Li3MnO4: Mn in the +5 oxidation state

TL;DR: In this article, the electrochemical properties of tetrahedrally coordinated Mn in the +5oxidation state were investigated and an initial capacity of about 275 mAh/g in lithiumcells was achieved.
Journal ArticleDOI

3d-Transition metal doped spinels as high-voltage cathode materials for rechargeable lithium-ion batteries

TL;DR: In this article, a review of 3d-transition metal doped spinels for Li-ion batteries is presented, which includes different routes of synthesis, structural studies, electrode preparation, electrochemical performance and mechanism of Li-extraction/insertion, thermal stability as well as degradation mechanisms.
Journal ArticleDOI

Optimized 4‐V Spinel Cathode Material with High Energy Density for Li‐Ion Cells Operating at 60 °C

TL;DR: In this article, LiMn2O4 spinels are synthesized via a conventional solid-state reaction using MnO2 and Li2CO3 at 770 °C for 10 h and using a solution-based coating method in bulk scale (>20 kg).
Journal ArticleDOI

Experimental investigation and simulation of temperature distributions in a 16Ah-LiMnNiCoO2 battery during rapid discharge rates

TL;DR: In this article, the surface temperature distributions on a superior lithium polymer battery (SLPB) with lithium manganese nickel cobalt oxide (LiMnNiCoO2) cathode material (16 Ah capacity) at C/8, C/4, c/2, 1C, 2C, and 3C discharge rates are presented.
References
More filters
Journal ArticleDOI

LixCoO2 (0<x<-1): A new cathode material for batteries of high energy density

TL;DR: In this paper, a new system LixCoO2 (0 Li x CoO 2 Li ) is proposed, which shows low overvoltages and good reversibility for current densities up to 4 mA cm−2 over a large range of x.
Journal ArticleDOI

Zero‐Strain Insertion Material of Li [ Li1 / 3Ti5 / 3 ] O 4 for Rechargeable Lithium Cells

TL;DR: In this paper, a defect spinel-framework structure was examined in nonaqueous lithium cells and it was shown that the lattice dimension did not change during the reaction since the reaction consists of lithium ion and electron insertion into/extraction from the solid matrix without a noticeable change in lattice dimensions.
Journal ArticleDOI

Lithium insertion into manganese spinels

TL;DR: In this article, Li has been inserted chemically and electrochemically into Mn3O4 and Li[Mn2]O4 at room temperature from X-ray diffraction.
Journal ArticleDOI

Electrochemical and In Situ X‐Ray Diffraction Studies of Lithium Intercalation in Li x CoO2

TL;DR: In this article, high precision voltage measurements and in situ x-ray diffraction indicate a sequence of three distinct phase transitions as varies from 1 to 0.4, two of which are situated slightly above and below and are caused by an order/disorder transition of the lithium ions.
Journal ArticleDOI

Improved capacity retention in rechargeable 4 V lithium/lithium- manganese oxide (spinel) cells

TL;DR: In this article, the authors improved the rechargeable capacity of 4 V LixMn2O4 spinel cathodes by modifying the composition of the spinel electrode, achieving a capacity in excess of 100 mAh/g in flooded-electrolyte lithium cells.
Related Papers (5)