Institution
National Institute of Technology, Meghalaya
Education•Shillong, India•
About: National Institute of Technology, Meghalaya is a education organization based out in Shillong, India. It is known for research contribution in the topics: Control theory & Computer science. The organization has 503 authors who have published 1062 publications receiving 6818 citations. The organization is also known as: NIT Meghalaya & NITM.
Papers
More filters
••
TL;DR: In this article, the authors identify the major challenges of islanding detection in the grid-connected photovoltaic system (GCPVS) and suggest an appropriate IDM based on the criteria preference of the decision-maker.
16 citations
••
TL;DR: This research suggests an appropriate islanding-detection method (IDM) for grid-connected solar photovoltaic system (GCSPVS) application using multi-criteria decision-making (MCDM) analysis using the analytic network process (ANP).
16 citations
••
TL;DR: In this paper, the heat transfer of the combined magnetohydrodynamic (MHD) and electroosmotic flow (EOF) of non-Newtonian fluid in a rotating microchannel is analyzed.
Abstract: The heat transfer of the combined magnetohydrodynamic (MHD) and electroosmotic flow (EOF) of non-Newtonian fluid in a rotating microchannel is analyzed. A couple stress fluid model is scrutinized to simulate the rheological characteristics of the fluid. The exact solution for the energy transport equation is achieved. Subsequently, this solution is utilized to obtain the flow velocity and volume flow rates within the flow domain under appropriate boundary conditions. The obtained analytical solution results are compared with the previous data in the literature, and good agreement is obtained. A detailed parametric study of the effects of several factors, e.g., the rotational Reynolds number, the Joule heating parameter, the couple stress parameter, the Hartmann number, and the buoyancy parameter, on the flow velocities and temperature is explored. It is unveiled that the elevation in a couple stress parameter enhances the EOF velocity in the axial direction.
16 citations
••
TL;DR: In this article, an experimental study is performed for examining the electroplated copper thickness of the plastic EDM electrode and its performances in the field of electro discharge machining (EDM), and it is found that the electrode can be regarded as a viable tool for rough cutting or semi-finishing cut EDM functions.
Abstract: The importance of rapid tooling (RT) and additive manufacturing (AM) appears to be indispensable for boosting the process of manufacturing and expanding the horizon of production technology worldwide. This concept draws the attention of numerous scholars to arrive at a conclusive theory for the widespread utilization of RT. This study attempts to determine the viability and performance of an RT electrode in the field of electro discharge machining (EDM). The electrode prototype is made using an acrylonitrile butadiene styrene (ABS) plastic by fused deposition modeling (FDM), an AM technique, electroplated with copper of desired thickness, and used in die sinking EDM of D2 steel. The scanning electron microscope analysis of the electroplated samples confirms that it is possible to obtain the desired thickness of the metal by electroplating on any electrically conductive surface. In the present work, an experimental study is performed for examining the electroplated copper thickness of the plastic EDM electrode and its performances. It is found that the electroplated ABS plastic EDM RT electrode successfully performs the machining operation of D2 steel, and the results are comparable with a solid electrode. The study reveals that the RT electrode can be regarded as a viable tool for rough cutting or semi-finishing cut EDM functions. The experimental results are thoroughly discussed, examined, analyzed, and evaluated for the purpose of developing the appropriate form of the concept.
16 citations
••
TL;DR: In this article, the tensile and compressive performance of single-lap joint of green composites (bamboo fiber/Polylactic acid (PLA)) has been experimentally investigated.
16 citations
Authors
Showing all 517 results
Name | H-index | Papers | Citations |
---|---|---|---|
Sudip Misra | 48 | 535 | 9846 |
Robert Wille | 43 | 457 | 6881 |
Paul C. van Oorschot | 41 | 150 | 21478 |
Sourav Das | 30 | 174 | 4026 |
Mukul Pradhan | 23 | 53 | 1990 |
Bibhuti Bhusan Biswal | 20 | 155 | 1413 |
Naba K. Nath | 20 | 39 | 1813 |
Atanu Singha Roy | 19 | 48 | 1071 |
Akhilendra Pratap Singh | 19 | 99 | 1775 |
Abhishek Singh | 19 | 107 | 1354 |
Vinay Kumar | 19 | 130 | 1442 |
Dipankar Das | 19 | 67 | 1904 |
Gayadhar Panda | 18 | 123 | 1093 |
Gitish K. Dutta | 16 | 26 | 1168 |
Kamalika Datta | 15 | 69 | 676 |